Rotor Surface Ferrite Permanent Magnets in Electrical Machines: Advantages and Limitations
Authors:
- 2 March 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 64 (7) , 5314-5322
Abstract
Permanent-magnet synchronous machines (PMSM) are gaining a foothold in a growing number of applications. However, the high cost of these machines compared with the prices of induction motors, whose production process is mature and material costs are low, limits the use of PMSMs with rare-earth permanent magnets in many potential cases. A viable design solution for a PMSM cost reduction is to use low-cost ferrite magnets instead of rare-earth ones. Nevertheless, it is challenging to apply ferrite magnets to a high-power rotor surface magnet PMSM because of their weaker magnetic properties compared with the rare-earth magnets and the risk of irreversible demagnetization. This paper aims to investigate the boundaries and limiting factors for achieving the maximum tangential stress and linear current density at a certain air gap diameter by using rotor surface ferrite magnets. The computed results are validated by a prototype, which was designed within the described boundaries.Keywords
This publication has 21 references indexed in Scilit:
- An Analytical Approach to Design the PM in PMAREL Motors Robust Toward the DemagnetizationIEEE Transactions on Energy Conversion, 2016
- Multidisciplinary Design Process of a 6-Slot 2-Pole High-Speed Permanent-Magnet Synchronous MachineIEEE Transactions on Industrial Electronics, 2015
- Inductance Calculation of Tooth-Coil Permanent-Magnet Synchronous MachinesIEEE Transactions on Industrial Electronics, 2014
- Current linkage harmonics and air-gap harmonic leakage inductance of tooth-coil permanent-magnet synchronous machines2013
- Rotor surface ferrite magnet synchronous machine for generator use in a hybrid application Electro-magnetic and thermal analysis2013
- Eddy current loss calculation in rotor back iron for concentrated winding PM generator2012
- Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM MachinesIEEE Transactions on Industrial Electronics, 2012
- Influence of Additional Air Gaps Between Stator Segments on Cogging Torque of Permanent-Magnet Machines Having Modular StatorsIEEE Transactions on Magnetics, 2011
- Core loss prediction using magnetic circuit model for fractional-slot concentrated-winding interior permanent magnet machines2010
- Eddy-Current Losses in the Solid Back-Iron of PM Machines for different Concentrated Fractional Pitch Windings2007