Correlation of electrical conductivity, dielectric properties, microwave absorption, and matrix properties of composites filled with graphene nanoplatelets and carbon nanotubes
- 28 July 2015
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 118 (4) , 044105
Abstract
The DC electrical conductivity, percolation threshold, and dielectric properties of Graphene Nanoplatelets (GNPs) filled epoxy composites are studied and correlated with microwave absorption. The properties of GNPs filled composites are also compared with multiwalled carbon nanotubes (MWCNTs) composites, and GNPs are observed to have superior conductivity than MWCNTs. In all batches, the nanofillers have 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, and 3.5 wt. %. All composites irrespective of the type of nanofiller and viscosity of the matrix have shown electrical percolation threshold at 3.0 wt. %. The dielectric properties, i.e., complex permittivity, tan loss, and AC conductivity, are studied in 100 Hz–5.5 MHz. The DC and AC electrical conductivities (at and below the percolation) measured in 100 Hz–5.5 MHz are correlated to the GNPs and MWCNTs epoxy composites in the microwave frequency range (11–17 GHz). The maximum return loss of −12 dB and −6 dB was determined for MWCNTs and GNPs, respectively. The effects of nanofiller shape and the viscosity of the matrix on the dispersion and interparticle spacing of the conductive fillers within the polymer matrix have been discussed based on the results of conductivity, dielectric, and absorption properties.Keywords
This publication has 46 references indexed in Scilit:
- Transport properties of graphite/epoxy composites: Thermal, permeability and dielectric characterizationPolymer Testing, 2013
- Thermal conductivity of exfoliated graphite nanoplatelet paperCarbon, 2011
- Electrical/dielectric properties and conduction mechanism in melt processed polyamide/multi-walled carbon nanotubes compositesPolymer, 2009
- High Dielectric Permittivity and Low Percolation Threshold in Nanocomposites Based on Poly(vinylidene fluoride) and Exfoliated Graphite NanoplatesAdvanced Materials, 2009
- Enhanced Thermal Conductivity in a Hybrid Graphite Nanoplatelet – Carbon Nanotube Filler for Epoxy CompositesAdvanced Materials, 2008
- Effects of surface modification of carbon nanotubes on the microstructure and electrical properties of carbon nanotubes/rubber nanocompositesChemical Physics Letters, 2008
- Giant Dielectric Permittivities in Functionalized Carbon‐Nanotube/ Electroactive‐Polymer NanocompositesAdvanced Materials, 2007
- Numerical predictions for radar absorbing silicon carbide foams using a finite integration technique with a perfect boundary approximationSmart Materials and Structures, 2006
- Mechanical and thermal properties of graphite platelet/epoxy compositesPolymer, 2004
- Coagulation method for preparing single‐walled carbon nanotube/poly(methyl methacrylate) composites and their modulus, electrical conductivity, and thermal stabilityJournal of Polymer Science Part B: Polymer Physics, 2003