Influence of the Preheat Temperature and Withdrawal Rate on the Microstructure of Ceramic-Cored Ds MAR-M247 Nickel-Based Superalloy
Open Access
- 5 March 2026
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1181, 19-24
Abstract
The research focuses on cored blades made from the MAR-M247® Ni-based superalloy, which were manufactured through directional solidification with varying withdrawal rates of either 3.4 mm/min or 5.0 mm/min, and shell mold temperatures of 1510 °C or 1566 °C after undergoing solution heat treatment. The characterization of four variants of the cored blades was conducted using several analytical techniques: X-ray diffraction (XRD), light microscopy (LM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The XRD analysis identified the presence of the γ matrix, the intermetallic γ' phase, MC carbides, and M 5 B 3 phases. The dendritic regions of the cored blades consist of secondary γ' precipitates surrounded by a γ matrix, with a mean size ranging from 0.264 to 0.272 μm, depending on the fabrication parameters.Keywords
This publication has 5 references indexed in Scilit:
- Al- and Ta-Modified Alloy 740 Superalloy Castings Produced in Non-vacuum Conditions—Microstructure and Selected PropertiesMetallurgical and Materials Transactions A, 2024
- Directional Solidification of Single-Crystal Blades in Industrial Conditions Using the Developed Gas Cooling Casting MethodMetallurgical and Materials Transactions A, 2024
- Silica-based ceramic cores for high-pressure turbine airfoil blades in aircraft enginesProcessing and Application of Ceramics, 2024
- The effect of additives on properties of silica-based ceramic cores utilised in fabrication of multivane clusters for turbofan jet engineCeramics International, 2022
- Creep characteristics of directionally solidified turbine blades based on the difference in original casting characteristicsJournal of Alloys and Compounds, 2021