Abstract
In the Mathlab Simulink software environment a model of a second-order discharge-pulse system with a nonlinear description of the equivalent electrical resistance of a spark-erosion load was created. Under conditions of forced limitation of the duration of discharge pulses for a series of values of the inductance and capacitance of the discharge circuit, as well as the initial conditions in them, transients in the system are calculated. In groups of modes with fixed values of the initial voltage on the working capacitor and in groups of modes with fixed values of voltage amplitude of the free discharges on load, the dependences on duration of the discharge pulses of their energy, pulse power in the load, and the rate of its change are plotted and analyzed. It is shown that in both groups of modes for each set of parameter values of: the duration of the discharge pulses, the capacitance of the working capacitor and the initial voltage on it, there is a value of the inductance of the discharge circuit, which provides the highest values of the rate of change of the pulse power in the load. In the groups of modes with fixed values of the voltage amplitude of free discharges on the load, for the set of parameters described above, there are also values of the discharge circuit inductance that provide the highest values of energy and pulse power in the load. For three values of the inductance of the discharge circuit, the problems of increasing the above pulse parameters are graphically solved. References 27, figures 11. В програмному середовищі Mathlab Simulink створено модель розрядно-імпульсної системи другого порядку з нелінійним описом еквівалентного електричного опору іскроерозійного навантаження. В умовах примусового обмеження тривалості розрядних імпульсів для низки значень індуктивності та ємності розрядного контуру і початкових умов на них розраховано перехідні електромагнітні процеси в системі. В групах режимів з фіксованими значеннями початкової напруги на робочому конденсаторі та в групах режимів з фіксованими значеннями амплітуди напруги вільних розрядів на навантаженні побудовано і проаналізовано залежності від тривалості розрядних імпульсів їхньої енергії, імпульсної потужності у навантаженні та швидкості її зміни. Показано, що в обох групах режимів для кожного набору значень параметрів: тривалості розрядних імпульсів, ємності робочого конденсатора і початкової напруги на ньому існує значення індуктивності розрядного контуру, яке забезпечує найбільші значення швидкості змін імпульсної потужності у навантаженні. У групах режимів з фіксованими значеннями амплітуди напруги вільних розрядів на навантаженні для описаного вище набору параметрів також існують значення індуктивності розрядного контуру, які забезпечують найбільші значення енергії та імпульсної потужності у навантаженні. Для трьох значень індуктивності розрядного контуру графічно вирішені задачі підвищення вказаних вище параметрів імпульсів. Бібл. 27, рис. 11.

This publication has 14 references indexed in Scilit: