The Influence of KCl and HCl on the High-Temperature Oxidation of a Fe-2.25Cr-1Mo Steel at 400 °C
Open Access
- 11 November 2019
- journal article
- research article
- Published by Springer Nature in Oxidation of Metals
- Vol. 93 (1-2) , 29-52
Abstract
The influence of alkali- and chlorine-containing compounds on the corrosion of superheater alloys has been studied extensively. The current paper instead investigates the corrosive effects of KCl and HCl under conditions relevant to waterwall conditions. A low-alloy (Fe-2.25Cr-1Mo) steel was exposed to KCl(s), 500 vppm HCl(g) and (KCl + HCl) in the presence of 5%O2and 20% H2O at 400 °C. The results indicate that alloy chlorination by KCl occurs by an electrochemical process, involving cathodic formation of chemisorbed KOH on the scale surface and anodic formation of solid FeCl2at the bottom of the scale. The process is accompanied by extensive cracking and delamination of the iron oxide scale, resulting in a complex, convoluted scale morphology. Adding 500 vppm HCl to the experimental environment (KCl + HCl) initially greatly accelerated the formation of FeCl2at the scale/alloy interface. The accelerated alloy chlorination is attributed to HCl reacting with KOH at the scale surface, causing the cathodic process to be depolarized. A rapid slowing down of the rate of chlorination and corrosion in KCl + HCl environment was observed which was attributed to the electronically insulating nature of the FeCl2layer which forms at the bottom of the scale, disconnecting the anodic and cathodic regions.Keywords
Funding Information
- The Swedish High Temperature Corrosion Centre
This publication has 33 references indexed in Scilit:
- The influence of small amounts of KCl(s) on the high temperature corrosion of a Fe‐2.25Cr‐1Mo steel at 400 and 500°CMaterials and Corrosion, 2010
- Initial Stages of the HCl-Induced High-Temperature Corrosion of Alloy 310Journal of the Electrochemical Society, 2007
- The Influence of Sulfur Additions on the Corrosive Environments in a Waste-Fired CFB BoilerMaterials Science Forum, 2006
- Local reactions of KCl particles with iron, nickel and chromium surfacesMaterials and Corrosion, 2006
- Utilizing biomass and waste for power production—a decade of contributing to the understanding, interpretation and analysis of deposits and corrosion productsFuel, 2005
- Energetics of Potassium Loss from Styrene Catalyst Model Components: Reassignment of K Storage and Release PhasesJournal of Catalysis, 2002
- On the preparation and composition of potassium promoted iron oxide model catalyst filmsPhysical Chemistry Chemical Physics, 2001
- Corrosion of High Alloy Steels and Fe-Cr-Alloys Beneath Deposits from Waste Incinerator PlantsMaterials Science Forum, 1997
- The nature of the iron oxide-based catalyst for dehydrogenation of ethylbenzene to styrene I. Solid-state chemistry and bulk characterizationJournal of Catalysis, 1990
- Ion Exchange in Alkali Layers of Potassium β ‐Ferrite ((1 + x)K 2 O · 11Fe 2 O 3 ) Single CrystalsJournal of the American Ceramic Society, 1987