Effect of Sodium Sulfate on the Viscosity, Tack, and Adhesion Properties of SMR 10-based Pressure-sensitive Adhesive
Authors:
- 8 September 2010
- journal article
- research article
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 43 (1) , 85-95
Abstract
The effect of sodium sulfate as filler on viscosity, tack, and adhesion properties of Standard Malaysian Rubber (SMR 10)-based pressure-sensitive adhesive were studied. Coumarone-indene resin and toluene were used as the tackifier and solvent respectively throughout the experiment. The results show that viscosity of adhesive increases with addition of sodium sulfate. For rolling ball tack test, the distance traveled by rolling ball decreases with increasing sodium sulfate concentration indicating the increase of tack value with sodium sulfate. The distance traveled by the rolling ball decreases with coating thickness of adhesive. For cross-hatch adhesion test, result shows that maximum adhesion occurs between 30 and 40 parts per hundred parts of rubber (phr) of sodium sulfate content, an observation which is attributed to the maximum of wettability of adhesive. The 60 μm of adhesive coating thickness shows good performance of adhesion property of SMR 10-based pressure-sensitive adhesive.Keywords
This publication has 22 references indexed in Scilit:
- Viscosity and Peel Strength of Magnesium Oxide-Filled Adhesive Prepared from Epoxidized Natural Rubber (ENR 25)Polymer-Plastics Technology and Engineering, 2010
- Effect of molecular weight of epoxidized‐natural rubber on viscosity and tack of pressure‐sensitive adhesivesJournal of Applied Polymer Science, 2009
- Effect of molecular weight of epoxidized natural rubber on shear strength of adhesivesJournal of Applied Polymer Science, 2009
- Effect of Kaolin on Adhesion Property of Epoxidized Natural Rubber-based Pressure-sensitive Adhesive Using Gum Rosin as the TackifierJournal of Elastomers & Plastics, 2009
- Dependence of Peel Adhesion on Molecular Weight of Epoxidized Natural RubberThe Journal of Adhesion, 2009
- Adhesion properties of pressure‐sensitive adhesives prepared from SMR 10/ENR 25, SMR 10/ENR 50, and ENR 25/ENR 50 blendsJournal of Applied Polymer Science, 2008
- Effect of zinc oxide on the viscosity, tack, and peel strength of ENR 25‐based pressure‐sensitive adhesivesJournal of Applied Polymer Science, 2007
- Mooney scorch time and cure index of epoxidized natural rubber in presence of sodium carbonateJournal of Applied Polymer Science, 2001
- Concentration effect of stearic acid on scorch behavior of epoxidized natural rubberJournal of Applied Polymer Science, 1995
- Mooney scorch time of epoxidized natural rubberJournal of Applied Polymer Science, 1991