Tribological Properties of Polycarbonate Blended with High‐density Polyethylene and High‐density Polyethylene Grafted with Maleic Anhydride
Authors:
- 1 February 2007
- journal article
- research article
- Published by Taylor & Francis in Journal of Macromolecular Science, Part B
- Vol. 46 (2) , 373-385
Abstract
High‐density polyethylene (HDPE) and maleic anhydride grafted HDPE (HDPE‐g‐MA) were selected as lubricant and compatibilizer, respectively, for improving the tribological and mechanical properties of polycarbonate (PC). The morphology of worn surfaces and debris was observed by means of scanning electron microscopy (SEM). The mated steel ring surface was analyzed by using SEM combined with energy dispersive spectroscopy (EDS). Both HDPE and HDPE‐g‐MA reduced the friction and wear of pure PC. HDPE‐g‐MA, which had a better compatibility with PC than HDPE, resulted in better improvement of the mechanical and tribological properties of the PC matrix. A 10 vol. % HDPE‐g‐MA reduced the wear of pure PC by 4 orders of magnitude, and the friction coefficient was reduced from 0.86 to 0.22. Such improvements in the tribological behavior resulted from the good self lubrication of HDPE and HDPE‐g‐MA. The PC/HDPE‐g‐MA (S90‐0‐10) polyblend also showed higher notched impact strength than pure PC. It may be a useful material for application in tribological fields.Keywords
This publication has 12 references indexed in Scilit:
- Effect of compatibilizer on the transfer and tribological behaviors of PA46/HDPE polyblendsTribology Letters, 2006
- Recycling of polycarbonate by blending with maleic anhydride grafted ABSPolymer, 2004
- Tribological studies of polyamide 6 and high-density polyethylene blends filled with PTFE and copper oxide and reinforced with short glass fibersWear, 2002
- The friction and wear characteristics of nanometer ZnO filled polytetrafluoroethyleneWear, 2001
- Effect of reactive compatibilizers on the mechanical properties of polycarbonate/poly(acrylonitrile-butadiene-styrene) blendsEuropean Polymer Journal, 2000
- Interfacial enrichment of a compatibilizing graft copolymer in a partially miscible polymer blendPolymer, 1997
- The effect of controlled counterface topography on polymer transfer and wearInternational Journal of Machine Tools and Manufacture, 1995
- The use of glass transition data for characterizing polycarbonatebased blendsEuropean Polymer Journal, 1989
- Morphology-property relationships in polycarbonate-based blends. II. Tensile and impact strengthJournal of Macromolecular Science, Part B, 1980
- Morphology-property relationships in polycarbonate-based blends. I. ModulusJournal of Macromolecular Science, Part B, 1980