Implementation of an Embedded Testbed for Indoor SLAM
Authors:
- 1 October 2018
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Abstract
Simultaneous Localization and Mapping (SLAM) is a vital task for autonomous robots moving in unknown environments. It is a rigorous and complex problem where the signals of different modalities originating from sensors as diverse as laser range finders, IR sensors, ultrasonic transducers, odometers and inertial measurement units are used in its different variants. Expensive sensory arrangements and significant computational resources are desired in all the variants of SLAM and multi-processing hardware-software arrangements are essentially needed. Consequently, the overall system becomes quite elaborate and expensive. Another common issue is the odometry error; this error accumulates over time and the robot looses track completely or distorts the map. Generally, a notebook computer is used as the computational resource; as it is frequently placed and removed from the robot, the odometry information is significantly affected. Therefore, it is desired to do the sensor calibration with fixed and complete system hardware. In this work, a testbed development for SLAM is reported. In this design, a low-cost and light-weight FPGA SoC development board is used as the main platform along with a low-cost LIDAR sensor; both fixed on the robot and controlled wirelessly. This fixes the whole hardware configuration and hence the weight of the robot, therefore the calibration results do not alter over time. Moreover, a HW-SW co-design approach is adopted to achieve a highly capable but very compact computational resource. Post-processing of the sensory data with rigorous calibration models has resulted in reasonably precise robot's odometry and environmental perception. The complete system is tested in indoor environment and satisfactory localization and mapping results are achieved.Keywords
This publication has 17 references indexed in Scilit:
- Mobile-robot pose estimation and environment mapping using an extended Kalman filterInternational Journal of Systems Science, 2013
- An FPGA implementation of the SMG-SLAM algorithmMicroprocessors and Microsystems, 2011
- EKF-Based Localization of a Wheeled Mobile Robot in Structured EnvironmentsJournal of Intelligent & Robotic Systems, 2010
- VecSLAM: An Efficient Vector-Based SLAM Algorithm for Indoor EnvironmentsJournal of Intelligent & Robotic Systems, 2009
- Divide and Conquer: EKF SLAM in $O(n)$IEEE Transactions on Robotics, 2008
- A solution to the simultaneous localization and map building (SLAM) problemIEEE Transactions on Robotics and Automation, 2001
- Localization of Autonomous Guided Vehicles1996
- A method for registration of 3-D shapesIEEE Transactions on Pattern Analysis and Machine Intelligence, 1992
- Estimating Uncertain Spatial Relationships in Robotics1990
- Uncertain geometry in roboticsIEEE Journal on Robotics and Automation, 1988