Abstract
This paper presents the design, production and usage of a practical, low-cost, low-profile pin-fed stacked rectangular patch antenna in through-the-wall imaging radar (TWIR). The proposed design consists of stacked V-shaped patches layered on top of each other to achieve ultra-wideband (UWB) operation and attain the required range resolution for TWIR. The antenna is designed for the $1.62-2.12 \text{GHz}$ band, enabling effective signal propagation through common building materials in TWIR applications. The antenna design and optimization were performed using CST Microwave Studio antenna design software. The prototype was fabricated on a plexiglass substrate $\left(\varepsilon_{\mathrm{r}}=2.6\right)$. Experimental evaluations of $\mathbf{S}_{11}$ demonstrate good agreement with simulated results, validating the proposed antenna design. Finally, the fabricated antennas were tested in a through-wall imaging scenario using a transmitter-receiver configuration. In this scenario, a person walking behind a wall was successfully detected, and associated movement and range location info were monitored in real time, demonstrating the antenna's effectiveness for TWIR applications.