Abstract
This talk is dedicated to the long and short-wavelength behaviours of reticulated elastic periodic structures. By means of an asymptotic approach implemented using a multi-cells approach, we derive (i) the equations governing the large scale modulations, (ii) the specific features of the modulation propagation, and (iii) the domain of validity of the description. This approach provides specific information on the physics of large scale modulations that is not directly accessible from the Bloch wave decomposition nor from a multi-scattering approach. The theoretical formulation enables (i) the identification of the frequency range for which evolutions of the rapidly oscillating wave motions arise over long distances, and (ii) simple calculation of the high-frequency wave field based on a two-step procedure that separate the (multi-) cell and the large modulation scales. The asymptotic method is illustrated by studying the academic case of a 1D spring-mass chain. This allows us to establish the correspondence between the modulation phenomena and the classical approaches of homogenization and Floquet–Bloch waves. High-frequency modulations in reticulated ladder beams are then investigated. The dispersion equation for longitudinal and transversal vibrations are first established. Then, from the asymptotic analysis, the equations governing the structure behavior in the standard homogenization regime and in the modulation regimes are derived. In a second part, this talk addresses the determination of buckling loads and mode shapes for a family of ladder beams in the context of plane displacements. The original contributions are: (i) the ability to consider different stiffness ratios between the elements of the structure, (ii) the derivation of effective beam models whose parameters depend on the prestress, (iii) the consideration of both symmetric or asymmetric loadings, and (iv) formulations with mono- or multi-cell periodicity, enabling the identification of both short- and long-wavelength buckling modes. Experiments conducted on 3D-printed ladder beams confirmed the buckling modes and loads predicted by the analytical models. These models are also validated against finite element calculations.

This publication has 2 references indexed in Scilit: