Direct Tensile Behavior of Thermally Activated Concrete Reinforced with Short Iron-Based Shape Memory Alloy (Fe-SMA) Fibers: Experimental and Numerical Investigation
Open Access
Abstract
Short iron-based shape memory alloy (Fe-SMA) fibers can act as active internal reinforcement after thermal activation. This study examined the direct tensile behavior of concrete containing 2.0% by volume of straight Fe-SMA fibers, geometrically identical steel fibers, or no fibers. ASTM C307 briquettes were tested under ambient conditions and after a 150 min hold at a chamber temperature of 160 °C, followed by cooling. Plain-concrete flexural and compressive tests characterized matrix degradation. Mean tensile strengths were 7.96 and 7.18 MPa for the unheated steel-fiber and Fe-SMA groups, respectively. After heating, these values were 5.89 and 9.41 MPa. The Fe-SMA increase was 31.1%, corresponding to a mean difference of 2.23 MPa with a 95% confidence interval of 1.66–2.80 MPa. A three-dimensional ABAQUS/CAE model with randomly distributed, fully bonded fibers reproduced the main response features using a recovery-stress target adopted from prior same-batch characterization. Separate numerical sweeps predicted higher strength with increasing fiber content and decreasing diameter within the investigated ranges. These results support the feasibility of thermally activated short Fe-SMA reinforcement. The numerical recommendations remain conditional on the idealized interface, adopted activation model, and investigated parameter ranges. Direct core-temperature monitoring and microscopic interface characterization remain necessary for further validation.Keywords
All Related Versions
Funding Information
- Narodowym Centrum Nauki (2023/49/N/ST8/03063)
- Poznan University of Technology (0412/SBAD/0100)
This publication has 31 references indexed in Scilit:
- Shear strengthening of damaged reinforced concrete beams with iron-based shape memory alloy (Fe-SMA) strips: numerical and parametric analysisArchives of Civil and Mechanical Engineering, 2024
- From experimental testing to computational modeling: A review of shape memory alloy fiber-reinforced concrete compositesComposites Part B: Engineering, 2024
- Active action of prestressing on direct tensile behavior of mortar reinforced with NiTi SMA crimped fibersComposite Structures, 2022
- Direct procedure to characterize the tensile constitutive behavior of strain-softening and strain-hardening UHPFRCCement and Concrete Composites, 2021
- Flexural capacity and crack-closing performance of NiTi and NiTiNb shape-memory alloy fibers randomly distributed in mortar beamsComposites Part B: Engineering, 2018
- Crack-closing performance of NiTi and NiTiNb fibers in cement mortar beams using shape memory effectsComposite Structures, 2018
- Mechanical properties and numerical modeling of Fabric Reinforced Cementitious Matrix (FRCM) systems for strengthening of masonry structuresComposite Structures, 2014
- Direct assessment of tensile stress-crack opening behavior of Strain Hardening Cementitious Composites (SHCC)Cement and Concrete Research, 2012
- Feasibility of concrete prestressed by shape memory alloy short fibersMaterials and Structures, 2005
- A plastic-damage model for concreteInternational Journal of Solids and Structures, 1989