Implementation of an YSZ coating material to prevent clogging of the submerged entry nozzle (SEN) during continuous casting of Ce-treated steels
- 9 November 2016
- journal article
- research article
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
- Vol. 45 (2) , 105-113
Abstract
The possibility to reduce clogging in the submerged entry nozzle (SEN) during continuous casting of Ce alloyed stainless steels has been studied. This was done by implementing a new plasma coating material, consisting of yttria-stabilised zirconia (YSZ). The coating was first tested in pilot–plant trials; where the amount of steel teemed through the plasma-coated nozzles was monitored. Thereafter, samples of the coatings from the nozzles were studied using a FEG-SEM equipped with EDS. In addition, the coating material was tested in industrial trials where the performance was judged with respect to the clogging tendency detected as the movement of the stopper rod. The results from both the pilot–plant trials and industrial trials showed that the use of an YSZ coating led to a decreased clogging tendency during the casting in comparison to when using an uncoated SEN. Specifically, the pilot–plant trials showed that the clogging factor was lowered when implementing the YSZ coatings. Furthermore, the industrial trials showed that the clogging tendency, measured by the stopper rod movements, were lower when implementing the YSZ coating.Keywords
Funding Information
- VINNOVA
This publication has 7 references indexed in Scilit:
- Studies of effect of glass/silicon powder coatings on clogging behaviour of submerged entry nozzles when using REM alloyed stainless steelsIronmaking & Steelmaking: Processes, Products and Applications, 2011
- Pilot plant study of clogging rates in low carbon and stainless steel gradesIronmaking & Steelmaking: Processes, Products and Applications, 2011
- Pilot plant study of nozzle clogging mechanisms during casting of REM treated stainless steelsIronmaking & Steelmaking: Processes, Products and Applications, 2011
- Vapor Phase Deposition Using Plasma Spray-PVD™Journal of Thermal Spray Technology, 2009
- Y2O3 stabilized ZrO2 thin films deposited by electron beam evaporation: Structural, morphological characterization and laser induced damage thresholdApplied Surface Science, 2006
- Clogging in submerged entry nozzlesSteel Research, 2000
- Research on determination of the rare-earth content in metal phases of steelMetallurgical Transactions A, 1986