Open-Source Fully-Synthesizable ADPLL for a Bluetooth Low-Energy Transmitter in 12nm FinFET Technology
- 19 June 2022
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 155-158
Abstract
In this work, we present an open-source fully-synthesizable fractional-N ADPLL designed for a Bluetooth Low-Energy (BLE) transmitter (TX). A highly automated design flow is used to lower the barrier for new developers and to reduce porting cost. In the PLL, a novel two-step TDC (TSTDC) is proposed, which is amenable to P&R, and uses an embedded TDC (EMBTDC) and vernier delay-line TDC (DLTDC) as coarse and fine TDCs, respectively. This combination reduces the required DLTDC input time range by 5x and is used to measure and compensate the P&R induced non-linearity of the EMBTDC. The PLL is fabricated in 12-nm FinFET and demonstrated in a BLE-TX. BLE transmissions satisfy the standard requirements thanks to the reduced fractional spurs by abovementioned techniques. In a standalone PLL mode, the TSTDC reduced fractional spurs by 6.8 dB compared to an EMBTDC alone, and the proposed LUT-based calibration further reduced spurs by 7.5 dB in near-integer operation. The PLL supports frequency range of 1.8-2.7GHz and consumes 3.91mW at 2.4006 GHz, with a 40MHz reference, occupying area of 0.063mm 2 .Keywords
This publication has 5 references indexed in Scilit:
- The missing pieces of open design enablement2020
- 25.5 A Self-Calibrated 1.2-to-3.8GHz 0.0052mm2 Synthesized Fractional-N MDLL Using a 2b Time-Period Comparator in 22nm FinFET CMOS2020
- A 0.5-V 1.6-mW 2.4-GHz Fractional-N All-Digital PLL for Bluetooth LE With PVT-Insensitive TDC Using Switched-Capacitor Doubler in 28-nm CMOSIEEE Journal of Solid-State Circuits, 2018
- A 2 GHz Synthesized Fractional-N ADPLL With Dual-Referenced Interpolating TDCIEEE Journal of Solid-State Circuits, 2015
- A calibration-free 800MHz fractional-N digital PLL with embedded TDC2010