Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Khalid Munawar has a total of 83 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bus Voltage Stabilization of a Sustainable Photovoltaic-Fed DC Microgrid with Hybrid Energy Storage Systems

    by Rudi Uswarman, Khalid Munawar, Makbul A. M. Ramli, Ibrahim M. Mehedi

    Renewable energy sources play a great role in the sustainability of natural resources and a healthy environment. Among these, solar photovoltaic (PV) systems are becoming more economically viable. However, as the utility of solar energy conversion systems is limited by the availability of sunlight, they need to be integrated with electrical energy storage systems to be more sustainable. This paper aims to improve the control performance of a hybrid energy storage system (HESS) with PV power generation as the primary power source. HESSs stabilize DC microgrid systems by compensating for demand generation mismatches. Batteries and supercapacitors are chosen as energy storage elements; batteries have a high energy density and are capable of supplying and absorbing energy over a long duration, while supercapacitors can store and deliver energy very quickly. To enhance the stability of the system, each storage element is connected to the DC bus using a bidirectional Ćuk converter, which offers high efficiency, a continuous current, and minimal switching losses. This study proposes a proportional–integral (PI) controller combined with the fast nonsingular integral terminal sliding mode control (FNITSMC) for HESSs to adjust the power balance in a DC microgrid. FNITSMC has the advantage of enhancing the system states to reach the equilibrium point of a long sliding surface with a fast convergence rate. The reference current for FNITSMC is obtained using a PI controller combined with a low-pass filter (LPF), which eliminates the peaking current spikes on the battery and diverts them towards the supercapacitor. The effectiveness of the proposed control scheme is validated through the real-time hardware-in-the-loop (HIL) simulations on Typhoon™ HIL-402 with added uncertainties, including load variations at various temperatures and irradiances.


  • Open Access

    Sum Capacity-Based Modeling and Secrecy Analysis of MISO-NOMA Cooperative IoT Framework

    by Naeem Uz Zaman, Khalid Munawar, Muhammad Moinuddin, Ahmad Kamal Hassan, Ubaid M. Al-Saggaf

    Non-orthogonal multiple access (NOMA) has emerged as an effective technology, aiding in latency reduction, improving security and reliability, and enhancing the spectral efficiency and capacity in Internet of Things (IoT)-enabled communication systems. In this work, an implementation of co-operative secure multiple-input single-output NOMA IoT framework is proposed and examined in a two-fold manner. First, under the consideration of standalone links, a user selection criteria which relies on the characterization of sum ergodic capacity (SEC) is investigated in the presence of an eavesdropper (ED) and beamforming constraints. Next, using the optimized beamformers, a user selection criteria which relies on the outage probability analysis is performed under cooperative relaying considerations. We demonstrate that our optimization approach achieves reduced capacity and coverage for the ED while maximizing the overall SEC and coverage of the network under multiple network configurations. The proposed optimization solution demonstrates superior performance compared to the benchmarked schemes. Derived closed-form analytical expressions are validated through simulation means.


  • Open Access

    Enhancing Conventional Geometry-Based Visual Odometry Pipeline Through Integration of Deep Descriptors

    by Muhammad Bilal, Muhammad Shehzad Hanif, Khalid Munawar, Ubaid M. Al-Saggaf

    Geometry-based Visual Odometry (VO) techniques are renowned in the fields of computer vision and robotics. They use methods from multi-view geometry to estimate camera motion from visual data obtained from one or more cameras. Tracking the camera motion precisely between different views is dependent on the correct estimation of correspondences between salient image points of the views. In practice, geometry-based methods are found to be quite effective but do not perform well in challenging cases caused by abrupt motion, occlusions, textureless and low-light scenes, etc. due to tracking failures. On the contrary, end-to-end learning from visual data using deep neural networks is an emerging area of research and deals with challenging cases successfully. Despite being computationally expensive, these methods do not outperform their counterparts in conditions favorable to geometry-based methods. Considering these facts in this work, our goal is to integrate deep descriptors to improve the correspondence between image points for tracking in a traditional geometry-based VO pipeline. We propose a simple stereo VO pipeline inspired by popular techniques found in the literature. Two conventional and four deep descriptors have been used in our experiments conducted on various image sequences of the challenging KITTI benchmark dataset. We have determined empirically that deep descriptors can effectively minimize drift in the VO estimates and produce better camera trajectories. The experimental results on the KITTI dataset demonstrate that our VO method performs at par with the state-of-the-art works reported in the literature.


  • Open Access

    Maximum Power Point Tracking in Photovoltaic Systems Based on Global Sliding Mode Control with Adaptive Gain Scheduling

    by Rudi Uswarman, Khalid Munawar, Makbul A. M. Ramli, Houssem R. E. H. Bouchekara, Alamgir Hossain

    Maximum power point tracking (MPPT) controllers have already achieved remarkable efficiencies. For smaller photovoltaic (PV) systems, any improvement will not really be worth mentioning as an achievement. However, for large solar farms, even a fractional improvement will eventually create a significant impact. This paper presents an MPPT control scheme using global sliding mode control (GSMC) with adaptive gain scheduling. In the two-loop controller, the first loop determines the maximum power point (MPP) reference using online calculations, while the GSMC with adaptive gain scheduling in the second loop adjusts the boost converter’s pulse width modulation (PWM) to force the PV system to operate at the MPP with improved performance. The adaptive gain scheduling regulates the gain of the switching control to maintain the controller performance over a wide range of operating conditions, while GSMC guarantees the system robustness throughout the control process by eliminating the reaching phase and improving MPPT performance. The overall PV system also has Lyapunov stability. Furthermore, the robustness analysis of the proposed controller is also performed under load variations and parametric uncertainties at various temperatures and irradiances. In the simulations, the proposed MPPT control scheme has shown faster response than other controllers, reaching the set point with rise time 0.03 s as compared to 0.07 s and 0.13 s for quasi sliding mode control (QSMC) and conventional sliding mode control (CSMC), respectively. The proposed controller showed an overshoot of 1.2 V around a steady state value of 21.9 V as compared to 1.51 V and 1.45 V, respectively, for QSMC and CSMC for a certain parametric variation. Furthermore, the proposed controller and the QSMC-based scheme showed a steady-state error of 0.3 V, while the CSMC-based approach has a more significant error. In conclusion, the proposed MPPT control scheme has a faster response and low tracking error with minimal oscillations.


  • Open Access

    Fractional data-driven control for a rotary flexible joint system

    by Maher H AlSereihy, Ibrahim M Mehedi, Ubaid M Al-Saggaf, Khalid Munawar, Rachid Mansouri, Maamar Bettayeb

    As one of the most promising topics in complex control processes, data-driven techniques have been widely used in numerous industrial sectors and have developed over the past two decades. In addition, the fractional-order controller has become more attractive in applied studies. In this article, a fractional integral control is implemented for a rotary flexible joint system. Moreover, an adjusted virtual reference feedback tuning (VRFT) technique is used to tune the fractional-order integrator. In this method, fractional integral control is designed based on state feedback control. Then, VRFT is adjusted and applied to the fractional integral controller. The effectiveness of the proposed adjusted VRFT method is discussed and presented through simulation and experimental results. The tracking performance of the rotary arm and the minimization of the vibration tip is evaluated based on the proposed method. In this article, the comparison of our proposed VRFT fractional scheme is made with the classical state feedback as well as a recently developed state feedback-based fractional order integral (SF-FOI) controller. The current investigations determine the performance improvement of our proposed scheme of comparable structure to the recent SF-FOI, with the introduction of the VRFT to the SF-FOI scheme.


  • Robustness Improvement of the Fractional-Order LADRC Scheme for Integer High-Order System

    by Ubaid M. Al-Saggaf, Rachid Mansouri, Maamar Bettayeb, Ibrahim M. Mehedi, Khalid Munawar

    This article deals with a novel fractional-order active disturbance rejection control (FADRC) scheme to handle a general integer-order system. The proposed control structure enhances the robustness and performance of the classical active disturbance rejection control, especially for the open-loop gain variation. Based on the Bode's ideal transfer function, an analytical design of a state-feedback control is proposed. The integer-order model of the system to be controlled is first transformed to a noninteger-order one, where the introduced fractional order is a design parameter, which imposes the overshoot of the closed-loop step response. In addition, because the model of the system is transformed to a cascade of integer- and fractional-order integrator (the model is noncommensurate), a commensurate fractional-order extended state observer is proposed to estimate the generalized disturbance. To improve the robustness of the proposed FADRC scheme, an analytical design method of a noncommensurate state-feedback control is proposed. The proposed design method is based on the Bode's ideal transfer function cascaded with an integer-order filter. The proposed FADRC scheme is applied for a pendulum-cart test bed, and the effectiveness and robustness of the proposed control are examined by experiments.


  • Implementation of an Embedded Testbed for Indoor SLAM

    by Muhammad Shehzad Hanif, Muhammad Bilal, Khalid Munawar, Abdullah Saeed Balamash

    Simultaneous Localization and Mapping (SLAM) is a vital task for autonomous robots moving in unknown environments. It is a rigorous and complex problem where the signals of different modalities originating from sensors as diverse as laser range finders, IR sensors, ultrasonic transducers, odometers and inertial measurement units are used in its different variants. Expensive sensory arrangements and significant computational resources are desired in all the variants of SLAM and multi-processing hardware-software arrangements are essentially needed. Consequently, the overall system becomes quite elaborate and expensive. Another common issue is the odometry error; this error accumulates over time and the robot looses track completely or distorts the map. Generally, a notebook computer is used as the computational resource; as it is frequently placed and removed from the robot, the odometry information is significantly affected. Therefore, it is desired to do the sensor calibration with fixed and complete system hardware. In this work, a testbed development for SLAM is reported. In this design, a low-cost and light-weight FPGA SoC development board is used as the main platform along with a low-cost LIDAR sensor; both fixed on the robot and controlled wirelessly. This fixes the whole hardware configuration and hence the weight of the robot, therefore the calibration results do not alter over time. Moreover, a HW-SW co-design approach is adopted to achieve a highly capable but very compact computational resource. Post-processing of the sensory data with rigorous calibration models has resulted in reasonably precise robot's odometry and environmental perception. The complete system is tested in indoor environment and satisfactory localization and mapping results are achieved.


  • Distributed Average Tracking in Multi-Agent Coordination: Extensions and Experiments

    by Muhammad Saim, Sheida Ghapani, Wei Ren, Khalid Munawar, Ubaid M. Al-Saggaf

    This paper addresses the distributed average tracking (DAT) problem for a group of agents to track the average of multiple time-varying reference signals, each of which is available to only one agent, under local interaction with neighbors and an undirected graph. We consider three cases: 1) DAT for single-integrator dynamics with a chain of integrators in algorithm design; 2) DAT with swarm behavior for single-integrator dynamics; and 3) DAT with swarm behavior for double-integrator dynamics. First, a continuous distributed algorithm with a chain of two integrators is proposed for single-integrator dynamics, where each agent needs its own and its neighbors' filter outputs obtained through communication besides its absolute position, local relative positions, reference signal, and reference velocity. The introduced algorithm can deal with a wide class of reference signals with steady deviations among reference velocities. Then, two swarm-based DAT algorithms for, respectively, single- and double-integrator dynamics are presented. In the first swarm-based algorithm for single-integrator dynamics, each agent needs to measure the relative positions between itself and its neighbors, while in the second swarm-based algorithm for double-integrator dynamics, relative velocity information is required too. In both cases, the information can be obtained through local sensing. If correct initialization constraints can be achieved, the center of the agents will track the average of the reference signals and the agents will maintain connectivity and avoid interagent collision. Numerical simulations are also presented to illustrate the theoretical results. Finally, the algorithms presented in this paper are experimentally implemented and validated on a multirobot platform.