N. A. Shydlovska
N. A. Shydlovska has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- S. M. Zakharchenko
Інститут електродинаміки НАН України
12 shared publications - M. A. Kulida
Національний університет біоресурсів і природокористування України
4 shared publications - Iryna Mazurenko
Institute of Electrodynamics, National Academy of Sciences of Ukraine, Kiev, Ukraine
3 shared publications - Nikolay Zakharchenko
Інститут загальної та неорганічної хімії ім. В.І. Вернадського НАН України
3 shared publications O.P. Cherkaskyi
2 shared publications- S. A. Zakusilo
Інститут електродинаміки НАН України
2 shared publications
Latest Publications
- Open Access
- 28 September 2025
- Published by Vidnovluvana energetika in Vidnovluvana energetika
- No. 3(82),p. 204-217
ПОТЕНЦІАЛ ВИКОРИСТАННЯ ТЕХНОЛОГІЧНИХ ВИКИДІВ ВОДНЮ В ЕНЕРГЕТИЦІ ТА ХІМІЧНІЙ ПРОМИСЛОВОСТІ
Розглянуто технологічні процеси, в яких водень отримують як супутній продукт плазмоерозійного й електрохімічного коагуляційного очищення поверхневих вод для потреб енергетики та міських водогонів, а також виробництва чистого високодисперсного гідроксиду алюмінію для хімічної промисловості. Запропоновано розширити прийняту класифікацію видів водню за технологією, сировиною та видом енергії отримання введенням нової умовної «кольорової» категорії – сріблястий водень (Silver Hydrogen). Описано технологічну карту типового циклу водопідготовки теплових агрегатів ТЕЦ та проаналізовано недоліки операції реагентної хімічної коагуляції в її складі. Описано альтернативні їй операції електрохімічного та плазмоерозійного коагуляційного очищення поверхневих природних вод і наведено порівняльний аналіз їх енергетичних показників. Розраховано енергію, яка генерується під час спалювання водню, що виділяється як супутній продукт у цих процесах, та проаналізовано можливе підвищення їх енергоефективності за умов використання різних металів, що утворюють коагулянт. Визначено енергетичний потенціал використання викидів водню в процесі отримання гідроксиду алюмінію на виробничому комбінаті хімічної промисловості. Бібл. 45, рис. 2, табл. 2.
- 28 September 2025
- Published by Vidnovluvana energetika in Vidnovluvana energetika
- No. 3(82),p. 204-217
Open AccessПОТЕНЦІАЛ ВИКОРИСТАННЯ ТЕХНОЛОГІЧНИХ ВИКИДІВ ВОДНЮ В ЕНЕРГЕТИЦІ ТА ХІМІЧНІЙ ПРОМИСЛОВОСТІ
Розглянуто технологічні процеси, в яких водень отримують як супутній продукт плазмоерозійного й електрохімічного коагуляційного очищення поверхневих вод для потреб енергетики та міських водогонів, а також виробництва чистого високодисперсного гідроксиду алюмінію для хімічної промисловості. Запропоновано розширити прийняту класифікацію видів водню за технологією, сировиною та видом енергії отримання введенням нової умовної «кольорової» категорії – сріблястий водень (Silver Hydrogen). Описано технологічну карту типового циклу водопідготовки теплових агрегатів ТЕЦ та проаналізовано недоліки операції реагентної хімічної коагуляції в її складі. Описано альтернативні їй операції електрохімічного та плазмоерозійного коагуляційного очищення поверхневих природних вод і наведено порівняльний аналіз їх енергетичних показників. Розраховано енергію, яка генерується під час спалювання водню, що виділяється як супутній продукт у цих процесах, та проаналізовано можливе підвищення їх енергоефективності за умов використання різних металів, що утворюють коагулянт. Визначено енергетичний потенціал використання викидів водню в процесі отримання гідроксиду алюмінію на виробничому комбінаті хімічної промисловості. Бібл. 45, рис. 2, табл. 2.
- Open Access
- 2 January 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 1,p. 73-85
Distribution of volumes of plasma channels components between metal granules in working liquids
Introduction. Expanding the capabilities of a number of modern technologies and improving quality of their products require detailed spark and plasma erosion processes control in metal granules layers (MGL). Problem. Traditional measurement of exclusively electrical parameters of these processes, even in the case of multi-electrode systems, provides only a general vision, not allowing monitoring processes in individual plasma channels. Optical control methods make it possible to simultaneously have information about almost every plasma channel in the MGL. The aim of the article is to study the characteristic components of plasma channels arising as a result of the flow of discharge currents in the MGL and to establish the laws of distribution of their volumes and their ratios. Methodology. During the experiments, photographs of plasma channels resulting from the flow of discharge current pulses between Al granules immersed in distilled water were obtained. Using the specialized ToupView program, the volumes of equivalent ellipsoids of rotation, approximating the colored halos and white cores of the plasma channels were determined. Discrete distributions of the volumes of the halo and cores of plasma channels, as well as their ratios were constructed both with and without procedures for screening out «anomalous» results. The efficiency of approximation of discrete distributions obtained in practice by continuous theoretical distributions Weibull, Rosin-Rammler and log-normal was estimated. Results. It is shown that of all the considered theoretical distributions of halo and cores of plasma channels volumes, as well as their ratios, the most adequate is the log-normal one. Originality. For the first time distributions of volumes of halo and cores of plasma channels were studied and their comparative analysis with the size distributions of erosion particles and dimples on the surface of Al granules was given. Practical significance. Taking into account the new obtained results, a technique for constructing distributions of volumes of halo and cores of plasma channels and determining their parameters has been developed. References 53, figures 7, tables 5.
- 2 January 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 1,p. 73-85
Open AccessDistribution of volumes of plasma channels components between metal granules in working liquids
Introduction. Expanding the capabilities of a number of modern technologies and improving quality of their products require detailed spark and plasma erosion processes control in metal granules layers (MGL). Problem. Traditional measurement of exclusively electrical parameters of these processes, even in the case of multi-electrode systems, provides only a general vision, not allowing monitoring processes in individual plasma channels. Optical control methods make it possible to simultaneously have information about almost every plasma channel in the MGL. The aim of the article is to study the characteristic components of plasma channels arising as a result of the flow of discharge currents in the MGL and to establish the laws of distribution of their volumes and their ratios. Methodology. During the experiments, photographs of plasma channels resulting from the flow of discharge current pulses between Al granules immersed in distilled water were obtained. Using the specialized ToupView program, the volumes of equivalent ellipsoids of rotation, approximating the colored halos and white cores of the plasma channels were determined. Discrete distributions of the volumes of the halo and cores of plasma channels, as well as their ratios were constructed both with and without procedures for screening out «anomalous» results. The efficiency of approximation of discrete distributions obtained in practice by continuous theoretical distributions Weibull, Rosin-Rammler and log-normal was estimated. Results. It is shown that of all the considered theoretical distributions of halo and cores of plasma channels volumes, as well as their ratios, the most adequate is the log-normal one. Originality. For the first time distributions of volumes of halo and cores of plasma channels were studied and their comparative analysis with the size distributions of erosion particles and dimples on the surface of Al granules was given. Practical significance. Taking into account the new obtained results, a technique for constructing distributions of volumes of halo and cores of plasma channels and determining their parameters has been developed. References 53, figures 7, tables 5.
- Open Access
- 18 October 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 6,p. 72-83
Spectral and optic-metric methods of monitoring parameters of plasma channels caused by discharge currents between metals granules in working liquids
Introduction. Spark-erosion processing of metals and alloys granules in working liquids is the basis of a several technological processes. Efficiency of energy use in them and parameters of the resulting product largely depend on the accuracy of stabilization and regulation of pulse power in each plasma channel between the granules. To achieve this, until now only the voltage and current of the discharge pulses in the entire layer of granules have been controlled. Problem. The measurement methods, which are used, are not effective enough for monitoring the parameters of individual plasma channels and predicting the size distribution of eroded metals particles at the stage of their formation. The aim of the work is to develop a method for determining the volumes of components of plasma channels in layers of metals granules during their spark-erosion treatment to predict the size distribution of eroded metal particles at the stage of their formation, as well as to simplify the method of spectrometric analysis of the elemental composition of substances surrounding plasma channels for the operational prediction of the chemical composition of resulting products. Methodology. A series of experiments were carried out on spark-erosion processing of Al and Ag granules layers in distilled water. Using a digital camera, images of the plasma channels in them were obtained. Based on the theory of pulsed electrical breakdown of liquid dielectrics, an analysis of the components of plasma channels was carried out. Using the specialized ToupView program, the volumes of equivalent ellipsoids of rotation were determined, approximating the halos of colored radiation likely arising from streamers, as well as the spark cores of plasma channels emitting white light. The shades of the resulting radiation were studied for several metals and working liquids. The obtained data were compared with the known results of spectrometric studies for the same elements excited by similar mechanisms. Results. The theory of discharge-pulse systems for spark-erosion processing of granular conductive media has been developed in the direction of new methods for monitoring the parameters of discharge pulses and predicting the chemical composition and size distribution parameters of eroded metal particles at the stage of their production. An optic-metric method has been developed for determining the volumes of halos and cores of plasma channels. A simplified spectral method for determining the chemical composition of erosion particles based on the shade of the resulting radiation was proposed. Originality. The developed new optic-metric method makes it possible to obtain information about almost every plasma channel, which refines predictions of the size distribution of erosion particles. To implement the method, general-purpose hardware and specialized software that is freely available are used. The developed method of simplified spectral analysis of excited atoms makes it possible to make preliminary predictions of the chemical composition of the obtained erosion particles already at the stage of their formation without the use of expensive specialized equipment. Practical significance. The ratio of the volumes of halos and cores of plasma channels between Al and Ag granules in distilled water was measured. An analysis of the emission spectra of plasma channel halos between Al, Ag and Cu granules in distilled water, Fe in ethyl alcohol, Ni-Mn-Ga and Ti-Zr-Ni alloys in liquid nitrogen, and Ti-Zr-Ni in liquid argon was carried out. Based on spectrometry data, the resulting shades of these radiations were substantiated and their description in the RGB system is given. References 56, table 1, figures 4.
- 18 October 2024
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 6,p. 72-83
Open AccessSpectral and optic-metric methods of monitoring parameters of plasma channels caused by discharge currents between metals granules in working liquids
Introduction. Spark-erosion processing of metals and alloys granules in working liquids is the basis of a several technological processes. Efficiency of energy use in them and parameters of the resulting product largely depend on the accuracy of stabilization and regulation of pulse power in each plasma channel between the granules. To achieve this, until now only the voltage and current of the discharge pulses in the entire layer of granules have been controlled. Problem. The measurement methods, which are used, are not effective enough for monitoring the parameters of individual plasma channels and predicting the size distribution of eroded metals particles at the stage of their formation. The aim of the work is to develop a method for determining the volumes of components of plasma channels in layers of metals granules during their spark-erosion treatment to predict the size distribution of eroded metal particles at the stage of their formation, as well as to simplify the method of spectrometric analysis of the elemental composition of substances surrounding plasma channels for the operational prediction of the chemical composition of resulting products. Methodology. A series of experiments were carried out on spark-erosion processing of Al and Ag granules layers in distilled water. Using a digital camera, images of the plasma channels in them were obtained. Based on the theory of pulsed electrical breakdown of liquid dielectrics, an analysis of the components of plasma channels was carried out. Using the specialized ToupView program, the volumes of equivalent ellipsoids of rotation were determined, approximating the halos of colored radiation likely arising from streamers, as well as the spark cores of plasma channels emitting white light. The shades of the resulting radiation were studied for several metals and working liquids. The obtained data were compared with the known results of spectrometric studies for the same elements excited by similar mechanisms. Results. The theory of discharge-pulse systems for spark-erosion processing of granular conductive media has been developed in the direction of new methods for monitoring the parameters of discharge pulses and predicting the chemical composition and size distribution parameters of eroded metal particles at the stage of their production. An optic-metric method has been developed for determining the volumes of halos and cores of plasma channels. A simplified spectral method for determining the chemical composition of erosion particles based on the shade of the resulting radiation was proposed. Originality. The developed new optic-metric method makes it possible to obtain information about almost every plasma channel, which refines predictions of the size distribution of erosion particles. To implement the method, general-purpose hardware and specialized software that is freely available are used. The developed method of simplified spectral analysis of excited atoms makes it possible to make preliminary predictions of the chemical composition of the obtained erosion particles already at the stage of their formation without the use of expensive specialized equipment. Practical significance. The ratio of the volumes of halos and cores of plasma channels between Al and Ag granules in distilled water was measured. An analysis of the emission spectra of plasma channel halos between Al, Ag and Cu granules in distilled water, Fe in ethyl alcohol, Ni-Mn-Ga and Ti-Zr-Ni alloys in liquid nitrogen, and Ti-Zr-Ni in liquid argon was carried out. Based on spectrometry data, the resulting shades of these radiations were substantiated and their description in the RGB system is given. References 56, table 1, figures 4.
- Open Access
- 27 October 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2022 (6) , 3-12
FEATURES OF TRANSIENTS IN SECOND-ORDER CIRCUITS WITH A NONLINEAR MODEL OF SPARK-EROSION LOAD UNDER CONDITIONS OF FORCED LIMITATION OF THEIR DURATION
In the Mathlab Simulink software environment a model of a second-order discharge-pulse system with a nonlinear description of the equivalent electrical resistance of a spark-erosion load was created. Under conditions of forced limitation of the duration of discharge pulses for a series of values of the inductance and capacitance of the discharge circuit, as well as the initial conditions in them, transients in the system are calculated. In groups of modes with fixed values of the initial voltage on the working capacitor and in groups of modes with fixed values of voltage amplitude of the free discharges on load, the dependences on duration of the discharge pulses of their energy, pulse power in the load, and the rate of its change are plotted and analyzed. It is shown that in both groups of modes for each set of parameter values of: the duration of the discharge pulses, the capacitance of the working capacitor and the initial voltage on it, there is a value of the inductance of the discharge circuit, which provides the highest values of the rate of change of the pulse power in the load. In the groups of modes with fixed values of the voltage amplitude of free discharges on the load, for the set of parameters described above, there are also values of the discharge circuit inductance that provide the highest values of energy and pulse power in the load. For three values of the inductance of the discharge circuit, the problems of increasing the above pulse parameters are graphically solved. References 27, figures 11. В програмному середовищі Mathlab Simulink створено модель розрядно-імпульсної системи другого порядку з нелінійним описом еквівалентного електричного опору іскроерозійного навантаження. В умовах примусового обмеження тривалості розрядних імпульсів для низки значень індуктивності та ємності розрядного контуру і початкових умов на них розраховано перехідні електромагнітні процеси в системі. В групах режимів з фіксованими значеннями початкової напруги на робочому конденсаторі та в групах режимів з фіксованими значеннями амплітуди напруги вільних розрядів на навантаженні побудовано і проаналізовано залежності від тривалості розрядних імпульсів їхньої енергії, імпульсної потужності у навантаженні та швидкості її зміни. Показано, що в обох групах режимів для кожного набору значень параметрів: тривалості розрядних імпульсів, ємності робочого конденсатора і початкової напруги на ньому існує значення індуктивності розрядного контуру, яке забезпечує найбільші значення швидкості змін імпульсної потужності у навантаженні. У групах режимів з фіксованими значеннями амплітуди напруги вільних розрядів на навантаженні для описаного вище набору параметрів також існують значення індуктивності розрядного контуру, які забезпечують найбільші значення енергії та імпульсної потужності у навантаженні. Для трьох значень індуктивності розрядного контуру графічно вирішені задачі підвищення вказаних вище параметрів імпульсів. Бібл. 27, рис. 11.
- 27 October 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2022 (6) , 3-12
Open AccessFEATURES OF TRANSIENTS IN SECOND-ORDER CIRCUITS WITH A NONLINEAR MODEL OF SPARK-EROSION LOAD UNDER CONDITIONS OF FORCED LIMITATION OF THEIR DURATION
In the Mathlab Simulink software environment a model of a second-order discharge-pulse system with a nonlinear description of the equivalent electrical resistance of a spark-erosion load was created. Under conditions of forced limitation of the duration of discharge pulses for a series of values of the inductance and capacitance of the discharge circuit, as well as the initial conditions in them, transients in the system are calculated. In groups of modes with fixed values of the initial voltage on the working capacitor and in groups of modes with fixed values of voltage amplitude of the free discharges on load, the dependences on duration of the discharge pulses of their energy, pulse power in the load, and the rate of its change are plotted and analyzed. It is shown that in both groups of modes for each set of parameter values of: the duration of the discharge pulses, the capacitance of the working capacitor and the initial voltage on it, there is a value of the inductance of the discharge circuit, which provides the highest values of the rate of change of the pulse power in the load. In the groups of modes with fixed values of the voltage amplitude of free discharges on the load, for the set of parameters described above, there are also values of the discharge circuit inductance that provide the highest values of energy and pulse power in the load. For three values of the inductance of the discharge circuit, the problems of increasing the above pulse parameters are graphically solved. References 27, figures 11. В програмному середовищі Mathlab Simulink створено модель розрядно-імпульсної системи другого порядку з нелінійним описом еквівалентного електричного опору іскроерозійного навантаження. В умовах примусового обмеження тривалості розрядних імпульсів для низки значень індуктивності та ємності розрядного контуру і початкових умов на них розраховано перехідні електромагнітні процеси в системі. В групах режимів з фіксованими значеннями початкової напруги на робочому конденсаторі та в групах режимів з фіксованими значеннями амплітуди напруги вільних розрядів на навантаженні побудовано і проаналізовано залежності від тривалості розрядних імпульсів їхньої енергії, імпульсної потужності у навантаженні та швидкості її зміни. Показано, що в обох групах режимів для кожного набору значень параметрів: тривалості розрядних імпульсів, ємності робочого конденсатора і початкової напруги на ньому існує значення індуктивності розрядного контуру, яке забезпечує найбільші значення швидкості змін імпульсної потужності у навантаженні. У групах режимів з фіксованими значеннями амплітуди напруги вільних розрядів на навантаженні для описаного вище набору параметрів також існують значення індуктивності розрядного контуру, які забезпечують найбільші значення енергії та імпульсної потужності у навантаженні. Для трьох значень індуктивності розрядного контуру графічно вирішені задачі підвищення вказаних вище параметрів імпульсів. Бібл. 27, рис. 11.
- Open Access
- 4 July 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2022 (4) , 69-77
PHYSICAL AND TECHNICAL-ECONOMIC ASPECTS OF MODERN METHODS OF WATER TREATMENT FOR THERMAL AND NUCLEAR POWER ENGINEERING
A critical analysis of modern electric-physical and electric-chemical methods of water treatment is given in the context of the efficiency of treatment surface natural waters for the thermal and nuclear power engineering. Physical aspects of electric-chemical coagulation are considered. Theoretical values of the specific energy of destruction of passivation films on the surface of aluminum and iron electrodes, as well as the minimum voltages required for this, are calculated. The mechanisms of conversion of the energy of discharge pulses in a layer of granules of metal forming a coagulant immersed in water are described. According to the described model of energy conversion processes, the minimum theoretical values of the specific energy of the formation of erosive Al and Fe particles from molten and evaporated metal are calculated. A technique for studying the energy efficiency of plasma-erosion coagulation under laboratory conditions is described, and the results of these studies are presented. The specific energy of purification of 1 m3 of water by electric-chemical and plasma-erosion coagulation was calculated in various modes using Al and Fe as metals forming the coagulant. Based on the analysis of the obtained results, recommendations for ways to improve the energy efficiency of plasma-erosion coagulation modes are given. References 29, figure 1, table 1.
- 4 July 2022
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2022 (4) , 69-77
Open AccessPHYSICAL AND TECHNICAL-ECONOMIC ASPECTS OF MODERN METHODS OF WATER TREATMENT FOR THERMAL AND NUCLEAR POWER ENGINEERING
A critical analysis of modern electric-physical and electric-chemical methods of water treatment is given in the context of the efficiency of treatment surface natural waters for the thermal and nuclear power engineering. Physical aspects of electric-chemical coagulation are considered. Theoretical values of the specific energy of destruction of passivation films on the surface of aluminum and iron electrodes, as well as the minimum voltages required for this, are calculated. The mechanisms of conversion of the energy of discharge pulses in a layer of granules of metal forming a coagulant immersed in water are described. According to the described model of energy conversion processes, the minimum theoretical values of the specific energy of the formation of erosive Al and Fe particles from molten and evaporated metal are calculated. A technique for studying the energy efficiency of plasma-erosion coagulation under laboratory conditions is described, and the results of these studies are presented. The specific energy of purification of 1 m3 of water by electric-chemical and plasma-erosion coagulation was calculated in various modes using Al and Fe as metals forming the coagulant. Based on the analysis of the obtained results, recommendations for ways to improve the energy efficiency of plasma-erosion coagulation modes are given. References 29, figure 1, table 1.
- Open Access
- 20 September 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Praci Institutu elektrodinamiki Nacionalanoi akademii nauk Ukraini
- Vol. 2021 (59) , 11-19
DISCREPANCY PARAMETERS OF APPROXIMATIONS OF DISCRETELY SPECIFIED DEPENDENCIES BY ANALYTICAL FUNCTIONS AND SEARCH CRITERIA FOR OPTIMAL VALUES OF THEIR COEFFICIENTS
Universal discrepancy parameters of approximations of discretely specified dependencies by analytical functions and search criteria for optimal values of their coefficients, as well as analysis of features of their application are described. Discrepancy parameters of approximations, which do not depend on the ranges of variation of the values of functions and the number of points of a discretely specified dependence, are proposed. They can be effective for objectively comparing the quality of approximations of any dependencies by any functions. Approximations of a discretely specified dependence of the mathematical expectation of the equivalent electrical resistance of a layer of aluminum granules during spark-erosion dispersion in water on the instantaneous values of the discharge current are carried out. As approximating functions, we chose a power function with an exponent factor –1 and a function based on exponential. Using the criteria of the least approximation error, the optimal values of the coefficients of both approximating functions are founded. It is shown in which cases it is advisable to use the combined search criteria for the optimal values of the coefficients of the approximating functions, and in which are enough simple one-component ones. Ref. 27, fig. 2, tables 2.
- 20 September 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Praci Institutu elektrodinamiki Nacionalanoi akademii nauk Ukraini
- Vol. 2021 (59) , 11-19
Open AccessDISCREPANCY PARAMETERS OF APPROXIMATIONS OF DISCRETELY SPECIFIED DEPENDENCIES BY ANALYTICAL FUNCTIONS AND SEARCH CRITERIA FOR OPTIMAL VALUES OF THEIR COEFFICIENTS
Universal discrepancy parameters of approximations of discretely specified dependencies by analytical functions and search criteria for optimal values of their coefficients, as well as analysis of features of their application are described. Discrepancy parameters of approximations, which do not depend on the ranges of variation of the values of functions and the number of points of a discretely specified dependence, are proposed. They can be effective for objectively comparing the quality of approximations of any dependencies by any functions. Approximations of a discretely specified dependence of the mathematical expectation of the equivalent electrical resistance of a layer of aluminum granules during spark-erosion dispersion in water on the instantaneous values of the discharge current are carried out. As approximating functions, we chose a power function with an exponent factor –1 and a function based on exponential. Using the criteria of the least approximation error, the optimal values of the coefficients of both approximating functions are founded. It is shown in which cases it is advisable to use the combined search criteria for the optimal values of the coefficients of the approximating functions, and in which are enough simple one-component ones. Ref. 27, fig. 2, tables 2.
- Open Access
- 16 August 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2021 (5) , 3-10
ANALYTICAL NONLINEAR-PROBABILISTIC MODEL OF THE EQUIVALENT ELECTRICAL RESISTANCE OF A LAYER OF METAL GRANULES
As a result of processing the experimental data, an analytical continuous nonlinear-probabilistic model of the equivalent electrical resistance of a layer of metal granules in the working liquid was created. It is described by four equations: the modified Gaussian distribution and the dependences on the instantaneous values of the discharge current in the layer of metal granules of the mathematical expectation, dispersion and correction coefficient of the range of its equivalent electrical resistance. Based on the form of the dependences obtained during the experiments and the physics of the processes that occur in this case, two main groups of analytical functions are considered that approximate the obtained dependences. Criteria and methods for finding the optimal values of their coefficients are described. The adequacy of the approximation of each of the three obtained dependences by several analytical functions was investigated, the optimal values of the coefficients of which were found by the described method. Analytical functions was compared, which approximate the dependence of the mathematical expectation of the equivalent electrical resistance of a layer of metal granules on the instantaneous values of the discharge current in it with the known nonlinear models of the resistance of such a medium. References 33, figures 3, tables 3. В результаті оброблення даних експериментів створено аналітичну безперервну нелінійно-імовірнісну модель еквівалентного електричного опору шару металевих гранул в робочій рідині. Вона описується чотирма рівняннями: модифікованого розподілу Гауса та залежностями від миттєвих значень розрядного струму у шарі металевих гранул математичного сподівання, дисперсії і коефіцієнта корекції діапазону його еквівалентного електричного опору. Виходячи з вигляду отриманих у ході експериментів залежностей та фізики процесів, які при цьому відбуваються, розглянуто дві основні групи аналітичних функцій, які апроксимують отримані залежності. Описано критерії та методику пошуку оптимальних значень їхніх коефіцієнтів. Досліджено адекватність апроксимації кожної з трьох отриманих залежностей кількома аналітичними функціями, оптимальні значення коефіцієнтів яких знайдено за описаною методикою. Проведено порівняння аналітичних функцій, що апроксимують залежність математичного сподівання еквівалентного електричного опору шару металевих гранул від миттєвих значень розрядного струму в ньому, з відомими нелінійними моделями опору такого середовища. Бібл. 33, рис. 3, табл. 3.
- 16 August 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2021 (5) , 3-10
Open AccessANALYTICAL NONLINEAR-PROBABILISTIC MODEL OF THE EQUIVALENT ELECTRICAL RESISTANCE OF A LAYER OF METAL GRANULES
As a result of processing the experimental data, an analytical continuous nonlinear-probabilistic model of the equivalent electrical resistance of a layer of metal granules in the working liquid was created. It is described by four equations: the modified Gaussian distribution and the dependences on the instantaneous values of the discharge current in the layer of metal granules of the mathematical expectation, dispersion and correction coefficient of the range of its equivalent electrical resistance. Based on the form of the dependences obtained during the experiments and the physics of the processes that occur in this case, two main groups of analytical functions are considered that approximate the obtained dependences. Criteria and methods for finding the optimal values of their coefficients are described. The adequacy of the approximation of each of the three obtained dependences by several analytical functions was investigated, the optimal values of the coefficients of which were found by the described method. Analytical functions was compared, which approximate the dependence of the mathematical expectation of the equivalent electrical resistance of a layer of metal granules on the instantaneous values of the discharge current in it with the known nonlinear models of the resistance of such a medium. References 33, figures 3, tables 3. В результаті оброблення даних експериментів створено аналітичну безперервну нелінійно-імовірнісну модель еквівалентного електричного опору шару металевих гранул в робочій рідині. Вона описується чотирма рівняннями: модифікованого розподілу Гауса та залежностями від миттєвих значень розрядного струму у шарі металевих гранул математичного сподівання, дисперсії і коефіцієнта корекції діапазону його еквівалентного електричного опору. Виходячи з вигляду отриманих у ході експериментів залежностей та фізики процесів, які при цьому відбуваються, розглянуто дві основні групи аналітичних функцій, які апроксимують отримані залежності. Описано критерії та методику пошуку оптимальних значень їхніх коефіцієнтів. Досліджено адекватність апроксимації кожної з трьох отриманих залежностей кількома аналітичними функціями, оптимальні значення коефіцієнтів яких знайдено за описаною методикою. Проведено порівняння аналітичних функцій, що апроксимують залежність математичного сподівання еквівалентного електричного опору шару металевих гранул від миттєвих значень розрядного струму в ньому, з відомими нелінійними моделями опору такого середовища. Бібл. 33, рис. 3, табл. 3.
- Open Access
- 23 February 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2021 (2) , 3-12
DISCRETE NONLINEAR-PROBABILISTIC MODEL OF THE EQUIVALENT ELECTRICAL RESISTANCE OF A LAYER OF METAL GRANULES
Two strategies for constructing nonlinear-probabilistic models of the equivalent electrical resistance of a layer of metal granules at their spark-erosion and plasma-erosion treatment and algorithms for their implementation are presented. A method for taking into account the parametric properties of such loads in their nonlinear and nonlinear-probabilistic models is described. Based on the data of direct experiments, the distributions of the electrical resistance of a layer of aluminum granules in tap water were obtained for eleven fixed values of the discharge current in it for both the leading and trailing edges of its pulses. The features of these distributions are described for different edges of the discharge current pulses. It has been proved that the obtained distributions can be adequately described by the normal law. The parameters of the normal law for each distribution obtained as a result of direct experiments are founded by the method of moments. A nonlinear-probabilistic model of the equivalent electrical resistance of a layer of aluminum granules in tap water is created, taking into account the main hysteresis of the dependence of resistance on current. It is shown that at large values of discharge currents, the nonlinear-probabilistic model of the equivalent electrical resistance of the layers of metal granules tends to degenerate into a nonlinear model. References 27, figures 4
- 23 February 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2021 (2) , 3-12
Open AccessDISCRETE NONLINEAR-PROBABILISTIC MODEL OF THE EQUIVALENT ELECTRICAL RESISTANCE OF A LAYER OF METAL GRANULES
Two strategies for constructing nonlinear-probabilistic models of the equivalent electrical resistance of a layer of metal granules at their spark-erosion and plasma-erosion treatment and algorithms for their implementation are presented. A method for taking into account the parametric properties of such loads in their nonlinear and nonlinear-probabilistic models is described. Based on the data of direct experiments, the distributions of the electrical resistance of a layer of aluminum granules in tap water were obtained for eleven fixed values of the discharge current in it for both the leading and trailing edges of its pulses. The features of these distributions are described for different edges of the discharge current pulses. It has been proved that the obtained distributions can be adequately described by the normal law. The parameters of the normal law for each distribution obtained as a result of direct experiments are founded by the method of moments. A nonlinear-probabilistic model of the equivalent electrical resistance of a layer of aluminum granules in tap water is created, taking into account the main hysteresis of the dependence of resistance on current. It is shown that at large values of discharge currents, the nonlinear-probabilistic model of the equivalent electrical resistance of the layers of metal granules tends to degenerate into a nonlinear model. References 27, figures 4
- Open Access
- 14 January 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2021 (1) , 10-22
PECULIARITIES OF THE DIAMETER DISTRIBUTIONS OBTAINED AT SUBMILISECOND DURATION OF DISCHARGE PULSES SPARK-EROSIVE ALUMINUM PARTICLES AND CAVERNS ON THE SURFACE OF ITS GRANULES
The conditions and technique for obtaining single-mode size distributions of spark-erosive aluminum particles are given. The statistical parameters of the size distributions of spark-erosive aluminum particles and caverns on the surface of its granules, obtained at a submilisecond duration of discharge pulses were calculated. A comparative analysis of the volumes of metal of erosion caverns and particles is carried out. The agreement of the diameter distributions of spark-erosive particles and caverns obtained in practice with the following theoretical distributions of a continuous random variable: Gauss, Weibull, the integral of the Rosin-Rammler function, and also log-normal distribution is verified. In this case, the parameters of theoretical distributions were calculated both by the statistical parameters of the distributions obtained in practice, and by the criterion of the smallest value of the average module of the relative deviation of the theoretical and practical distributions. It has been shown that for the values of the parameters of theoretical distributions that correspond to the statistical parameters of practical distributions, the distribution of erosive particles by diameters is in the best agreement with the Gauss distribution, and the caverns – with the distribution of integral of the Rosin-Rammler function. References 27, figures 2, tables 3.
- 14 January 2021
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2021 (1) , 10-22
Open AccessPECULIARITIES OF THE DIAMETER DISTRIBUTIONS OBTAINED AT SUBMILISECOND DURATION OF DISCHARGE PULSES SPARK-EROSIVE ALUMINUM PARTICLES AND CAVERNS ON THE SURFACE OF ITS GRANULES
The conditions and technique for obtaining single-mode size distributions of spark-erosive aluminum particles are given. The statistical parameters of the size distributions of spark-erosive aluminum particles and caverns on the surface of its granules, obtained at a submilisecond duration of discharge pulses were calculated. A comparative analysis of the volumes of metal of erosion caverns and particles is carried out. The agreement of the diameter distributions of spark-erosive particles and caverns obtained in practice with the following theoretical distributions of a continuous random variable: Gauss, Weibull, the integral of the Rosin-Rammler function, and also log-normal distribution is verified. In this case, the parameters of theoretical distributions were calculated both by the statistical parameters of the distributions obtained in practice, and by the criterion of the smallest value of the average module of the relative deviation of the theoretical and practical distributions. It has been shown that for the values of the parameters of theoretical distributions that correspond to the statistical parameters of practical distributions, the distribution of erosive particles by diameters is in the best agreement with the Gauss distribution, and the caverns – with the distribution of integral of the Rosin-Rammler function. References 27, figures 2, tables 3.
- Open Access
- 5 May 2020
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2020 (3) , 69-78
PROGRESS OF SEMICONDUCTOR DISCHARGE-PULSE SYSTEMS FOR PROCESSING GRANULAR CONDUCTIVE MEDIA
Joomla! - the dynamic portal engine and content management system
- 5 May 2020
- Published by National Academy of Sciences of Ukraine (Co. LTD Ukrinformnauka) (Publications) in Tekhnichna Elektrodynamika
- Vol. 2020 (3) , 69-78
Open AccessPROGRESS OF SEMICONDUCTOR DISCHARGE-PULSE SYSTEMS FOR PROCESSING GRANULAR CONDUCTIVE MEDIA
Joomla! - the dynamic portal engine and content management system