Particle Aspect-Ratio and Agglomeration-State Effects on the Effective Thermal Conductivity of Aqueous Suspensions of Multiwalled Carbon Nanotubes
Authors:
- 9 June 2010
- journal article
- Published by Wiley in Journal of Heat Transfer
- Vol. 132 (8) , 082402
Abstract
The effective thermal conductivities of aqueous nanofluids containing surfactant-stabilized multiwalled carbon nanotubes were measured and compared with the predictions of effective medium theory (Nan, C.-W., et al., 1997, “Effective Thermal Conductivity of Particulate Composites With Interfacial Thermal Resistance,” J. Appl. Phys., 81(10), pp. 6692–6699). Detailed characterization of nanotube morphology was carried out through electron microscopy, while the nanotube agglomeration state was monitored through optical microscopy and absorption measurements. An optimum surfactant-to-nanotube mass ratio was found for the particular surfactant, sodium dodecylbenzene sulfonate, which resulted in the greatest increase in thermal conductivity. Taking into consideration the volume-weighted aspect ratio of the nanotubes, the measured thermal conductivities of the suspensions were shown to be in good agreement with calculations for a reasonable choice of interfacial resistance on the particle/liquid interface. The effect of particle aspect ratio on the suspension’s thermal conductivity was further demonstrated and compared with theory by reducing the nanotube length through intense ultrasonication. The effect of particle aggregation on the thermal conductivity was also investigated by destabilizing previously stable suspensions with ethanol addition, which causes surfactant desorption and bundling of nanotubes. The measured thermal conductivities were correlated with absorption measurements and microscopic visualizations to show that particle aggregation decreases the thermal conductivity of the nanofluid by reducing the effective particle aspect ratio.Keywords
This publication has 61 references indexed in Scilit:
- Silicon oil based multiwalled carbon nanotubes nanofluid with optimized thermal conductivity enhancementColloids and Surfaces A: Physicochemical and Engineering Aspects, 2009
- Measurement of the thermal conductivity of a water-based single-wall carbon nanotube colloidal suspension with a modified 3- ω methodNanotechnology, 2009
- Temperature-dependent thermal conductivity of nanorod-based nanofluidsApplied Physics Letters, 2006
- Thermal and rheological properties of carbon nanotube-in-oil dispersionsJournal of Applied Physics, 2006
- Nanofluids containing multiwalled carbon nanotubes and their enhanced thermal conductivitiesJournal of Applied Physics, 2003
- Thermal conductivities of naked and monolayer protected metal nanoparticle based nanofluids: Manifestation of anomalous enhancement and chemical effectsApplied Physics Letters, 2003
- Thermal conductivity of suspension containing SiC particlesJournal of Materials Science Letters, 2002
- Anomalous thermal conductivity enhancement in nanotube suspensionsApplied Physics Letters, 2001
- Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticlesApplied Physics Letters, 2001
- Measuring Thermal Conductivity of Fluids Containing Oxide NanoparticlesJournal of Heat Transfer, 1999