Martens Hardness of CAD/CAM Resin-Based Composites
Open Access
- 30 July 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (15) , 7698
Abstract
(1) Background: The properties of CAD/CAM resin-based composites differ due to differences in their composition. Instrumented indentation testing can help to analyze these differences with respect to hardness, as well as energy-converting capabilities due to viscoelastic behavior. (2) Methods: Eleven materials were investigated using instrumented indentation testing. Indentation depth (hr), Martens hardness (HM), indentation hardness (HIT), indentation modulus (EIT), the elastic part of indentation work (ηIT), and indentation creep (CIT) were investigated, and statistical analysis was performed using one-way ANOVA, Bonferroni post-hoc test, and Pearson correlation (α = 0.05). (3) Results: All of the investigated parameters revealed differences between the analyzed materials. Besides the differences in hardness-associated parameters (hr, HM, and HIT), instrumented indentation testing demonstrated differences in energy-converting properties. The subsequent one-way ANOVA revealed significant differences (p < 0.001). A significant (p < 0.01, Pearson correlation >0.576) correlation between the materials and HM, HIT, or EIT was identified. (4) Conclusions: Due to the differences found in the energy-converting properties of the investigated materials, certain CAD/CAM resin-based composites could show superior stress-breaking capabilities than others. The consequential reduction in stress build-up may prove to beneficial, especially for implant-retained restorations or patients suffering from parafunctions.Keywords
This publication has 43 references indexed in Scilit:
- The Improved Biological Performance of a Novel Low Elastic Modulus ImplantPLOS ONE, 2013
- Low elastic modulus contributes to the osteointegration of titanium alloy plugJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2012
- Three-dimensional finite element analysis of molars with thin-walled prosthetic crowns made of various materialsDental Materials, 2012
- Time‐dependent visco‐elastic creep and recovery of flowable compositesEuropean Journal of Oral Sciences, 2007
- Hardness measured with traditional Vickers and Martens hardness methodsDental Materials, 2007
- The elastic moduli of enamel and dentineClinical Materials, 1993
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Materials Science Effect of Filler Content and Size on Properties of CompositesJournal of Dental Research, 1985
- Biomechanical considerations in osseointegrated prosthesesThe Journal of Prosthetic Dentistry, 1983
- Masticatory function—a review of the literatureJournal of Oral Rehabilitation, 1975