Fluorescent thermal imaging of a quench in insulated and non-insulated REBCO-wound pancake coils following a heater pulse at 77 K
Open Access
- 20 January 2020
- journal article
- research article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 33 (3) , 035006
Abstract
High temperature superconductors (HTS)-wound coils are being developed for use in motors, generators as well as magnet applications. Determining the stability and safe operating margins of such coils still poses challenges. While the recently introduced no-insulation winding method provides a remedy for many problems, it comes with its own limitations. For comparison, we have wound two pancake coils from HTS coated conductors with the insulated and non-insulated winding techniques. Both coils were coated with a fluorescent, temperature-sensitive coating, which allowed monitoring the surface temperatures during operation. The coils were cooled to 77 K via a combination of conduction and gas cooling, and their electrical and thermal behaviour was observed in operation. Here we present the normal transition of both coils caused by an artificially introduced instability due to a surface-mounted, resistive heater element. In the insulated coil, the localized disturbance caused a local transition of the superconductor to the normal conducting state, triggering a thermal runaway. Merely the turns in contact with the artificial disturbance heated up, while the rest of the coil remained in the superconducting state. In the non-insulated coil—although a much longer heater pulse was required—the normal transition started from the weakest point of the coil (around the bobbin) and the whole coil was heating thereafter, with the centre heating more.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (935/1-1)
- National Natural Science Foundation of China (51761135120)
- H2020 Industrial Leadership (721019)
This publication has 14 references indexed in Scilit:
- Quench behavior of a no-insulation coil wound with stainless steel cladding REBCO tape at 4.2 KSuperconductor Science and Technology, 2017
- First performance test of a 25 T cryogen-free superconducting magnetSuperconductor Science and Technology, 2017
- General approach for the determination of the magneto-angular dependence of the critical current of YBCO coated conductorsSuperconductor Science and Technology, 2016
- Over-current quench test and self-protecting behavior of a 7 T/78 mm multi-width no-insulation REBCO magnet at 4.2 KSuperconductor Science and Technology, 2015
- Basic mechanism of self-healing from thermal runaway for uninsulated REBCO pancake coilsPhysica C: Superconductivity and its Applications, 2014
- A 78-mm/7-T Multi-Width No-Insulation ReBCO Magnet: Key Concept and Magnet DesignIEEE Transactions on Applied Superconductivity, 2013
- No-Insulation (NI) HTS Inserts for $>$1 GHz LTS/HTS NMR MagnetsIEEE Transactions on Applied Superconductivity, 2011
- The normal-zone propagation properties of the non-insulated HTS coil in cryocooled operationPhysica C: Superconductivity and its Applications, 2011
- Partial insulation of GdBCO single pancake coils for protection-free HTS power applicationsSuperconductor Science and Technology, 2011
- Quench behavior of conduction-cooled Y Ba2Cu3O7−δcoated conductor pancake coils stabilized with brass or copperSuperconductor Science and Technology, 2010