Hot Deformation Behavior and Mechanisms of SiC Particle Reinforced Al-Zn-Mg-Cu Alloy Matrix Composites
Open Access
- 29 November 2023
- Vol. 16 (23) , 7430
Abstract
A systematic and comprehensive analysis of the hot deformation and mechanisms of SiC particle-reinforced aluminum matrix composites is significant for optimizing the processing of the composites and obtaining the desired components. Based on this, related research on 11 vol% SiCp particle-reinforced 7050Al matrix composites was carried out. Hot compression experiments were carried out on the Gleeble-3500 thermal simulator to study the hot deformation behavior of composites at the temperature of 370–520 °C and strain rate of 0.001–10 s−1. The hyperbolic sine constitutive equation of the material was established, and the processing map was calculated. Combining the typical metallograph and misorientation angle distribution, the microstructure evolution mechanism of composites was analyzed, and the effect of particles on recrystallization behavior was investigated. Under certain process conditions, the dominant deformation mechanism of composites changed from dynamic recovery (DRV) to dynamic recrystallization (DRX), and the grain boundary sliding mechanism began to play a role. In addition, high temperature tensile and elongation at break were tested, and it was found that the dominant form of fracture failure changed from brittle fracture of the particles to ductile fracture of the matrix as the temperature increased.Keywords
Funding Information
- National Key Research and Development Program of China (2021YFB3701202)
This publication has 27 references indexed in Scilit:
- Fabrication, Mechanical and Wear Characterization of Silicon Carbide Reinforced Aluminium 7075 Metal Matrix CompositeSilicon, 2021
- Microstructure and mechanical behaviors of 6061 Al matrix hybrid composites reinforced with SiC and stainless steel particlesMaterials Science and Engineering: A, 2021
- Hot deformation behaviour and microstructure evolution of TiAl-based alloy reinforced with carbide particlesIntermetallics, 2020
- Comportamiento del flujo de esfuerzo y análisis microestructural de compuestos de matriz de aluminio deformados en caliente y reforzados con partículas de la aleación con memoria de forma CuZnAlNiRevista de Metalurgia, 2020
- Hot-Deformation Behavior and Microstructure Evolution of the Dual-Scale SiCp/A356 Composites Based on Optimal Hot-Processing ParametersMaterials, 2020
- Effects of hot extrusion on microstructure and mechanical properties of Mg matrix composite reinforced with deformable TC4 particlesJournal of Magnesium and Alloys, 2020
- Microstructural homogeneity, mechanical properties, and wear behavior of in situ Mg2Si particles reinforced Al–matrix composites fabricated by hot rollingJournal of Materials Research and Technology, 2020
- Al-Mg-Si/SiC laminated composites: Fabrication, architectural characteristics, toughness, damage tolerance, fracture mechanismsComposites Part B: Engineering, 2017
- Metal Matrix CompositesAnnual Review of Materials Research, 2010
- Strength of Al-Zn-Mg-Cu matrix composite reinforced with SiC particlesMetallurgical and Materials Transactions A, 2002