Use of a mixture of coal and oil as an additive for selective reduction of lateritic ore by the Caron process
Authors:
Open Access
- 1 January 2024
- journal article
- research article
- Published by National Library of Serbia in Hemijska industrija
- Vol. 78 (1) , 17-27
Abstract
Lateritic ores constitute the main source of raw material for extraction of Ni and Co by the Caron process. Consumption of oil in the reduction furnace is one of the key indicators if the metallurgical process is economical. To date it has not been possible to replace the additive fuel oil that is used at commercial scales, therefore, the aim of this study was to partially replace the oil with bituminous coal on a pilot scale by using a mixture of 2 % coal and 1.25 % oil as the reducer additive. Phases of the reduced/leached ores were analyzed by powder X-ray diffraction, while the metallic state of the ore was determined by leaching the reacted samples with a bromine-ethanol solution followed by the atomic absorption spectrometry analysis. Extractions of Ni and Co were confirmed by leaching the reduced ore with ammoniacal-ammonium carbonate solutions. It was observed that the mixture used as a reducer additive can replace the fuel oil since it allows the adequate transformation of the main mineralogical phases of the laterite ore during the reduction process and the average extraction yields of Ni and Co for ~3 and ~8 %, respectively. Although the effect of bituminous coal particle size in the process was not analyzed, the reducing mixture ensured that the Caron process was more efficient.Keywords
This publication has 30 references indexed in Scilit:
- Assessing the Influence of NaCl on the Reduction of a Siliceous Laterite Nickel Ore Under Caron Process ConditionsMetallurgical and Materials Transactions B, 2019
- Thermodynamic modelling of the reduction of a saprolitic laterite ore by methaneMinerals Engineering, 2018
- A Thermodynamic Study of the Reduction of a Limonitic Laterite Ore by MethaneHigh Temperature Materials and Processes, 2018
- Reactive transport model of the formation of oxide-type Ni-laterite profiles (Punta Gorda, Moa Bay, Cuba)Mineralium Deposita, 2017
- Critical metals (REE, Sc, PGE) in Ni laterites from Cuba and the Dominican RepublicOre Geology Reviews, 2016
- Thermodynamic analysis of selective reduction of nickeliferous limonitic laterite ore by carbon monoxideMineral Processing and Extractive Metallurgy: Transactions of the Institutions of Mining and Metallurgy: Section C, 2015
- Hydro–pyro integration in the processing of nickel lateritesMinerals Engineering, 2013
- Different strategies for recovering metals from CARON process residueJournal of Hazardous Materials, 2011
- Thermal decomposition of chromite spinel with chlorite admixtureThermochimica Acta, 2008
- Reduction roasting of limonite ores: effect of dehydroxylationInternational Journal of Mineral Processing, 2006