Microstructure and Mechanical Properties of Thick Plate Friction Stir Welds for 6082-T6 Aluminum Alloy
Open Access
- 16 October 2018
- journal article
- research article
- Published by Walter de Gruyter GmbH in High Temperature Materials and Processes
- Vol. 38 (2019) , 525-532
Abstract
6082-T6 aluminum alloy plate with thickness of 42mm was butt welded by friction stir welding (FSW) from two sides. The microstructures of the joints exhibited different grain sizes because of unequal frictional heating and plastic flow during FSW process. The transition from the heat affected zone (HAZ) to the nugget zone (NZ) in thermos-mechanical affected zone of advancing side (AS-TMAZ) was more sudden than thermos-mechanical affected zone of retreating side (RS-TMAZ). Kissing bond (KB) defect throughout the entire FSW joint was displayed both at the grain boundary and in the interior of the grain with semi-continuous bands. KB had no direct effect on tensile properties. Vickers hardness of the FSW joint was lower than the BM because its high heat input, dissolved and coarsened precipitates and little to the grain size after FSW. Hardness distribution of double-sided welding joint showed X-shaped area softening characteristics, that is to say the lowest hardness was the junction of two welding joint of NZ and the junction of TMAZ and HAZ. The tensile fracture position occurred in the lowest hardness region of the FSW joint, and it did not occur in the KB defect position.Keywords
This publication has 13 references indexed in Scilit:
- Effect of welding parameters on the microstructure and mechanical properties of the friction stir welded joints of a Mg-12Li-1Al alloyJournal of Alloys and Compounds, 2017
- Microstructure and mechanical properties in friction stir welded 5A06 aluminum alloy thick plateMaterials & Design, 2017
- Effects of initial oxide on microstructural and mechanical properties of friction stir welded AA2219 alloyMaterials & Design, 2015
- Friction stir welding: Process, automation, and controlJournal of Manufacturing Processes, 2014
- A Coupled Thermal/Material Flow Model of Friction Stir Welding Applied to Sc-Modified Aluminum AlloysMetallurgical and Materials Transactions A, 2012
- Effect of kissing bond on fatigue behavior of friction stir welds on Al 5083 alloyJournal of Materials Science, 2006
- First-principles study of crystal structure and stability of Al?Mg?Si?(Cu) precipitatesActa Materialia, 2004
- FIB-assisted TEM study of an oxide array in the root of a friction stir welded aluminium alloyScripta Materialia, 2004
- Mechanical response of friction stir welded AA2024: experiment and modelingMaterials Science and Engineering: A, 2002
- Properties of friction-stir-welded 7075 T651 aluminumMetallurgical and Materials Transactions A, 1998