A nanopower, high PSRR full CMOS voltage reference circuit consisting of subthreshold MOSFETs
Authors:
- 1 November 2015
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
A sub-1-V nanopower full CMOS voltage reference circuit was proposed in TSMC 0.18μm CMOS process in this paper. The circuit consists of a self-regulating technique circuit, a proportional to absolute temperature (PTAT) current circuit and active load circuit. In order to reduce power consumption and save area of the chip, the proposed circuit contains only MOSFETs, avoiding the use of resistors. Cadence Spectre simulation results show that the temperature coefficient of the output voltage was 66.9 ppm/°C in a range from -40 to 120°C, and the line sensitivity was 197.5 ppm/V in a supply voltage range of 1-3 V Meanwhile, the power supply rejection ratio (PSRR) of the voltage reference achieved -93.22 dB@DC and -15.45 dB@10MHz, and the proposed circuit merely consumed 0.23 μW of power at room temperature. Our proposed circuit would be suitable for use in subthreshold-operated and power-sensitive large scale integrated circuit.Keywords
This publication has 6 references indexed in Scilit:
- A 490-nA, 43-ppm/°C, sub-0.8-V supply voltage reference2014
- A Novel 1.2–V 4.5-ppm/°C Curvature-Compensated CMOS Bandgap ReferenceIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- A low-voltage, low-power subthreshold CMOS voltage reference without resistors and high threshold voltage devices2012
- A 300 nW, 15 ppm/$^{\circ}$C, 20 ppm/V CMOS Voltage Reference Circuit Consisting of Subthreshold MOSFETsIEEE Journal of Solid-State Circuits, 2009
- Tradeoffs and Optimization in Analog CMOS Design2008
- A Simple Subthreshold CMOS Voltage Reference Circuit With Channel- Length Modulation CompensationIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2006