Thomas Perrin
Research Subjects
Thomas Perrin has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Alexis Deschamps
SIMaP, University of Grenoble Alpes, CNRS, Grenoble INP, Grenoble, France
6 shared publications - Frédéric De Geuser
Université Grenoble Alpes, CNRS, Grenoble INP, SIMaP, F-38000 Grenoble, France
6 shared publications - Pierre Heugue
Safran Transmission Systems, 18, Boulevard Louis Seguin, 92700 Colombes, France
5 shared publications Arthur Després
3 shared publications- Arthur Després
SIMaP Grenoble, 1130, Rue de la Piscine, 38402 Saint-Martin d’Hères, France
2 shared publications Julien Barlier
2 shared publications
Latest Publications
- Open Access
In Situ Ageing Assessment During the Manufacturing of a Large-Scale A357-AlSi7Mg0.6 Component by Laser Powder Bed Fusion
Additive manufacturing (AM) is increasingly being considered to produce large aluminum components for aeronautical applications. Larger parts lead to longer build durations, numerous lasers and may result in prolonged exposure to high temperatures if heat dissipation is insufficient, causing in situ ageing during manufacturing and a consequent reduction in the mechanical properties of as-built aluminum alloys. This study investigates the relationship between process parameters, heat dissipation, and resulting mechanical properties in large-scale A357-AlSi7Mg0.6 aluminum alloy manufactured by laser powder bed fusion (LPBF). In the context of developing geometrically complex casings or components using LPBF equipment with multiple lasers (up to 12), mechanical testing of first prototypes revealed up to a 30% reduction in mechanical properties in certain regions, attributed to insufficient heat dissipation during the build. Thermal modelling and in situ experimental measurements have shown that the high thermal mass and extended build times of large components lead to non-uniform temperature distributions, promoting undesired microstructural evolution and advanced over-ageing, effects that are generally less pronounced in smaller specimens reported in the literature. Hardness mapping on samples subjected to monitored ageing ranges, as well as on additively manufactured rods with deliberate geometries for heat accumulation, confirmed that areas with insufficiently optimized support show significant decreases in hardness due to inefficient heat dissipation. A numerical model was developed to link the hardness evolutions to both ageing time and temperature, enabling improved predictions of microstructure and properties as a function of build and heat-removal strategies. These findings emphasize the critical importance of support structure optimization for both mechanical support and thermal management during LPBF, as well as the need for tailored process and post-process heat treatments to achieve consistent and reliable mechanical properties in large, additively manufactured aluminum alloy components.
Open AccessIn Situ Ageing Assessment During the Manufacturing of a Large-Scale A357-AlSi7Mg0.6 Component by Laser Powder Bed Fusion
Additive manufacturing (AM) is increasingly being considered to produce large aluminum components for aeronautical applications. Larger parts lead to longer build durations, numerous lasers and may result in prolonged exposure to high temperatures if heat dissipation is insufficient, causing in situ ageing during manufacturing and a consequent reduction in the mechanical properties of as-built aluminum alloys. This study investigates the relationship between process parameters, heat dissipation, and resulting mechanical properties in large-scale A357-AlSi7Mg0.6 aluminum alloy manufactured by laser powder bed fusion (LPBF). In the context of developing geometrically complex casings or components using LPBF equipment with multiple lasers (up to 12), mechanical testing of first prototypes revealed up to a 30% reduction in mechanical properties in certain regions, attributed to insufficient heat dissipation during the build. Thermal modelling and in situ experimental measurements have shown that the high thermal mass and extended build times of large components lead to non-uniform temperature distributions, promoting undesired microstructural evolution and advanced over-ageing, effects that are generally less pronounced in smaller specimens reported in the literature. Hardness mapping on samples subjected to monitored ageing ranges, as well as on additively manufactured rods with deliberate geometries for heat accumulation, confirmed that areas with insufficiently optimized support show significant decreases in hardness due to inefficient heat dissipation. A numerical model was developed to link the hardness evolutions to both ageing time and temperature, enabling improved predictions of microstructure and properties as a function of build and heat-removal strategies. These findings emphasize the critical importance of support structure optimization for both mechanical support and thermal management during LPBF, as well as the need for tailored process and post-process heat treatments to achieve consistent and reliable mechanical properties in large, additively manufactured aluminum alloy components.
- Open Access
- 10 July 2026
- Published by Elsevier in Materials & Design
- Vol. 269
High-throughput characterization of the effect of quenching rate and dispersoid type on precipitation kinetics in two Al-Zn-Mg-Cu alloys
- 10 July 2026
- Published by Elsevier in Materials & Design
- Vol. 269
Open AccessHigh-throughput characterization of the effect of quenching rate and dispersoid type on precipitation kinetics in two Al-Zn-Mg-Cu alloys
- Open Access
- 5 May 2026
- Published by Elsevier in SSRN Electronic Journal
High-throughput characterization of the effect of quenching rate and dispersoid type on precipitation kinetics in two Al-Zn-Mg-Cu alloys
A high-throughput investigation has been conducted on two Al–Zn–Mg–Cu alloys with a different dispersoid population (Cr or Zr based) to study the influence of quenching rate on precipitation kinetics. We developed a modified Jominy specimen to vary the quench rate down to 1 K.s-1. Across the obtained continuous range of quench rates, microstructure was evaluated using space and time-resolved small-angle X-ray scattering (SAXS), allowing to map the post-quench precipitation kinetics as a function of quench rate. Transmission electron microscopy revealed that Cr-containing dispersoids systematically trigger heterogeneous η-phase precipitation, while Zr-containing dispersoids remain inactive unless recrystallization induces loss of coherency. A critical cooling rate of 30 K.s-1 has been identified from the SAXS data, below which large precipitation-free zones develop and the volume fraction of strengthening precipitates decreases. These quench-induced precipitates modify the precipitation kinetics during ageing, both in terms of volume fraction, average size and precipitate size distribution. The resulting loss of hardness scales at first order with the square root of the precipitate volume fraction, indicating that the reduction in the fraction of homogeneous precipitates dominates over changes in size or spatial distribution.
- 5 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessHigh-throughput characterization of the effect of quenching rate and dispersoid type on precipitation kinetics in two Al-Zn-Mg-Cu alloys
A high-throughput investigation has been conducted on two Al–Zn–Mg–Cu alloys with a different dispersoid population (Cr or Zr based) to study the influence of quenching rate on precipitation kinetics. We developed a modified Jominy specimen to vary the quench rate down to 1 K.s-1. Across the obtained continuous range of quench rates, microstructure was evaluated using space and time-resolved small-angle X-ray scattering (SAXS), allowing to map the post-quench precipitation kinetics as a function of quench rate. Transmission electron microscopy revealed that Cr-containing dispersoids systematically trigger heterogeneous η-phase precipitation, while Zr-containing dispersoids remain inactive unless recrystallization induces loss of coherency. A critical cooling rate of 30 K.s-1 has been identified from the SAXS data, below which large precipitation-free zones develop and the volume fraction of strengthening precipitates decreases. These quench-induced precipitates modify the precipitation kinetics during ageing, both in terms of volume fraction, average size and precipitate size distribution. The resulting loss of hardness scales at first order with the square root of the precipitate volume fraction, indicating that the reduction in the fraction of homogeneous precipitates dominates over changes in size or spatial distribution.
- 9 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Ageing of precipitation-hardened aluminium alloys during service : microstructural evolution and associated mechanical properties
Vieillissement en service d'alliages d’aluminium à durcissement structural : évolution microstructurale et propriétés mécaniques associées: Les carters et couvercles des boîtes de transmission de puissance des turboréacteurs aéronautiques sont principalement fabriqués à partir d’alliages d’aluminium durcis par précipitation. L'une des exigences critiques en matière de conception est leur résistance au vieillissement thermique pendant lefonctionnement, en raison des températures élevées de l’huile contenue dans ces pièces. Les nano-précipités de ces alliages subissent une évolution lors du vieillissement thermique qui entraîne une dégradation des propriétés mécaniques. La compréhension de cette évolution microstructurale et de ses effets sur les propriétés mécaniques sur des périodes pouvant aller jusqu'à 100 000 heures (soit environ 10 ans) est essentielle pour le dimensionnement et la prédiction de la durée de vie de ces composants. La réalisation d'essais expérimentaux sur des durées de vieillissement thermique supérieures à 20 000 heures étant incompatible avec les contraintes des calendriers de développement, il est nécessaire de développer des approches prédictives fiables. Une base de données expérimentales conséquente est nécessaire pour mettre en place et valider de tels modèles prédictifs.Ces travaux de thèses ont consisté à étudier l'évolution des propriétés mécaniques, via un volume important de données expérimentales obtenues à partir d’échantillons soumis à un vieillissement sous gradient de température pour des durées allant jusqu’à 10 000 heures. Ce vieillissement sous gradient thermique a permis de caractériser les évolutions mécaniques et microstructurales sur un spectre continu de températures de vieillissement (de 165°C à 245°C), en s’appuyant notamment sur des techniques de caractérisation à haut débit telles que la diffusion centrale des rayons X à petits angles (SAXS) et à grands angles (WAXS), ou la mesure de profils de dureté. Des vieillissements complémentaires réalisés à température constante ont également permis d’établir des corrélations entre les évolutions de la dureté et des propriétés mécaniques en traction (limite d’élasticité, contrainte à rupture), permettant la prédiction des propriétés en traction à partir des données de dureté obtenues sur les échantillons soumis à un gradient de température de vieillissement. Des analyses locales complémentaires, réalisées en microscopie électronique en transmission (MET) et en sonde atomique tomographique (SAT), ont ponctuellement été utilisées afin de mieux comprendre les mécanismes microstructuraux associés au survieillissement.Cette méthodologie a été appliquée à deux alliages d’aluminium corroyés (2219-T851 et 2618A-T851) et un alliage de fonderie (A357+1wt%Cu-T7), actuellement utilisés ou susceptibles de l’être pour ce type d’applications. Des comportements distincts, impliquant des phénomènes complexes en plus de la croissance et de la coalescence des précipités (tels que des transformations de phases et la stabilisation de précipités métastables) ont été observés dans les différents alliages. La modélisation cinétique via des équivalences temps-température a cependant donné des résultats cohérents, permettant ainsi la prédiction de l’évolution cinétique des propriétés mécaniques des différents alliages pour la gamme de températures étudiée.
- 9 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Ageing of precipitation-hardened aluminium alloys during service : microstructural evolution and associated mechanical properties
Vieillissement en service d'alliages d’aluminium à durcissement structural : évolution microstructurale et propriétés mécaniques associées: Les carters et couvercles des boîtes de transmission de puissance des turboréacteurs aéronautiques sont principalement fabriqués à partir d’alliages d’aluminium durcis par précipitation. L'une des exigences critiques en matière de conception est leur résistance au vieillissement thermique pendant lefonctionnement, en raison des températures élevées de l’huile contenue dans ces pièces. Les nano-précipités de ces alliages subissent une évolution lors du vieillissement thermique qui entraîne une dégradation des propriétés mécaniques. La compréhension de cette évolution microstructurale et de ses effets sur les propriétés mécaniques sur des périodes pouvant aller jusqu'à 100 000 heures (soit environ 10 ans) est essentielle pour le dimensionnement et la prédiction de la durée de vie de ces composants. La réalisation d'essais expérimentaux sur des durées de vieillissement thermique supérieures à 20 000 heures étant incompatible avec les contraintes des calendriers de développement, il est nécessaire de développer des approches prédictives fiables. Une base de données expérimentales conséquente est nécessaire pour mettre en place et valider de tels modèles prédictifs.Ces travaux de thèses ont consisté à étudier l'évolution des propriétés mécaniques, via un volume important de données expérimentales obtenues à partir d’échantillons soumis à un vieillissement sous gradient de température pour des durées allant jusqu’à 10 000 heures. Ce vieillissement sous gradient thermique a permis de caractériser les évolutions mécaniques et microstructurales sur un spectre continu de températures de vieillissement (de 165°C à 245°C), en s’appuyant notamment sur des techniques de caractérisation à haut débit telles que la diffusion centrale des rayons X à petits angles (SAXS) et à grands angles (WAXS), ou la mesure de profils de dureté. Des vieillissements complémentaires réalisés à température constante ont également permis d’établir des corrélations entre les évolutions de la dureté et des propriétés mécaniques en traction (limite d’élasticité, contrainte à rupture), permettant la prédiction des propriétés en traction à partir des données de dureté obtenues sur les échantillons soumis à un gradient de température de vieillissement. Des analyses locales complémentaires, réalisées en microscopie électronique en transmission (MET) et en sonde atomique tomographique (SAT), ont ponctuellement été utilisées afin de mieux comprendre les mécanismes microstructuraux associés au survieillissement.Cette méthodologie a été appliquée à deux alliages d’aluminium corroyés (2219-T851 et 2618A-T851) et un alliage de fonderie (A357+1wt%Cu-T7), actuellement utilisés ou susceptibles de l’être pour ce type d’applications. Des comportements distincts, impliquant des phénomènes complexes en plus de la croissance et de la coalescence des précipités (tels que des transformations de phases et la stabilisation de précipités métastables) ont été observés dans les différents alliages. La modélisation cinétique via des équivalences temps-température a cependant donné des résultats cohérents, permettant ainsi la prédiction de l’évolution cinétique des propriétés mécaniques des différents alliages pour la gamme de températures étudiée.
- Open Access
- 15 July 2025
- Published by Elsevier in Materials & Design
- Vol. 256
Investigation of the high thermal ageing resistance of the 2219 aluminium alloy
- 15 July 2025
- Published by Elsevier in Materials & Design
- Vol. 256
Open AccessInvestigation of the high thermal ageing resistance of the 2219 aluminium alloy
- Open Access
- 15 June 2025
- Published by Elsevier in Acta Materialia
- Vol. 296
Precipitate evolution and related strengthening during long term ageing of 2618A aluminium alloy
- 15 June 2025
- Published by Elsevier in Acta Materialia
- Vol. 296
Open AccessPrecipitate evolution and related strengthening during long term ageing of 2618A aluminium alloy
- Open Access
- 15 February 2025
- Published by Elsevier in Materialia
- Vol. 39
High-throughput characterisation of the long-term ageing of an A357+1wt%Cu cast aluminium alloy using temperature gradient
- 15 February 2025
- Published by Elsevier in Materialia
- Vol. 39
Open AccessHigh-throughput characterisation of the long-term ageing of an A357+1wt%Cu cast aluminium alloy using temperature gradient
- Open Access
- 4 November 2024
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 57 (6) , 1800-1814
Improving the reliability of small- and wide-angle X-ray scattering measurements of anisotropic precipitates in metallic alloys using sample rotation
Nanometric precipitates in metallic alloys often have highly anisotropic shapes. Given the large grain size and non-random texture typical of these alloys, performing small- and wide-angle X-ray scattering (SAXS/WAXS) measurements on such samples for determining their characteristics (typically size and volume fraction) results in highly anisotropic and irreproducible data. Rotations of flat samples during SAXS/WAXS acquisitions are presented here as a solution to these anisotropy issues. Two aluminium alloys containing anisotropic precipitates are used as examples to validate the approach with a −45°/45° angular range. Clear improvements can be seen on the SAXS I(q) fitting and the consistency between the different SAXS/WAXS measurements. This methodology results in more reliable measurements of the precipitate's characteristics, and thus allows for time- and space-resolved measurements with higher accuracy.
- 4 November 2024
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 57 (6) , 1800-1814
Open AccessImproving the reliability of small- and wide-angle X-ray scattering measurements of anisotropic precipitates in metallic alloys using sample rotation
Nanometric precipitates in metallic alloys often have highly anisotropic shapes. Given the large grain size and non-random texture typical of these alloys, performing small- and wide-angle X-ray scattering (SAXS/WAXS) measurements on such samples for determining their characteristics (typically size and volume fraction) results in highly anisotropic and irreproducible data. Rotations of flat samples during SAXS/WAXS acquisitions are presented here as a solution to these anisotropy issues. Two aluminium alloys containing anisotropic precipitates are used as examples to validate the approach with a −45°/45° angular range. Clear improvements can be seen on the SAXS I(q) fitting and the consistency between the different SAXS/WAXS measurements. This methodology results in more reliable measurements of the precipitate's characteristics, and thus allows for time- and space-resolved measurements with higher accuracy.