The Effect of Loading Rate on the Environment-Assisted Cracking Behavior of AA7075-T651 in Aqueous NaCl Solution
Open Access
- 1 July 2021
- journal article
- research article
- Published by MDPI AG in Corrosion and Materials Degradation
- Vol. 2 (3) , 360-375
Abstract
The influence of loading rate on the environment-assisted cracking (EAC) behavior of AA7075-T651 immersed in 0.6 and 1.0 M NaCl solution was assessed at applied potentials ranging from −800 to −1200 mVSCE via a slow-rising stress intensity (K) testing methodology. Measured crack growth rates under rising K loading are compared to those obtained using a fixed K protocol, which revealed that rising K-based testing consistently yields increased crack growth rates relative to static K approaches across all tested conditions. However, relative to other alloy systems, EAC in AA7075-T651 is only modestly loading rate-dependent, as demonstrated by testing conducted at fixed dK/dt ranging from 0.25 to 2.0 MPa√m/h. The implications of the observed results are considered in the context of current EAC testing specifications, with specific focus on the conservatism and efficiency of rising K-based approaches.Keywords
Funding Information
- National Aeronautics and Space Administration (80NSSC21P0569)
This publication has 83 references indexed in Scilit:
- Emerging Issues and Fundamental Processes in Environmental Cracking in Hot WaterCorrosion, 2008
- Improvements in Strength and Stress Corrosion Cracking Properties in Aluminum Alloy 7075 via Low-Temperature Retrogression and Re-Aging Heat TreatmentsCorrosion, 2003
- Influence of Surface Condition on Primary Water Stress Corrosion Cracking Initiation of Alloy 600Corrosion, 2001
- Initiation and Growth of Stress Corrosion Cracks in Type 316L Stainless Steel During Slow Strain Rate TestingCorrosion, 1994
- Limitations of the Slow Strain Rate Test for Stress Corrosion Cracking TestingCorrosion, 1992
- The Postulated Mechanisms for Stress Corrosion Cracking of Aluminum AlloysCorrosion, 1991
- An Incremental Damage Formulation for Stress Corrosion Cracking and Its Application to Crack Growth Interpretation Based on CERT DataCorrosion, 1990
- Slow Strain Rate Testing for Materials Evaluation in High-Pressure H2S EnvironmentsCorrosion, 1988
- Environmentally Assisted Fracture of Aluminum AlloysCorrosion, 1988
- Strain-rate effects on hydrogen embrittlement of 7075 aluminumScripta Metallurgica, 1979