Antoine Rallu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Antoine Rallu has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Denis Branque
5 shared publicationsNicolas Berthoz
4 shared publications- Nicolas Berthoz
CETU
3 shared publications Claude Boutin
2 shared publications- Claude Boutin
Laboratoire de tribologie et de dynamique des systèmes (LTDS), ENTPE, Vaulx-en-Velin, France
2 shared publications Stephane Hans
2 shared publications
Latest Publications
- 3 March 2026
- Published by Cassyni
Asymptotic homogenization for dynamic and buckling analysis of a ladder beam
This talk is dedicated to the long and short-wavelength behaviours of reticulated elastic periodic structures. By means of an asymptotic approach implemented using a multi-cells approach, we derive (i) the equations governing the large scale modulations, (ii) the specific features of the modulation propagation, and (iii) the domain of validity of the description. This approach provides specific information on the physics of large scale modulations that is not directly accessible from the Bloch wave decomposition nor from a multi-scattering approach. The theoretical formulation enables (i) the identification of the frequency range for which evolutions of the rapidly oscillating wave motions arise over long distances, and (ii) simple calculation of the high-frequency wave field based on a two-step procedure that separate the (multi-) cell and the large modulation scales. The asymptotic method is illustrated by studying the academic case of a 1D spring-mass chain. This allows us to establish the correspondence between the modulation phenomena and the classical approaches of homogenization and Floquet–Bloch waves. High-frequency modulations in reticulated ladder beams are then investigated. The dispersion equation for longitudinal and transversal vibrations are first established. Then, from the asymptotic analysis, the equations governing the structure behavior in the standard homogenization regime and in the modulation regimes are derived. In a second part, this talk addresses the determination of buckling loads and mode shapes for a family of ladder beams in the context of plane displacements. The original contributions are: (i) the ability to consider different stiffness ratios between the elements of the structure, (ii) the derivation of effective beam models whose parameters depend on the prestress, (iii) the consideration of both symmetric or asymmetric loadings, and (iv) formulations with mono- or multi-cell periodicity, enabling the identification of both short- and long-wavelength buckling modes. Experiments conducted on 3D-printed ladder beams confirmed the buckling modes and loads predicted by the analytical models. These models are also validated against finite element calculations.
- 3 March 2026
- Published by Cassyni
Asymptotic homogenization for dynamic and buckling analysis of a ladder beam
This talk is dedicated to the long and short-wavelength behaviours of reticulated elastic periodic structures. By means of an asymptotic approach implemented using a multi-cells approach, we derive (i) the equations governing the large scale modulations, (ii) the specific features of the modulation propagation, and (iii) the domain of validity of the description. This approach provides specific information on the physics of large scale modulations that is not directly accessible from the Bloch wave decomposition nor from a multi-scattering approach. The theoretical formulation enables (i) the identification of the frequency range for which evolutions of the rapidly oscillating wave motions arise over long distances, and (ii) simple calculation of the high-frequency wave field based on a two-step procedure that separate the (multi-) cell and the large modulation scales. The asymptotic method is illustrated by studying the academic case of a 1D spring-mass chain. This allows us to establish the correspondence between the modulation phenomena and the classical approaches of homogenization and Floquet–Bloch waves. High-frequency modulations in reticulated ladder beams are then investigated. The dispersion equation for longitudinal and transversal vibrations are first established. Then, from the asymptotic analysis, the equations governing the structure behavior in the standard homogenization regime and in the modulation regimes are derived. In a second part, this talk addresses the determination of buckling loads and mode shapes for a family of ladder beams in the context of plane displacements. The original contributions are: (i) the ability to consider different stiffness ratios between the elements of the structure, (ii) the derivation of effective beam models whose parameters depend on the prestress, (iii) the consideration of both symmetric or asymmetric loadings, and (iv) formulations with mono- or multi-cell periodicity, enabling the identification of both short- and long-wavelength buckling modes. Experiments conducted on 3D-printed ladder beams confirmed the buckling modes and loads predicted by the analytical models. These models are also validated against finite element calculations.
- Open Access
- 9 February 2026
- Published by Elsevier in Tunnelling and Underground Space Technology
- Vol. 172
Steady-state and transient pressure conditions around the EPB-TBM: Numerical modelling based on experimental data
- 9 February 2026
- Published by Elsevier in Tunnelling and Underground Space Technology
- Vol. 172
Open AccessSteady-state and transient pressure conditions around the EPB-TBM: Numerical modelling based on experimental data
- 1 October 2025
- Published by Springer Nature
- p. 702-712
Lyon Metro Site: Cross-Analysis of the Vibratory Impact of the Construction and Operating Phases
- 1 October 2025
- Published by Springer Nature
- p. 702-712
Lyon Metro Site: Cross-Analysis of the Vibratory Impact of the Construction and Operating Phases
- 1 October 2025
- Published by Springer Nature
- p. 384-391
Characterizing the Dynamic Behavior of a High-Rise Building Using Homogenized Beam Models Versus in-Situ Measurements
- 1 October 2025
- Published by Springer Nature
- p. 384-391
Characterizing the Dynamic Behavior of a High-Rise Building Using Homogenized Beam Models Versus in-Situ Measurements
- Open Access
- 13 June 2024
- Published by MDPI AG in Mathematics
- Vol. 12 (12) , 1844
Modal Analysis of a Multi-Supported Beam: Macroscopic Models and Boundary Conditions
This paper deals with the long-wavelength behaviour of a Euler beam periodically supported by co-located rotation and compression springs. An asymptotic homogenization method is applied to derive the several macroscopic models according to the stiffness contrasts between the elastic supports and the beam. Effective models of differential order two or four are obtained, which can be merged into a single unified model whose dispersion relations at long and medium wavelengths fit those derived by Floquet-Bloch. Moreover, the essential role of rotation supports is clearly evidenced. A mixed “discrete/continuous” approach to the boundary conditions is proposed, which allows the boundary conditions actually applied at the local scale to be expressed in terms of Robin-type boundary conditions on macroscopic variables. This approach can be applied to both dominant-order and higher-order models. The modal analysis performed with these boundary conditions and the homogenised models gives results in good agreement with a full finite element calculation, with great economy of numerical resources.
- 13 June 2024
- Published by MDPI AG in Mathematics
- Vol. 12 (12) , 1844
Open AccessModal Analysis of a Multi-Supported Beam: Macroscopic Models and Boundary Conditions
This paper deals with the long-wavelength behaviour of a Euler beam periodically supported by co-located rotation and compression springs. An asymptotic homogenization method is applied to derive the several macroscopic models according to the stiffness contrasts between the elastic supports and the beam. Effective models of differential order two or four are obtained, which can be merged into a single unified model whose dispersion relations at long and medium wavelengths fit those derived by Floquet-Bloch. Moreover, the essential role of rotation supports is clearly evidenced. A mixed “discrete/continuous” approach to the boundary conditions is proposed, which allows the boundary conditions actually applied at the local scale to be expressed in terms of Robin-type boundary conditions on macroscopic variables. This approach can be applied to both dominant-order and higher-order models. The modal analysis performed with these boundary conditions and the homogenised models gives results in good agreement with a full finite element calculation, with great economy of numerical resources.
- Open Access
- 10 February 2023
- Published by Elsevier in Data in Brief
- Vol. 47, 108971
Impact of tunnelling on piles in Parisian subsoil: dataset of in-situ measurements in the ground and on three instrumented piles
- 10 February 2023
- Published by Elsevier in Data in Brief
- Vol. 47, 108971
Open AccessImpact of tunnelling on piles in Parisian subsoil: dataset of in-situ measurements in the ground and on three instrumented piles
- Open Access
- 1 January 2023
- Published by Elsevier in SSRN Electronic Journal
Longitudinal Vibrations Emitted by a Tunnel Boring Machine (Tbm) in Greenfield Conditions. A Numerical Resolution Based on a In-Situcampaign
During the excavation of a shallow tunnel in an urban environment, the tunnel boring machine (TBM) generates vibrations that propagate to the surrounding structures, both at depth and on the surface. An in-situ measurement campaign was carried out on the Lyon metro line B extension site (France), where vibration sensors were placed on the ground surface and inside the TBM.Using the dynamic measurements and the TBM driving data, we propose a model of the vibration source applied to the tunnel face, formulated thanks to the three following assumptions: (i) only the pressure exerted at the face is modelled (considered predominant compared to the torque applied by the cutting wheel on the ground), (ii) the energy of the signals measured inside the TBM is mainly comprised in the range [0,40]Hz, and (iii) the normal stress at the tunnel face is modeled as a small variation (with a parameter $\alpha$) around the static pressure derived from the TBM operating data, the frequency content of which is that of the TBM sensor located inside the TBM.The theoretical problem of greenfield wave propagation in a layered medium with an internal source is then posed. A finite difference model (FLAC3D) is built, allowing the study of the sensitivity of the surface responses as a function of the $\alpha$ parameter of the empirical law, and the choice of [[EQUATION]] is made.- 1 January 2023
- Published by Elsevier in SSRN Electronic Journal
Open AccessLongitudinal Vibrations Emitted by a Tunnel Boring Machine (Tbm) in Greenfield Conditions. A Numerical Resolution Based on a In-Situcampaign
During the excavation of a shallow tunnel in an urban environment, the tunnel boring machine (TBM) generates vibrations that propagate to the surrounding structures, both at depth and on the surface. An in-situ measurement campaign was carried out on the Lyon metro line B extension site (France), where vibration sensors were placed on the ground surface and inside the TBM.Using the dynamic measurements and the TBM driving data, we propose a model of the vibration source applied to the tunnel face, formulated thanks to the three following assumptions: (i) only the pressure exerted at the face is modelled (considered predominant compared to the torque applied by the cutting wheel on the ground), (ii) the energy of the signals measured inside the TBM is mainly comprised in the range [0,40]Hz, and (iii) the normal stress at the tunnel face is modeled as a small variation (with a parameter $\alpha$) around the static pressure derived from the TBM operating data, the frequency content of which is that of the TBM sensor located inside the TBM.The theoretical problem of greenfield wave propagation in a layered medium with an internal source is then posed. A finite difference model (FLAC3D) is built, allowing the study of the sensitivity of the surface responses as a function of the $\alpha$ parameter of the empirical law, and the choice of [[EQUATION]] is made. - 7 October 2022
- Published by Springer Nature
- p. 327-336
In-situ Measurements Frequency Analysis at a Site Scale. Application to Vibrations Induced by Tunnel Boring Machines
- 7 October 2022
- Published by Springer Nature
- p. 327-336
In-situ Measurements Frequency Analysis at a Site Scale. Application to Vibrations Induced by Tunnel Boring Machines
- 7 October 2022
- Published by Springer Nature
- p. 169-177
Theorical Modelling of Longitudinal Wave Propagation Emitted by a Tunnel Boring Machine in a Finite Domain
- 7 October 2022
- Published by Springer Nature
- p. 169-177
Theorical Modelling of Longitudinal Wave Propagation Emitted by a Tunnel Boring Machine in a Finite Domain
- Open Access
- 15 April 2022
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 15 (1) , 130-145
Vibrations induced by tunnel boring machine in urban areas: In situ measurements and methodology of analysis
- 15 April 2022
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
- Vol. 15 (1) , 130-145
Open AccessVibrations induced by tunnel boring machine in urban areas: In situ measurements and methodology of analysis