Effects of Compression and Porosity Gradients on Two-Phase Behavior in Gas Diffusion Layer of Proton Exchange Membrane Fuel Cells
Open Access
Abstract
Water management within the gas diffusion layer (GDL) plays an important role in the performance of the proton exchange membrane fuel cell (PEMFC) and its reliability. The compression of the gas diffusion layer during fabrication and assembly has a significant impact on the mass transport, and the porosity gradient design of the gas diffusion layer is an essential way to improve water management. In this paper, the two-dimensional lattice Boltzmann method (LBM) is applied to investigate the two-phase behavior in gas diffusion layers with different porosity gradients under compression. Compression results in an increase in flow resistance below the ribs, prompting the appearance of the flow path of liquid water below the channel, and liquid water breaks through to the channel more quickly. GDLs with linear, multilayer, and inverted V-shaped porosity distributions with an overall porosity of 0.78 are generated to evaluate the effect of porosity gradients on the liquid water transport. The liquid water saturation values within the linear and multilayer GDLs are significantly reduced compared to that of the GDL with uniform porosity, but the liquid water within the inverted V-shaped GDL accumulates in the middle region and is more likely to cause flooding.Keywords
Funding Information
- National Natural Science Foundation of China (52001045, 51779025, 2021JJ11CG004, Z2209-030)
- Science and Technology Innovation Foundation of Dalian, China (52001045, 51779025, 2021JJ11CG004, Z2209-030)
- Laboratory of Transport Pollution Control and Monitoring Technology (52001045, 51779025, 2021JJ11CG004, Z2209-030)
This publication has 54 references indexed in Scilit:
- Effects of pore size gradient in the substrate of a gas diffusion layer on the performance of a proton exchange membrane fuel cellApplied Energy, 2015
- Probing water distribution in compressed fuel-cell gas-diffusion layers using X-ray computed tomographyElectrochemistry Communications, 2015
- Lattice Boltzmann simulation of liquid water transport in microporous and gas diffusion layers of polymer electrolyte membrane fuel cellsJournal of Power Sources, 2015
- Impact of PTFE distribution on the removal of liquid water from a PEMFC electrode by lattice Boltzmann methodInternational Journal of Hydrogen Energy, 2014
- Numerical studies of interfacial phenomena in liquid water transport in polymer electrolyte membrane fuel cells using the lattice Boltzmann methodInternational Journal of Hydrogen Energy, 2013
- Pore-scale flow and mass transport in gas diffusion layer of proton exchange membrane fuel cell with interdigitated flow fieldsInternational Journal of Thermal Sciences, 2012
- Lattice Boltzmann simulations of water transport in gas diffusion layer of a polymer electrolyte membrane fuel cellJournal of Power Sources, 2010
- Optimization of polymer electrolyte fuel cell cathode catalyst layers via direct numerical simulation modelingElectrochimica Acta, 2007
- On pressure and velocity boundary conditions for the lattice Boltzmann BGK modelPhysics of Fluids, 1997
- Lattice Boltzmann model for simulating flows with multiple phases and componentsPhysical Review E, 1993