In Situ Ageing Assessment During the Manufacturing of a Large-Scale A357-AlSi7Mg0.6 Component by Laser Powder Bed Fusion
Open Access
Abstract
Additive manufacturing (AM) is increasingly being considered to produce large aluminum components for aeronautical applications. Larger parts lead to longer build durations, numerous lasers and may result in prolonged exposure to high temperatures if heat dissipation is insufficient, causing in situ ageing during manufacturing and a consequent reduction in the mechanical properties of as-built aluminum alloys. This study investigates the relationship between process parameters, heat dissipation, and resulting mechanical properties in large-scale A357-AlSi7Mg0.6 aluminum alloy manufactured by laser powder bed fusion (LPBF). In the context of developing geometrically complex casings or components using LPBF equipment with multiple lasers (up to 12), mechanical testing of first prototypes revealed up to a 30% reduction in mechanical properties in certain regions, attributed to insufficient heat dissipation during the build. Thermal modelling and in situ experimental measurements have shown that the high thermal mass and extended build times of large components lead to non-uniform temperature distributions, promoting undesired microstructural evolution and advanced over-ageing, effects that are generally less pronounced in smaller specimens reported in the literature. Hardness mapping on samples subjected to monitored ageing ranges, as well as on additively manufactured rods with deliberate geometries for heat accumulation, confirmed that areas with insufficiently optimized support show significant decreases in hardness due to inefficient heat dissipation. A numerical model was developed to link the hardness evolutions to both ageing time and temperature, enabling improved predictions of microstructure and properties as a function of build and heat-removal strategies. These findings emphasize the critical importance of support structure optimization for both mechanical support and thermal management during LPBF, as well as the need for tailored process and post-process heat treatments to achieve consistent and reliable mechanical properties in large, additively manufactured aluminum alloy components.Keywords
This publication has 30 references indexed in Scilit:
- Precipitate evolution and related strengthening during long term ageing of 2618A aluminium alloyActa Materialia, 2025
- Analytical Modeling of Selective Laser-Melting Temperature of AlSi10Mg AlloyAdditive Manufacturing Frontiers, 2025
- High-Performance Aluminum-Based Materials Processed by Laser Powder Bed Fusion: Process, Microstructure, Defects and Properties CoordinationAdditive Manufacturing Frontiers, 2024
- Defect-Correlated Vickers Microhardness of Al-Si-Mg Alloy Manufactured by Laser Powder Bed Fusion with Post-process Heat TreatmentsJournal of Materials Engineering and Performance, 2022
- Role of Direct Aging and Solution Treatment on Hardness, Microstructure and Residual Stress of the A357 (AlSi7Mg0.6) Alloy Produced by Powder Bed FusionMetallurgical and Materials Transactions B, 2021
- Research trends in laser powder bed fusion of Al alloys within the last decadeAdditive Manufacturing, 2020
- A Microscale Study of Thermal Field and Stresses during Processing of Ti6Al4V Powder Layer by Selective Laser MeltingLasers in Manufacturing and Materials Processing, 2018
- Low temperature annealing dedicated to AlSi10Mg selective laser melting productsJournal of Alloys and Compounds, 2017
- Studies of Orientations of β″ Precipitates in Al-Mg-Si-(Cu) Alloys by Electron Diffraction and Transition Matrix AnalysisMetallurgical and Materials Transactions A, 2011
- Investigations on residual stresses and deformations in selective laser meltingProduction Engineering, 2009