Betül Yılmaz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Betül Yılmaz has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Caner Özdemir
Mersin Universitesi
12 shared publications - Hakan Işıker
Electrical & Electronics Engineering Department, Faculty of Engineering, Mersin University, P.O. Box 33343 Mersin, Turkey
6 shared publications - Sevket Demirci
Mersin University,Dept. of Electrical-Electronics Engin.,Mersin,Trkiye
4 shared publications Hakan Işıker
Mersin University,Electrical and Electronics Engineering Department,Mersin,Turkey
2 shared publicationsSevket Demirci
Department of Electrical and Electronics Engineering , 52983 Mersin University , Mersin , Türkiye
2 shared publicationsŞevket Demirci
2 shared publications
Latest Publications
- 8 September 2026
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 363 (15)
Design and realization of a low-cost, compact UHF V-slot stacked patch antenna for rubble-penetrating radar applications
- 8 September 2026
- Published by Elsevier in Journal of the Franklin Institute
- Vol. 363 (15)
Design and realization of a low-cost, compact UHF V-slot stacked patch antenna for rubble-penetrating radar applications
- 18 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 263-266
Preliminary Studies of Rubble Penetrating Radar Imaging at Mersin University for Detecting Individuals Trapped Under Debris
This study presents initiation studies on rubble penetrating radar (RPR) technology piloted at the Rubble Characterization Research and Application Laboratory at the Çiftlikköy Campus of Mersin University. The laboratory facility is introduced, and the experimental setup is presented. Real experiments for people under the debris are presented with the obtained detection two-dimensional (2D) range slow-time radar images. The constructed RPR images prove the success and validity of the proposed RPR approach in detection and locating the movement under the rubble.
- 18 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 263-266
Preliminary Studies of Rubble Penetrating Radar Imaging at Mersin University for Detecting Individuals Trapped Under Debris
This study presents initiation studies on rubble penetrating radar (RPR) technology piloted at the Rubble Characterization Research and Application Laboratory at the Çiftlikköy Campus of Mersin University. The laboratory facility is introduced, and the experimental setup is presented. Real experiments for people under the debris are presented with the obtained detection two-dimensional (2D) range slow-time radar images. The constructed RPR images prove the success and validity of the proposed RPR approach in detection and locating the movement under the rubble.
- 18 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 336-341
Comparative Study of Construction Materials in Türkiye via Hybrid Time-Gating Electromagnetic Attenuation Analysis
This study presents a comparative investigation into the electromagnetic attenuation characteristics of four construction materials extensively used in the Turkish building industry: C-30/37 reinforced concrete, aerated concrete, pumice block (Bims), and clay brick. Transmission-only ${S}_{{2 1}}$ measurements were conducted in the 0.8-2.8 GHz frequency band using a free-space setup with a Vector Network Analyzer (VNA). To overcome the limitations of finite measurement bandwidth and multipath reflections typical of outdoor experiments, a hybrid signal processing scheme is proposed. This method integrates raw time-domain analysis for qualitative assessment with a Gaussian-windowed time-gating technique for precise attenuation extraction. The results indicate significant variation in signal penetration, ranging from high-loss concrete $(\sim 80 ~\text{dB} / \mathrm{m})$ to low-loss clay brick $(<5 ~\text{dB} / \mathrm{m})$. These findings, validated against recent localized studies, provide critical data for outdoor propagation modeling and through-wall radar applications.- 18 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 336-341
Comparative Study of Construction Materials in Türkiye via Hybrid Time-Gating Electromagnetic Attenuation Analysis
This study presents a comparative investigation into the electromagnetic attenuation characteristics of four construction materials extensively used in the Turkish building industry: C-30/37 reinforced concrete, aerated concrete, pumice block (Bims), and clay brick. Transmission-only ${S}_{{2 1}}$ measurements were conducted in the 0.8-2.8 GHz frequency band using a free-space setup with a Vector Network Analyzer (VNA). To overcome the limitations of finite measurement bandwidth and multipath reflections typical of outdoor experiments, a hybrid signal processing scheme is proposed. This method integrates raw time-domain analysis for qualitative assessment with a Gaussian-windowed time-gating technique for precise attenuation extraction. The results indicate significant variation in signal penetration, ranging from high-loss concrete $(\sim 80 ~\text{dB} / \mathrm{m})$ to low-loss clay brick $(<5 ~\text{dB} / \mathrm{m})$. These findings, validated against recent localized studies, provide critical data for outdoor propagation modeling and through-wall radar applications.- 18 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 325-329
Investigation of Scattering Mechanisms Using GB-SAR Imaging and $H / \bar{\alpha}$ DecompositionPolarimetric backscattering characteristics of a low-vegetated land area containing a series of trees and bushes and reference targets including trihedral corner reflectors and metallic rods are investigated using ground-based synthetic aperture radar (GB-SAR) measurements and $\boldsymbol{H} / \overline{\boldsymbol{\alpha}}$ scattering decomposition technique. Two distinct frequency bands, a low-frequency band $(0.75-1.75 \text{GHz})$ and a high-frequency band $(2.25-3.25 \text{GHz})$ are considered to assess the influence of frequency/wavelength on the observed scattering mechanisms. The polarimetric entropy $H$, mean scattering angle $\overline{\boldsymbol{\alpha}}$, and $\boldsymbol{H} / \overline{\boldsymbol{\alpha}}$ classification images demonstrate that metallic reflectors and manmade structural elements exhibit pronounced changes in dominant scattering responses between frequency bands, while natural vegetated areas show frequency-dependent transitions between moderately random backscattering with double-bounce and dipole scattering contributions. These findings highlight the capability of polarimetric GB-SAR to capture wavelength-driven variations in scattering physics.- 18 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 325-329
Investigation of Scattering Mechanisms Using GB-SAR Imaging and $H / \bar{\alpha}$ DecompositionPolarimetric backscattering characteristics of a low-vegetated land area containing a series of trees and bushes and reference targets including trihedral corner reflectors and metallic rods are investigated using ground-based synthetic aperture radar (GB-SAR) measurements and $\boldsymbol{H} / \overline{\boldsymbol{\alpha}}$ scattering decomposition technique. Two distinct frequency bands, a low-frequency band $(0.75-1.75 \text{GHz})$ and a high-frequency band $(2.25-3.25 \text{GHz})$ are considered to assess the influence of frequency/wavelength on the observed scattering mechanisms. The polarimetric entropy $H$, mean scattering angle $\overline{\boldsymbol{\alpha}}$, and $\boldsymbol{H} / \overline{\boldsymbol{\alpha}}$ classification images demonstrate that metallic reflectors and manmade structural elements exhibit pronounced changes in dominant scattering responses between frequency bands, while natural vegetated areas show frequency-dependent transitions between moderately random backscattering with double-bounce and dipole scattering contributions. These findings highlight the capability of polarimetric GB-SAR to capture wavelength-driven variations in scattering physics.- 18 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 259-262
A Practical and Very Low-Cost V-Shaped Microstrip Patch Antenna for Through-The-Wall Imaging Radar Applications
This paper presents the design, production and usage of a practical, low-cost, low-profile pin-fed stacked rectangular patch antenna in through-the-wall imaging radar (TWIR). The proposed design consists of stacked V-shaped patches layered on top of each other to achieve ultra-wideband (UWB) operation and attain the required range resolution for TWIR. The antenna is designed for the $1.62-2.12 \text{GHz}$ band, enabling effective signal propagation through common building materials in TWIR applications. The antenna design and optimization were performed using CST Microwave Studio antenna design software. The prototype was fabricated on a plexiglass substrate $\left(\varepsilon_{\mathrm{r}}=2.6\right)$. Experimental evaluations of $\mathbf{S}_{11}$ demonstrate good agreement with simulated results, validating the proposed antenna design. Finally, the fabricated antennas were tested in a through-wall imaging scenario using a transmitter-receiver configuration. In this scenario, a person walking behind a wall was successfully detected, and associated movement and range location info were monitored in real time, demonstrating the antenna's effectiveness for TWIR applications.- 18 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 259-262
A Practical and Very Low-Cost V-Shaped Microstrip Patch Antenna for Through-The-Wall Imaging Radar Applications
This paper presents the design, production and usage of a practical, low-cost, low-profile pin-fed stacked rectangular patch antenna in through-the-wall imaging radar (TWIR). The proposed design consists of stacked V-shaped patches layered on top of each other to achieve ultra-wideband (UWB) operation and attain the required range resolution for TWIR. The antenna is designed for the $1.62-2.12 \text{GHz}$ band, enabling effective signal propagation through common building materials in TWIR applications. The antenna design and optimization were performed using CST Microwave Studio antenna design software. The prototype was fabricated on a plexiglass substrate $\left(\varepsilon_{\mathrm{r}}=2.6\right)$. Experimental evaluations of $\mathbf{S}_{11}$ demonstrate good agreement with simulated results, validating the proposed antenna design. Finally, the fabricated antennas were tested in a through-wall imaging scenario using a transmitter-receiver configuration. In this scenario, a person walking behind a wall was successfully detected, and associated movement and range location info were monitored in real time, demonstrating the antenna's effectiveness for TWIR applications.- 25 March 2026
- Published by Turkish Journal of Remote Sensing in Turkish Journal of Remote Sensing
- Vol. 8, 1-13
Availability and capabilities of ISAR imaging for detection and classification of UAV swarms: An illustrative study based on PREDICS Simulation and analysis
This paper presents a descriptive study on the capabilities of Inverse Synthetic Aperture Radar (ISAR) imaging to detect drone/ Unmanned Aerial Vehicle (UAV) swarms and classify the type and/or class of drone/UAV. The swarm structure consisted of 5 fixed-wing UAVs flying in coordination with each other. The X-band physical electromagnetic simulation of the scenario was carried out with PREDICS (Radar cross section simulator) solver. Full-polarization ISAR images were gathered via PREDICS to further investigate the physical features of the scene. It has been demonstrated that the use of ISAR polarimetry in identifying the key features of the platforms yielded various practices such that linear co-pol ISAR polarimetry could provide more generalized classifying features, whereas linear cross-pol ISAR polarimetry gave different sub-structures as seen from the ISAR images. As demonstrated with the circular ISAR images, the situation becomes reversed as the circular cross-pol ISAR images represent more key dominant scattering regions from the drone platforms. The Pauli ISAR image of the UAV swarm scenario provided abundant physical features of the UAV platform for fast and correct prediction of the model of the UAV that can be easily integrated into automatic target recognition schemes.
- 25 March 2026
- Published by Turkish Journal of Remote Sensing in Turkish Journal of Remote Sensing
- Vol. 8, 1-13
Availability and capabilities of ISAR imaging for detection and classification of UAV swarms: An illustrative study based on PREDICS Simulation and analysis
This paper presents a descriptive study on the capabilities of Inverse Synthetic Aperture Radar (ISAR) imaging to detect drone/ Unmanned Aerial Vehicle (UAV) swarms and classify the type and/or class of drone/UAV. The swarm structure consisted of 5 fixed-wing UAVs flying in coordination with each other. The X-band physical electromagnetic simulation of the scenario was carried out with PREDICS (Radar cross section simulator) solver. Full-polarization ISAR images were gathered via PREDICS to further investigate the physical features of the scene. It has been demonstrated that the use of ISAR polarimetry in identifying the key features of the platforms yielded various practices such that linear co-pol ISAR polarimetry could provide more generalized classifying features, whereas linear cross-pol ISAR polarimetry gave different sub-structures as seen from the ISAR images. As demonstrated with the circular ISAR images, the situation becomes reversed as the circular cross-pol ISAR images represent more key dominant scattering regions from the drone platforms. The Pauli ISAR image of the UAV swarm scenario provided abundant physical features of the UAV platform for fast and correct prediction of the model of the UAV that can be easily integrated into automatic target recognition schemes.
- 4 February 2026
- Published by Walter de Gruyter GmbH in Frequenz
- Vol. 80 (5-6) , 287-298
A practical approach for comparative assessment of electromagnetic attenuation in bulky materials using reflection-only measurements
A practical method for comparing the intrinsic electromagnetic attenuations of bulky materials has been introduced. This approach employs normal incidence reflection (S_11) only measurements of metal-backed walls constituted by building materials and relies on accurate processing of echoes from metal plates through a time gating algorithm. The resulting attenuation parameter α_diff reflects the difference in attenuation constants of two distinct materials per unit length. The technique has been validated using point scattering simulation and applied to 1–3 GHz real experimental data collected from two primary building materials: bims (or pumice) concrete and clay brick. The frequency variation of this relative measure has been evaluated, given the importance of understanding how these materials affect rubble-penetrating radar and other relevant applications.
- 4 February 2026
- Published by Walter de Gruyter GmbH in Frequenz
- Vol. 80 (5-6) , 287-298
A practical approach for comparative assessment of electromagnetic attenuation in bulky materials using reflection-only measurements
A practical method for comparing the intrinsic electromagnetic attenuations of bulky materials has been introduced. This approach employs normal incidence reflection (S_11) only measurements of metal-backed walls constituted by building materials and relies on accurate processing of echoes from metal plates through a time gating algorithm. The resulting attenuation parameter α_diff reflects the difference in attenuation constants of two distinct materials per unit length. The technique has been validated using point scattering simulation and applied to 1–3 GHz real experimental data collected from two primary building materials: bims (or pumice) concrete and clay brick. The frequency variation of this relative measure has been evaluated, given the importance of understanding how these materials affect rubble-penetrating radar and other relevant applications.
- 13 August 2025
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 67 (8)
Measurement and Analysis of Reflection Attenuation of Change Signals Traversing Concrete Barriers Within the 400–1400 MHz Range
The electromagnetic wave attenuation characteristics of two common construction materials, specifically C30/37 concrete and aerated‐concrete, namely C30/37 concrete and aerated concrete, have been investigated due to their importance in rubble‐penetrating radar‐based life‐sign detection. This paper presents the results from radar experiments using free‐space vector network analyzer measurements within the MHz frequency range, aimed at monitoring periodic arm movements behind wall blockages made of these materials. To ensure data validity, tests were carried out with two different antenna types: the Vivaldi tapered slot antenna and the double‐ridged horn antenna. The reflection data collected at a fixed sensor position were processed by eliminating the static background and averaging the results. The received power levels and frequency variations of the resultant change data were evaluated and compared in relation to the electromagnetic absorption characteristics of the examined concrete samples.
- 13 August 2025
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 67 (8)
Measurement and Analysis of Reflection Attenuation of Change Signals Traversing Concrete Barriers Within the 400–1400 MHz Range
The electromagnetic wave attenuation characteristics of two common construction materials, specifically C30/37 concrete and aerated‐concrete, namely C30/37 concrete and aerated concrete, have been investigated due to their importance in rubble‐penetrating radar‐based life‐sign detection. This paper presents the results from radar experiments using free‐space vector network analyzer measurements within the MHz frequency range, aimed at monitoring periodic arm movements behind wall blockages made of these materials. To ensure data validity, tests were carried out with two different antenna types: the Vivaldi tapered slot antenna and the double‐ridged horn antenna. The reflection data collected at a fixed sensor position were processed by eliminating the static background and averaging the results. The received power levels and frequency variations of the resultant change data were evaluated and compared in relation to the electromagnetic absorption characteristics of the examined concrete samples.
- Open Access
- 30 June 2025
- Published by Turkish Journal of Remote Sensing in Turkish Journal of Remote Sensing
- Vol. 7 (1) , 43-52
Design and performance enhancement of a modified corrugated Vivaldi micro-strip patch antenna for remote sensing applications
In this study, a practical modified corrugated Vivaldi micro-strip patch antenna (MC-VMSPA) is designed for the use of remote sensing applications such as through-wall radar applications. First, the basic design of Vivaldi micro-strip patch antenna (VMSPA) is optimized for the targeted band of frequencies of the through-wall radar applications. Then, a modified design that consists of a series of parasitic radiating patches on the substrate antenna is proposed to enhance the operational bandwidth of the radar and to attain the required directiveness with a practical gain value. The outcome after the design and the optimization of the proposed antenna is presented in comparison with the classical VMSPA. Analyzing the optimized design in terms of antenna parameters demonstrates the effectiveness and the availability of the designed MC-VMSPA for the use of remote sensing radar applications.
- 30 June 2025
- Published by Turkish Journal of Remote Sensing in Turkish Journal of Remote Sensing
- Vol. 7 (1) , 43-52
Open AccessDesign and performance enhancement of a modified corrugated Vivaldi micro-strip patch antenna for remote sensing applications
In this study, a practical modified corrugated Vivaldi micro-strip patch antenna (MC-VMSPA) is designed for the use of remote sensing applications such as through-wall radar applications. First, the basic design of Vivaldi micro-strip patch antenna (VMSPA) is optimized for the targeted band of frequencies of the through-wall radar applications. Then, a modified design that consists of a series of parasitic radiating patches on the substrate antenna is proposed to enhance the operational bandwidth of the radar and to attain the required directiveness with a practical gain value. The outcome after the design and the optimization of the proposed antenna is presented in comparison with the classical VMSPA. Analyzing the optimized design in terms of antenna parameters demonstrates the effectiveness and the availability of the designed MC-VMSPA for the use of remote sensing radar applications.
- 23 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-10
Clarification of Why Range-Doppler Algorithm Fails for SFCW Radars: Theoretical Analysis and Experimental Evaluation Using Real GB-SAR Data
In a recent study, we have reported a modified Range-Doppler Algorithm (RDA) for Synthetic Aperture Radar (SAR) imaging with Stepped-Frequency Continuous Wave (SFCW) illumination. In this paper, the theory behind this modified RDA, i.e., SFCW-RDA, is re-examined in detail to provide a better understanding of the origin of the SFCW-dependent defocusing terms of the conventional RDA. The range-azimuth coupling errors are evaluated, and the modifications to correct these errors are made in an alternative formulation of SFCW-RDA. To determine to what extent the original RDA fails in SFCW processing and to demonstrate the performance of the proposed algorithm, both the simulation and real data results are presented. A hypothetical SAR data composed of perfect point-scatterers are assumed in the simulation. Furthermore, ground-based SAR experimental data from a typical scene with manmade targets is used to evaluate the proposed technique. The corresponding SAR images of the conventional and the proposed RDA visually prove that the modified RDA can trustfully be used for the imaging of SFCW radar echoes.
- 23 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-10
Clarification of Why Range-Doppler Algorithm Fails for SFCW Radars: Theoretical Analysis and Experimental Evaluation Using Real GB-SAR Data
In a recent study, we have reported a modified Range-Doppler Algorithm (RDA) for Synthetic Aperture Radar (SAR) imaging with Stepped-Frequency Continuous Wave (SFCW) illumination. In this paper, the theory behind this modified RDA, i.e., SFCW-RDA, is re-examined in detail to provide a better understanding of the origin of the SFCW-dependent defocusing terms of the conventional RDA. The range-azimuth coupling errors are evaluated, and the modifications to correct these errors are made in an alternative formulation of SFCW-RDA. To determine to what extent the original RDA fails in SFCW processing and to demonstrate the performance of the proposed algorithm, both the simulation and real data results are presented. A hypothetical SAR data composed of perfect point-scatterers are assumed in the simulation. Furthermore, ground-based SAR experimental data from a typical scene with manmade targets is used to evaluate the proposed technique. The corresponding SAR images of the conventional and the proposed RDA visually prove that the modified RDA can trustfully be used for the imaging of SFCW radar echoes.