Jan-Erik Svensson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jan-Erik Svensson has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Jan Froitzheim
Chalmers University of Technology, Department of Chemistry and Chemical Engineering: Energy and Materials, SE—412 96 Göteborg, Sweden
6 shared publications - Claudia Goebel
Chalmers University of Technology
2 shared publications - Matthieu Tomas
Chemistry and Chemical Engineering, Chalmers University of Technology, Kemivägen 10, 41296, Gothenburg, Sweden
2 shared publications - Alberto Visibile
Chalmers University of Technology, Department of Chemistry and Chemical Engineering, 41296 Gothenburg, Sweden
1 shared publication - Amanda Persdotter
Department of Mechanical Engineering Chalmers University of Technology Göteborg Sweden
1 shared publication - Anna Magrasó
Department of Chemistry, University of Oslo, FERMiO/SMN, NO-0349 Oslo, Norway
1 shared publication
Latest Publications
- Open Access
- 30 January 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 58, 852-862
Hydrogen-barrier coatings against dual-atmosphere corrosion for IT-SOFC interconnect applications
- 30 January 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 58, 852-862
Open AccessHydrogen-barrier coatings against dual-atmosphere corrosion for IT-SOFC interconnect applications
- Open Access
- 14 February 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (48) , 18405-18419
Novel coatings for protecting solid oxide fuel cell interconnects against the dual-atmosphere effect
- 14 February 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (48) , 18405-18419
Open AccessNovel coatings for protecting solid oxide fuel cell interconnects against the dual-atmosphere effect
- Open Access
- 1 December 2021
- Published by Elsevier in Surface and Coatings Technology
- Vol. 428, 127894
Self-healing properties of Ce/Co-coated stainless steel under simulated intermediate temperature solid oxide fuel cell conditions
- 1 December 2021
- Published by Elsevier in Surface and Coatings Technology
- Vol. 428, 127894
Open AccessSelf-healing properties of Ce/Co-coated stainless steel under simulated intermediate temperature solid oxide fuel cell conditions
- Open Access
- 11 November 2019
- Published by Springer Nature in Oxidation of Metals
- Vol. 93 (1-2) , 29-52
The Influence of KCl and HCl on the High-Temperature Oxidation of a Fe-2.25Cr-1Mo Steel at 400 °C
The influence of alkali- and chlorine-containing compounds on the corrosion of superheater alloys has been studied extensively. The current paper instead investigates the corrosive effects of KCl and HCl under conditions relevant to waterwall conditions. A low-alloy (Fe-2.25Cr-1Mo) steel was exposed to KCl(s), 500 vppm HCl(g) and (KCl + HCl) in the presence of 5%O2and 20% H2O at 400 °C. The results indicate that alloy chlorination by KCl occurs by an electrochemical process, involving cathodic formation of chemisorbed KOH on the scale surface and anodic formation of solid FeCl2at the bottom of the scale. The process is accompanied by extensive cracking and delamination of the iron oxide scale, resulting in a complex, convoluted scale morphology. Adding 500 vppm HCl to the experimental environment (KCl + HCl) initially greatly accelerated the formation of FeCl2at the scale/alloy interface. The accelerated alloy chlorination is attributed to HCl reacting with KOH at the scale surface, causing the cathodic process to be depolarized. A rapid slowing down of the rate of chlorination and corrosion in KCl + HCl environment was observed which was attributed to the electronically insulating nature of the FeCl2layer which forms at the bottom of the scale, disconnecting the anodic and cathodic regions.
- 11 November 2019
- Published by Springer Nature in Oxidation of Metals
- Vol. 93 (1-2) , 29-52
Open AccessThe Influence of KCl and HCl on the High-Temperature Oxidation of a Fe-2.25Cr-1Mo Steel at 400 °C
The influence of alkali- and chlorine-containing compounds on the corrosion of superheater alloys has been studied extensively. The current paper instead investigates the corrosive effects of KCl and HCl under conditions relevant to waterwall conditions. A low-alloy (Fe-2.25Cr-1Mo) steel was exposed to KCl(s), 500 vppm HCl(g) and (KCl + HCl) in the presence of 5%O2and 20% H2O at 400 °C. The results indicate that alloy chlorination by KCl occurs by an electrochemical process, involving cathodic formation of chemisorbed KOH on the scale surface and anodic formation of solid FeCl2at the bottom of the scale. The process is accompanied by extensive cracking and delamination of the iron oxide scale, resulting in a complex, convoluted scale morphology. Adding 500 vppm HCl to the experimental environment (KCl + HCl) initially greatly accelerated the formation of FeCl2at the scale/alloy interface. The accelerated alloy chlorination is attributed to HCl reacting with KOH at the scale surface, causing the cathodic process to be depolarized. A rapid slowing down of the rate of chlorination and corrosion in KCl + HCl environment was observed which was attributed to the electronically insulating nature of the FeCl2layer which forms at the bottom of the scale, disconnecting the anodic and cathodic regions.
- Open Access
- 1 August 2018
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 43 (31) , 14665-14674
The effect of pre-oxidation parameters on the corrosion behavior of AISI 441 in dual atmosphere
- 1 August 2018
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 43 (31) , 14665-14674
Open AccessThe effect of pre-oxidation parameters on the corrosion behavior of AISI 441 in dual atmosphere
- 1 September 2016
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2016-02 (11) , 1221
Nitridation of a Fecral Alloy in H2+N2 Environment at 900oc: A Microstructural Study
When exposed to O2 and/or H2O at high temperature, iron-chromium-aluminum (FeCrAl) alloys form an adherent a-Al2O3 scale that grows very slowly. Because of the excellent protective properties of this scale, the FeCrAls resist high temperature corrosion and oxidation very well and they are used in a wide range of high temperature applications up to 1300oC. However, when exposed to nitrogen-containing environments with low oxygen activity, e.g. H2+N2 mixtures, the FeCrAls become sensitive to nitridation. Such environments are often used in heat treating and sintering operations. This paper investigates the nitridation behavior of the FeCrAl alloy Kanthal APMT at 900°C. In order to provoke nitridation, the material was exposed to a N2+H2 mixture with very low water vapour content. Microstructural analyses after 24h exposure revealed that a continuous Al2O3 scale covered almost all of the alloy surface. However, the oxide scale contained a distribution of Cr2O3 patches with diameters of 10-40 mm. Cross-sectional studies using Focused Ion Beam (FIB) milling showed internal nitridation of the alloy, displaying a variety of precipitates below the Cr2O3 patches, including needle shaped AlN, equiaxed Cr2N and CrN particles. In contrast, the alloy beneath the Al2O3 scale was not nitrided. To investigate possible reasons for the formation of chromia patches we kept track of specific regions before and after exposure. Hence, several analytical techniques were employed to fully characterize the alloy microstructure prior to the exposures, using Scanning Electron Microscopy (SEM), Electron Backscatter Diffraction (EBSD) and Energy Dispersive X-ray (EDX) analysis. Some markers were used to enable identification of specific areas during post-exposure analysis and to enable correlation of chromia formation and internal nitridation with the alloy microstructure.
- 1 September 2016
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2016-02 (11) , 1221
Nitridation of a Fecral Alloy in H2+N2 Environment at 900oc: A Microstructural Study
When exposed to O2 and/or H2O at high temperature, iron-chromium-aluminum (FeCrAl) alloys form an adherent a-Al2O3 scale that grows very slowly. Because of the excellent protective properties of this scale, the FeCrAls resist high temperature corrosion and oxidation very well and they are used in a wide range of high temperature applications up to 1300oC. However, when exposed to nitrogen-containing environments with low oxygen activity, e.g. H2+N2 mixtures, the FeCrAls become sensitive to nitridation. Such environments are often used in heat treating and sintering operations. This paper investigates the nitridation behavior of the FeCrAl alloy Kanthal APMT at 900°C. In order to provoke nitridation, the material was exposed to a N2+H2 mixture with very low water vapour content. Microstructural analyses after 24h exposure revealed that a continuous Al2O3 scale covered almost all of the alloy surface. However, the oxide scale contained a distribution of Cr2O3 patches with diameters of 10-40 mm. Cross-sectional studies using Focused Ion Beam (FIB) milling showed internal nitridation of the alloy, displaying a variety of precipitates below the Cr2O3 patches, including needle shaped AlN, equiaxed Cr2N and CrN particles. In contrast, the alloy beneath the Al2O3 scale was not nitrided. To investigate possible reasons for the formation of chromia patches we kept track of specific regions before and after exposure. Hence, several analytical techniques were employed to fully characterize the alloy microstructure prior to the exposures, using Scanning Electron Microscopy (SEM), Electron Backscatter Diffraction (EBSD) and Energy Dispersive X-ray (EDX) analysis. Some markers were used to enable identification of specific areas during post-exposure analysis and to enable correlation of chromia formation and internal nitridation with the alloy microstructure.
- 6 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 57 (1) , 2187-2193
Nano Coated Interconnects for SOFC (NaCoSOFC)
The NaCoSOFC project is focused on the development of nano coatings for SOFC interconnects. The project is sponsored by the Nordic Top Level Research Initiative and has four project partners: Sandvik Materials Technology which is producing coated interconnects, Chalmers University of Technology and the University of Oslo that characterize samples with respect to e.g. corrosion, Cr evaporation and ASR as well as Topsoe Fuel Cell that is testing the developed interconnects in its stacks. The developed coatings are based on a combination of Co with RE elements and exhibit high corrosion resistance, 10 fold decrease in Cr evaporation and ASR values that are approximately 50% of the uncoated material.
- 6 October 2013
- Published by The Electrochemical Society in ECS Transactions
- Vol. 57 (1) , 2187-2193
Nano Coated Interconnects for SOFC (NaCoSOFC)
The NaCoSOFC project is focused on the development of nano coatings for SOFC interconnects. The project is sponsored by the Nordic Top Level Research Initiative and has four project partners: Sandvik Materials Technology which is producing coated interconnects, Chalmers University of Technology and the University of Oslo that characterize samples with respect to e.g. corrosion, Cr evaporation and ASR as well as Topsoe Fuel Cell that is testing the developed interconnects in its stacks. The developed coatings are based on a combination of Co with RE elements and exhibit high corrosion resistance, 10 fold decrease in Cr evaporation and ASR values that are approximately 50% of the uncoated material.
- 25 April 2011
- Published by The Electrochemical Society in ECS Transactions
- Vol. 35 (1) , 2503-2508
Multifunctional Nano-Coatings for SOFC Interconnects
Chromium evaporation from metallic interconnects in SOFCs is commonly poisoning the cathode of SOFCs. To reduce chromium evaporation, rather thick coatings have been deposited using various coating techniques. In this study a 22% Cr ferritic steel has been coated with multilayered nano coatings. The best coatings combine a Cr retention layer (800nm Co) with a 10nm layer of Ce that reduces the corrosion rate of the metallic interconnect. Such coatings might be a cost efficient way to meet the required lifetime targets for SOFC interconnects. The Cr evaporation measurements are carried out with a recently developed denuder technique which allows time resolved quantification of volatile chromium species. Downstream of the samples a denuder tube is placed which collects any CrO2(OH)2 evaporating from the samples.
- 25 April 2011
- Published by The Electrochemical Society in ECS Transactions
- Vol. 35 (1) , 2503-2508
Multifunctional Nano-Coatings for SOFC Interconnects
Chromium evaporation from metallic interconnects in SOFCs is commonly poisoning the cathode of SOFCs. To reduce chromium evaporation, rather thick coatings have been deposited using various coating techniques. In this study a 22% Cr ferritic steel has been coated with multilayered nano coatings. The best coatings combine a Cr retention layer (800nm Co) with a 10nm layer of Ce that reduces the corrosion rate of the metallic interconnect. Such coatings might be a cost efficient way to meet the required lifetime targets for SOFC interconnects. The Cr evaporation measurements are carried out with a recently developed denuder technique which allows time resolved quantification of volatile chromium species. Downstream of the samples a denuder tube is placed which collects any CrO2(OH)2 evaporating from the samples.
- 1 January 2003
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 150 (12) , B583-B588
The Influence of NaNO[sub 3] on the Atmospheric Corrosion of Zinc
The influence of NaNO3NaNO3 salt deposits on the atmospheric corrosion of zinc in humid air has been studied. Comparisons are made with the effects of NaCl and Na2SO4.Na2SO4. Also the combined effect of NaNO3NaNO3 with NaCl or Na2SO4Na2SO4 was investigated. The salts were applied to zinc samples prior to exposure. The samples were exposed to purified humid air with careful control of relative humidity (95%), temperature (22.0°C), and flow conditions. The CO2CO2 concentration was 350 ppm and the exposure time was 4 weeks. Mass gain and metal loss results are reported. The corrosion products were analyzed by gravimetry, ion chromatography, and X-ray diffraction. Results show that the corrosion rate in the presence of NaNO3NaNO3 is only a third of that registered in the presence of NaCl and Na2SO4.Na2SO4. Further, a slight inhibitive effect of NaNO3NaNO3 was found in the presence of NaCl or Na2SO4.Na2SO4. The decreased corrosion rate in the presence of NaNO3NaNO3 was attributed to the reduction of nitrate to nitrite at the zinc surface. Nitrite is suggested to act as a corrosion inhibitor toward zinc. © 2003 The Electrochemical Society. All rights reserved.
- 1 January 2003
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 150 (12) , B583-B588
The Influence of NaNO[sub 3] on the Atmospheric Corrosion of Zinc
The influence of NaNO3NaNO3 salt deposits on the atmospheric corrosion of zinc in humid air has been studied. Comparisons are made with the effects of NaCl and Na2SO4.Na2SO4. Also the combined effect of NaNO3NaNO3 with NaCl or Na2SO4Na2SO4 was investigated. The salts were applied to zinc samples prior to exposure. The samples were exposed to purified humid air with careful control of relative humidity (95%), temperature (22.0°C), and flow conditions. The CO2CO2 concentration was 350 ppm and the exposure time was 4 weeks. Mass gain and metal loss results are reported. The corrosion products were analyzed by gravimetry, ion chromatography, and X-ray diffraction. Results show that the corrosion rate in the presence of NaNO3NaNO3 is only a third of that registered in the presence of NaCl and Na2SO4.Na2SO4. Further, a slight inhibitive effect of NaNO3NaNO3 was found in the presence of NaCl or Na2SO4.Na2SO4. The decreased corrosion rate in the presence of NaNO3NaNO3 was attributed to the reduction of nitrate to nitrite at the zinc surface. Nitrite is suggested to act as a corrosion inhibitor toward zinc. © 2003 The Electrochemical Society. All rights reserved.