SRSobia Allah Rakha

Sobia Allah Rakha

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Sobia Allah Rakha has a total of 74 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Top Cited Papers
    Open Access

    State-Of-The-Art of Sandwich Composite Structures: Manufacturing—to—High Performance Applications

    by Ayesha Kausar, Ishaq Ahmad, Sobia A. Rakha, M. H. Eisa, Abdoulaye Diallo

    This cutting-edge review highlights the fundamentals, design, and manufacturing strategies used for sandwich composites. Sandwich composite structures have the advantages of light weight, high strength, impact resistance, stability, and other superior features for advanced applications. In this regard, different core materials have been used in the sandwich composite structures, such as cellular polymer foam, metallic foam, honeycomb, balsa, tubular, and other core geometries. Among these, honeycomb sandwich composite materials have been effectively applied in space engineering, marine engineering, and construction applications. The foremost manufacturing techniques used for sandwiched composite structures include hand lay-up, press method, prepreg method, vacuum bagging/autoclave, vacuum assisted resin infusion, resin transfer molding, compression molding, pultrusion, three-dimensional (3D) printing, four-dimensional (4D) printing, etc. In advanced composite manufacturing, autoclave processes have been the method of choice for the aerospace industry due to less delamination between plies and easy control of thickness dimensions. Moreover, machining processes used for sandwich composites are discussed in this article. In addition to aerospace, the high-performance significance of sandwiched composite structures is covered mainly in relation to automobile engineering and energy absorption applications. The structure-, fabrication-, and application-related challenges and probable future research directions are also discussed in this article.


  • Top Cited Papers
    Open Access

    Views on Radiation Shielding Efficiency of Polymeric Composites/Nanocomposites and Multi-Layered Materials: Current State and Advancements

    by Kashif Shahzad, Ayesha Kausar, Saima Manzoor, Sobia A. Rakha, Ambreen Uzair, Muhammad Sajid, Afsheen Arif, Abdul Faheem Khan, Abdoulaye Diallo, Ishaq Ahmad

    This article highlights advancements in polymeric composite/nanocomposites processes and applications for improved radiation shielding and high-rate attenuation for the spacecraft. Energetic particles, mostly electrons and protons, can annihilate or cause space craft hardware failures. The standard practice in space electronics is the utilization of aluminum as radiation safeguard and structural enclosure. In space, the materials must be lightweight and capable of withstanding extreme temperature/mechanical loads under harsh environments, so the research has focused on advanced multi-functional materials. In this regard, low-Z materials have been found effective in shielding particle radiation, but their structural properties were not sufficient for the desired space applications. As a solution, polymeric composites or nanocomposites have been produced having enhanced material properties and enough radiation shielding (gamma, cosmic, X-rays, protons, neutrons, etc.) properties along with reduced weight. Advantageously, the polymeric composites or nanocomposites can be layered to form multi-layered shields. Hence, polymer composites/nanocomposites offer promising alternatives to developing materials for efficiently attenuating photon or particle radiation. The latest technology developments for micro/nano reinforced polymer composites/nanocomposites have also been surveyed here for the radiation shielding of space crafts and aerospace structures. Moreover, the motive behind this state-of-the-art overview is to put forward recommendations for high performance design/applications of reinforced nanocomposites towards future radiation shielding technology in the spacecraft.


  • Open Access

    Modified electrical and microwave absorption properties of silver nanowires grown on graphene nanoplatelets

    by Munazza Gul, Mohsan Jelani, Najam Ul Hassan, Muhammad Naeem, Sobia Allah Rakha, Aqeel Ahsan Khurram, Naveed Ali, Arshad Munir


  • Mechanical performance of epoxy matrix hybrid nanocomposites containing carbon nanotubes and nanodiamonds

    by Tayyab Subhani, Munaisra Latif, Iftikhar Ahmad, Sobia A. Rakha, Naveed Ali, Aqeel A. Khurram


  • Correlation of electrical conductivity, dielectric properties, microwave absorption, and matrix properties of composites filled with graphene nanoplatelets and carbon nanotubes

    by A. A. Khurram, Sobia A. Rakha, Peiheng Zhou, M. Shafi, Arshad Munir

    The DC electrical conductivity, percolation threshold, and dielectric properties of Graphene Nanoplatelets (GNPs) filled epoxy composites are studied and correlated with microwave absorption. The properties of GNPs filled composites are also compared with multiwalled carbon nanotubes (MWCNTs) composites, and GNPs are observed to have superior conductivity than MWCNTs. In all batches, the nanofillers have 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, and 3.5 wt. %. All composites irrespective of the type of nanofiller and viscosity of the matrix have shown electrical percolation threshold at 3.0 wt. %. The dielectric properties, i.e., complex permittivity, tan loss, and AC conductivity, are studied in 100 Hz–5.5 MHz. The DC and AC electrical conductivities (at and below the percolation) measured in 100 Hz–5.5 MHz are correlated to the GNPs and MWCNTs epoxy composites in the microwave frequency range (11–17 GHz). The maximum return loss of −12 dB and −6 dB was determined for MWCNTs and GNPs, respectively. The effects of nanofiller shape and the viscosity of the matrix on the dispersion and interparticle spacing of the conductive fillers within the polymer matrix have been discussed based on the results of conductivity, dielectric, and absorption properties.


  • Preparation of Microwave Absorbing E‐Glass/Epoxy Nanocomposites with Low Content of Binary Carbon Nanofillers

    by Sobia A. Rakha, A. A. Khurram, Naveed Ali, Arshad Munir, Ahsan Iqbal, T. Subhani, I. H. Gul

    The nanocomposite microwave absorbers are prepared from laminates of E glass/epoxy matrix with the incorporation of multiwalled carbon nanotubes (MWCNTs) and detonation nanodiamond (DND). Nanodiamond particles are used to effectively and uniformly disperse the carbon nanotubes in the polymer matrix, leading to a very homogenous mixture. The results showed that microwave absorption of nanocomposites increases with the increase in MWCNTs concentration in 11–17 GHz frequency range. The maximum loss of –28 dB was obtained at 14 GHz. The bandwidth corresponding to the reflection loss of −10 dB is 4.5 GHz. The mechanical properties are also improved after incorporating MWCNTs and DND in the composite. The tensile strength has been increased by ∼113% after the addition of 1.0 wt% MWCNTs and 0.1 wt% DND. The morphological investigation demonstrated that coating of MWCNTs on the surface of the woven glass fibers in the presence of DND resulted in uniform dispersion of nanotubes throughout the matrix with the formation of connected networks that helps in electrical conduction and load transfer between the nanofillers and the matrix. The role of MWCNTs and DND particles in enhancing the electromagnetic absorption and mechanical properties of the nanocomposite laminates is explained.


  • Microwave Absorbing Properties of Lightweight Nanocomposite/Honeycomb Sandwich Structures

    by A. A. Khurram, Sobia A. Rakha, Naveed Ali, M. T. Asim, Zhang Guorui, Arshad Munir

    Thin glass-fiber/epoxy-composite sheets filled with multiwalled carbon nanotubes (MWCNTs) are manufactured to make lightweight honeycomb sandwich microwave absorbers. A multilayered sandwich structure of thin nanocomposite sheets and honeycomb spacers have been also proposed and developed to work in a wide frequency range. The nanocomposite sheets are prepared from 0.5, 1.0, 1.5, 2.0, and 2.5 wt. % of MWCNTs. A commercially available simulation software computer simulation technology (CST) microwave studio was used for the designing and development of radar absorbing structure (RAS) composed of MWCNTs/glass-fiber/epoxy-composite sheets and honeycomb cores. The measurements of return loss (RL) from sandwich structures with 5 mm and 20 mm honeycomb cores in the Ku band (11–17 GHz) show that maximum RL is achieved at 11 GHz and 16 GHz, respectively. The stacking of three nanocomposite sheets and three 5 mm-thick honeycomb spacers produced a wide band microwave absorber with −10 dB RL over 9 GHz bandwidth.


  • Microwave Properties of Nanocomposites: Effect of Manufacturing Methods and Nanofiller Structure

    by A. A. Khurram, Sobia A. Rakha, Naveed Ali, I. H. Gul, Arshad Munir

    Nanocomposite materials filled with multiwall carbon nanotubes (MWCNTs) having three types of structures, i.e., longer (200 μm), shorter (20–50 μm), and aminated (20–50 μm), are manufactured for microwave absorption (MA) in 11–17 GHz frequency range. Microstructure, dielectric permittivity, direct current (DC) electrical conductivity, and MA properties of the MWCNTs–epoxy nanocomposite were investigated. A correlation has been developed between the structure (aspect ratio and surface functionality) of MWCNTs, electrical conductivity of the composite, and MA (return loss (RL)). E-glass/epoxy composite filled with longer carbon nanotubes (CNTs) has shown higher RL as compared to that of other two nanocomposites. The measurements have shown that the magnitude of RL of microwaves depends strongly on the structure of MWCNTs used in the composite. Furthermore, the effect of synthesis route followed for the manufacturing of nanocomposite on its electrical conductivity and microwave absorbing properties is also investigated; three different approaches were followed to manufacture CNT/epoxy nanocomposites from longer CNTs (200 μm).

  • Comparison of Mechanical Properties of Acid and UV Ozone Treated Nanodiamond Epoxy Nanocomposites

    by Sobia A. Rakha, Naveed Ali, Yasir A. Haleem, Fakhre Alam, Aqeel A. Khurram, Arshad Munir


  • Effect of low‐content carbon nanotubes on the dielectric and microwave absorption properties of graphite/polymer nanocomposites

    by A. A. Khurram, Sobia A. Rakha, Naveed Ali, Peiheng Zhou, Arshad Munir

    Honeycomb cores (HCs) coated with graphite and multiwalled carbon nanotubes (MWCNTs) filled in a thermoplastic resin are proposed as microwave absorbers. The MWCNT contents varied from 0.2 to 0.6 wt % in a graphite‐filled (15 wt %) thermoplastic resin. The HCs were coated with three different types of coating materials for the sake of comparison: graphite, MWCNTs, and graphite plus MWCNTs. The dielectric properties [the real and imaginary parts of complex permittivity (ε′ and ε″, respectively)] and reflection loss (RL) of all of the coated HCs were measured and compared. We observed that the permittivities and RL increased significantly with increased weight percentage of the MWCNTs in the graphite‐filled thermoplastic resin. The RL measurements showed a maximum loss of −20 dB around 7 GHz and a bandwidth of 2.7 GHz at −10 dB in the HCs coated with the 0.4 wt % MWCNT plus graphite. There was also a shift in the RL peak position from the x band to the c band after the increase of MWCNT content. We also observed from the measurements that a combination of graphite and MWCNTs resulted in a broadband microwave absorber; a bandwidth of 13 GHz was observed for 80% RL when the MWCNT content increased to 0.6 wt % in the graphite‐incorporated resin. The possible mechanism that increased RL with the incorporation of MWCNTs in the graphite‐mixed thermoplastic resin is discussed. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2014,131, 40891.