Assessing parameters impact in dropwise condensation heat transfer for an individual droplet on inclined/grooved surfaces: a sobol sensitivity analysis
Authors:
Open Access
- 28 November 2025
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 42650
Abstract
Dropwise condensation (DWC) heat transfer models, at the level of individual liquid droplets, supply insights on a scientific basis for improving condensation processes. Therefore, heat transfer rates and parameters controlling these should be measured correctly. This investigation examined four distinct scenarios to assess parameter sensitivities. The analysis quantified the relative contributions of key variables to average heat flux and temperature distribution using Sobol’s sensitivity indices, specifically evaluating inclination angles, roughness index, contact angle, Nusselt (\(\:Nu\)) number, droplet height, and saturation temperatures. The study employed Design-Expert software to execute Response Surface Methodology (RSM), utilizing its regression approach and analysis of variance (ANOVA) capabilities to statistically validate the developed models and their constituent terms. Also, the sensitivity analysis was carried out employing the UQLab computational framework, which provides advanced capabilities for uncertainty quantification and global sensitivity analysis. Moreover, Sobol indices were computed utilizing two estimators with 95% confidence intervals from 1000 bootstrap resamples. Sensitivity analysis demonstrates that in general, the DWC heat transfer model is fairly highly sensitive to saturation temperature,\(\:\:Nu\) number, and inclination angle. Furthermore, for rough surfaces, contact angle and saturation temperature dominate the impact on model predictions. Besides, the average heat flux and temperature distribution demonstrate significantly higher sensitivity to the \(\:Nu\) number and saturation temperature, respectively compared to the other input parameters as evidenced by Sobol’ sensitivity indices. Based on the outcomes, employing Janon estimator the maximum total effect Sobol’ indices for scenarios of 1 and 4 are 99.22% and 92.7%, respectively. Such information is crucial in guiding the effort toward parameter accuracy in experimental characterization and computational modeling of DWC mechanisms.
Keywords
All Related Versions
This publication has 46 references indexed in Scilit:
- Dynamic omniphobic surfaces enable the stable dropwise condensation of completely wetting refrigerantsNature Communications, 2025
- The influence of Nusselt number on dropwise condensation heat transfer for a single droplet on inclined and grooved surfacesScientific Reports, 2025
- Numerical scrutinization of dropwise condensation heat transfer on an inclined surfaceHeat Transfer, 2022
- Improving heat and mass transfer rates through continuous drop-wise condensationScientific Reports, 2021
- Enhanced condensation heat transfer using porous silica inverse opal coatings on copper tubesScientific Reports, 2021
- Modeling and Simulation of Dropwise Condensation: A ReviewJournal of the Indian Institute of Science, 2019
- Modeling of heat transfer through a liquid dropletHeat and Mass Transfer, 2018
- Heat Transfer through a Condensate Droplet on Hydrophobic and Nanostructured Superhydrophobic SurfacesLangmuir, 2016
- Dropwise Condensation of Low Surface Tension Fluids on Omniphobic SurfacesScientific Reports, 2014
- Importance measures in global sensitivity analysis of nonlinear modelsReliability Engineering & System Safety, 1996