Influence of turning parameters on residual stresses and roughness of 42CrMo4 + QT
Open Access
- 27 August 2024
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 134 (5-6) , 2897-2919
Abstract
Residual stresses and surface roughness have been recognized to play a critical role in the fatigue strength of metal components. Machining processes can induce different roughness and residual stress conditions depending on the parameters used in the process. Therefore, it is essential to develop knowledge that helps to predict the residual stresses and roughness that would be obtained from different machining conditions. Due to the growing interest from the industry in the use of 42CrMo4 steel because of its excellent mechanical properties, the main objective of this work is to establish two phenomenological models to accurately predict the residual stress and roughness values in turned specimens of this material. The models are derived from data of four process variables: (a) insert tip radius; (b) feed rate; (c) cutting speed; and (d) depth of cut. For this purpose, a wide experimental campaign has been developed, which includes the machining of 68 specimens under various cutting scenarios, and their subsequent measurement of residual stresses and roughness. Once the experimental data were obtained, the response surface method based on the central composite design was used to fit the models, obtaining a correlation index $${R}^{2}$$ higher than 0.9 in both cases. In this article, it is concluded that feed rate and insert radius have a greater effect on the residual stress and roughness obtained, while cutting speed and depth of cut have a lesser impact on the results. It is hoped that the findings will establish a groundwork for the machining of this material type, ensuring controlled conditions of residual stress and roughness.
Keywords
All Related Versions
Funding Information
- Universidad de Oviedo (UNOV-22-RLD-UE-5)
- Agencia Estatal de Investigación (TED2021-130306B-100, PID2021-124245OA-I00)
- Eusko Jaurlaritza (PIBA 2023/1/0052)
- Grantová Agentura České Republiky (23-06130K)
- Universidad de Oviedo
This publication has 21 references indexed in Scilit:
- Optimization of shot-peening parameters for steel AISI 316L via response surface methodology (RSM): introducing two novel mechanical aspectsThe International Journal of Advanced Manufacturing Technology, 2024
- Investigation of the size effect on 42CrMo4 + QT steel in the high-cycle fatigue domain part I: Experimental campaignInternational Journal of Fatigue, 2023
- Fatigue limit estimation for carburized steels with surface compressive residual stress considering residual stress relaxationInternational Journal of Fatigue, 2022
- A comprehensive review on residual stresses in turningAdvances in Manufacturing, 2021
- Isothermal low-cycle fatigue and fatigue-creep of a 42CrMo4 steelInternational Journal of Fatigue, 2020
- Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression methodExpert Systems with Applications, 2011
- The effect of machining on the surface integrity and fatigue lifeInternational Journal of Fatigue, 2008
- Application of response surface methodology in the optimization of cutting conditions for surface roughnessJournal of Materials Processing Technology, 2005
- Residual stresses in turningJournal of Materials Processing Technology, 2005
- Analysis of surface roughness using confocal microscopyJournal of Materials Science, 1993