Ion beam shaping and figuring of X-ray sub-microfocusing mirrors
- 17 February 2026
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (4) , 6663-6676
Abstract
High-performance synchrotron X-ray focusing mirrors require aspheric surfaces with nanoradian slope accuracy, which are challenging to provide for many manufacturers. Conventional grinding and polishing techniques typically introduce tooling marks to the surface during the fabrication process, and these marks can impose significant challenges for the deterministic figuring processes used as the final step in mirror fabrication, ultimately limiting the slope errors of the mirrors. To overcome this limitation, we present an alternative approach by using ion beam shaping to form an elliptical sub-microfocusing mirror from a flat mirror, followed by ion beam figuring to improve the remaining errors. Two mirrors fabricated using this approach achieved tangential slope errors below 200 nrad root mean squared (rms), in contrast to a conventionally pre-shaped mirror with identical ellipse parameters that was limited to > 500 nrad rms after ion beam figuring due to residual tooling marks. In X-ray focusing tests, the ion beam shaped mirrors are able to realise a spot size below 250 nm (full width half maximum), compared to 404 nm for the pre-shaped mirror. This demonstrates the excellent potential of ion beam shaping as a method for rapid, efficient and high-quality X-ray mirror fabrication.Keywords
This publication has 35 references indexed in Scilit:
- Ion Beam Figuring System for Synchrotron X-Ray Mirrors Achieving Sub-0.2-µrad and Sub-0.5-nm Root Mean SquareNanomanufacturing and Metrology, 2023
- A Fizeau interferometry stitching system to characterize X-ray mirrors with sub-nanometre errorsOptics and Lasers in Engineering, 2022
- High-performance facility and techniques for high-precision machining of optical components by ion beamsPrecision Engineering, 2017
- Ion beam etching of a flat silicon mirror surface: A study of the shape error evolutionNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2013
- Super-smooth finishing of diamond turned hard X-ray molding dies by combined fluid jet and bonnet polishingCIRP Annals, 2013
- Ultra-precision surface finishing by ion beam and plasma jet techniques—status and outlookNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2010
- Ion beam profiling of aspherical X-ray mirrorsNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2010
- Fabrication of X-ray mirrors for synchrotron applicationsNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2010
- Evolution of surface roughness in silicon X-ray mirrors exposed to a low-energy ion beamNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2010
- Ion beam assisted smoothing of optical surfacesApplied Physics A, 2004