Blade Count and Rotational Speed Sensitivity of Vertical‐Axis Turbines Under Guided Vehicle‐Generated Transient Wakes
Open Access
- 23 April 2026
- journal article
- research article
- Published by Wiley in Energy Science & Engineering
- Vol. 14 (7) , 3324-3345
Abstract
Vehicle wakes generate short but energetic gusts that can be used by small roadside turbines, yet the operating conditions that allow a rotor to take full advantage of these events are still not fully clear. Flow‐guiding structures that were previously shown to improve wake redirection and energy capture are employed in this study. However, the combined influence of blade count and prescribed rotational speed under true transient vehicle‐induced inflow has not been examined in a systematic way. In the present study, vertical‐axis turbines with two to six blades were evaluated numerically while a car traveling at 32 m/s produced the unsteady wake. The rotor speed was increased from the nominal value ω₀ = 6.677 rad/s (63.76 rpm, corresponding to a baseline tip‐speed ratio of approximately 0.10) up to 2.2ω₀. The results show a strong dependence of performance on both blade number and rotational speed. The two‐blade configuration provided the most consistent energy extraction and reached a maximum of 158.5 J at 2.1ω₀, representing a 24.5% increase relative to baseline speed. In contrast, higher‐solidity rotors experienced significant performance deterioration at elevated speeds, and several cases produced negative net energy. This behavior was linked to repeated interception of the wake core by returning blades at unfavorable angular positions, leading to transient torque reversal. The findings suggest that, under short‐duration vehicle wakes, low‐solidity rotors operated at carefully selected rotational speeds are more reliable than higher‐blade‐count configurations.Keywords
This publication has 28 references indexed in Scilit:
- Numerical Analysis of Vertical Axis Wind Turbine for Enhanced PerformancesInternational Journal of Aeronautical and Space Sciences, 2025
- Effect of rotation curvature correction and inviscid spatial discretization scheme on the aerodynamics of vertical axis wind turbineJournal of Hydrodynamics, 2024
- Optimizing a vertical axis wind turbine with helical blades: Application of 3D CFD and Taguchi methodEnergy Reports, 2024
- Aerodynamic performance and efficiency enhancement of a Savonius vertical axis wind turbine with Semi-Directional Curved Guide Vane, using CFD and optimization methodJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2024
- Parametric analysis of a helical-bladed vertical axis wind turbineJournal of Ocean Engineering and Marine Energy, 2024
- Investigation on harvesting characteristics of convective wind energy from vehicle driving on multi-lane highwayEnergy, 2022
- IoT for energy efficient green highway lighting systems: Challenges and issuesJournal of Network and Computer Applications, 2020
- A portable renewable wind energy harvesting system integrated S-rotor and H-rotor for self-powered applications in high-speed railway tunnelsEnergy Conversion and Management, 2019
- Effect analysis on power coefficient enhancement of a convective wind energy collecting device in the expresswayEnergy Conversion and Management, 2018
- Geometrical optimization of a swirling Savonius wind turbine using an open jet wind tunnelAlexandria Engineering Journal, 2016