Influence of a Hydrogen Addition to the Inert Gas and Subsequent Heat Treatments on the Microstructure and Mechanical Properties of Magnesium WE43 Fabricated by PBF‐LB/M
Open Access
- 23 February 2025
- journal article
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (14)
Abstract
Additive manufacturing of magnesium alloys shows great potential for producing patient‐specific resorbable implants or lightweight parts. However, due to the reactive behavior, especially in the laser‐based powder bed fusion (PBF‐LB) fabrication process, the processing window to manufacture almost pore‐free parts is narrow compared to other materials such as titanium or steel. This article investigates optimal processing conditions for the PBF‐LB/M of WE43. To reduce the reactivity of the magnesium melt by limiting the interaction with remaining oxygen, a 3 vol% hydrogen admixture to the argon inert gas is investigated. Furthermore, long‐duration heat treatments are investigated in the range of 250–350 °C for 48 h. This study evaluates the impact of both methods on mechanical properties and microstructure. Although hydrogen seems to have no significant influence on the relative density, the microstructure, and the phase composition, it can slightly increase the tensile strength and elongation at break in the as‐built state. A heat treatment of 250 °C can increase the elongation at the break without impeding the tensile strength.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (409485213)
This publication has 42 references indexed in Scilit:
- PBF-LB of large-area magnesium WE43 structures surface-enhanced by plasma electrolytic oxidationProgress in Additive Manufacturing, 2024
- Residual oxygen content and powder recycling: effects on microstructure and mechanical properties of additively manufactured Ti-6Al-4V partsThe International Journal of Advanced Manufacturing Technology, 2022
- The potential of SLM technology for processing magnesium alloys in aerospace industryArchives of Civil and Mechanical Engineering, 2020
- Investigation of the Susceptibility of the WE54 Magnesium-Based Alloy to Stress Corrosion CrackingJournal of Materials Engineering and Performance, 2020
- Laseradditive Fertigung dünnwandiger Magnesiumbauteile2019
- Laser additive manufacturing of biodegradable magnesium alloy WE43: A detailed microstructure analysisActa Biomaterialia, 2019
- Influence of design and postprocessing parameters on the degradation behavior and mechanical properties of additively manufactured magnesium scaffoldsActa Biomaterialia, 2019
- Microstructural porosity in additive manufacturing: The formation and detection of pores in metal parts fabricated by powder bed fusionJournal of Advanced Manufacturing and Processing, 2019
- Hydrogen trapping and hydrogen embrittlement of Mg alloysJournal of Materials Science, 2017
- Mg-Y (Magnesium-Yttrium)Journal of Phase Equilibria and Diffusion, 2010