Orthogonal Pin Construct Versus Parallel Uniplanar Pin Constructs for Pelvic External Fixation: A Biomechanical Assessment of Stiffness and Strength
Authors:
- Michael T ArchdeaconMAMichael T Archdeacon
- Sameh ArebiSASameh Arebi
- T Toan LeTLT Toan Le
- Rene WirthRWRene Wirth
- Roland KebelRKRoland Kebel
- Mayur ThakoreMTMayur Thakore
- 2 February 2009
- journal article
- research article
- Published by Wolters Kluwer Health in Journal of Orthopaedic Trauma
- Vol. 23 (2) , 100-105
Abstract
The purpose of this study is to compare the structural stiffness of an orthogonal pelvic external fixator pin construct with 2 different parallel external fixator pin constructs in a simulated bone model. An orthogonal pelvic external fixator pin construct would be significantly more stiff than a parallel pin construct when loaded in-plane under similar conditions. Thirty synthetic pelvic bone models were configured with orthogonal pins (group 1), parallel iliac crest pins (group 2), or parallel supra-acetabular pins (group 3). Specimens were loaded either in-plane (flexion/extension moment) or out-of-plane (internal/external rotation moment) to assess construct stiffness. Orthopaedic industry mechanical testing laboratory (Stryker Orthopedics, Mahwah, NJ). Single load cycle to failure with load application modified to assess stiffness both in-plane and out-of-plane with the pin constructs. Pelvic external fixation pin construct stiffness. Stiffness for in-plane loading was 150.2 +/- 51.2 N/mm for the orthogonal pin construct, 105.0 +/- 46.9 N/mm for the iliac crest pin construct, and 104.7 +/- 20.7 N/mm for the supra-acetabular pin construct. Pairwise comparisons demonstrated that the difference was significant (P < 0.05) between groups 1 and 2 and groups 1 and 3 but not between groups 2 and 3. Stiffness for out-of-plane loading was 49.6 +/- 3.4 N/mm for the orthogonal pin construct, 53.9 +/- 3.5 N/mm for the iliac crest pin construct, and 100.6 +/- 4.3 N/mm for the supra-acetabular pin construct, with significant differences (P < 0.05) between groups 1 and 3 and groups 2 and 3 but not between groups 1 and 2. An orthogonal pelvic external fixator pin construct produced a significantly stiffer construct for in-plane loading (flexion/extension moment) compared with either parallel pin construct; however, a parallel supra-acetabular pin construct was stiffer for out-of-plane loading.Keywords
This publication has 21 references indexed in Scilit:
- Stabilization of Unstable Pelvic Fractures With Supraacetabular Compression External FixationJournal of Orthopaedic Trauma, 2007
- External fixation of the pelvic ring: An experimental study on the role of pin diameter, pin position, and parasymphyseal fixator pinsActa Orthopaedica, 2007
- The Biomechanics of Human Femurs in Axial and Torsional Loading: Comparison of Finite Element Analysis, Human Cadaveric Femurs, and Synthetic FemursJournal of Biomechanical Engineering, 2006
- Placement of Half-Pins for Supra-acetabular External Fixation: An Anatomic StudyClinical Orthopaedics and Related Research, 2003
- External fixators for pelvic fractures: Comparison of the stiffness of current systemsActa Orthopaedica, 2003
- Improvement of External Fixator Performance in Type C Pelvic Ring Injuries by Plating of the Pubic Symphysis: An Experimental Study on 12 External Fixators2002
- Simple Anterior Pelvic External FixationThe Journal of Trauma: Injury, Infection, and Critical Care, 2000
- Distraction External Fixation in Lateral Compression Pelvic FracturesJournal of Orthopaedic Trauma, 2000
- Mechanical validation of whole bone composite femur modelsJournal of Biomechanics, 1996
- A Study of External Skeletal Fixation Systems for Unstable Pelvic Fractures1984