Investigation of curing and thermal behavior of benzoxazine and lignin mixtures
- 17 January 2012
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 125 (3) , 1773-1781
Abstract
This article describes the synthesis and characterization of two types of benzoxazine monomers based on phenol or bisphenol, aniline, and formaldehyde. Their characterization was achieved by Fourier transform infrared, 1H‐nuclear magnetic resonance, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Lignin polymer was characterized by infrared, DSC, and TGA. The curing behavior of mixtures of benzoxazine monomers and lignin was investigated by DSC. The mass ratios of benzoxazine monomers/lignin of a series of samples were 100 : 0, 95 : 05, 90 : 10, 85 : 15, 80 : 20, 75 : 25, and 70 : 30. The results indicate that the maximum curing temperatures of the mixtures were lower than that of the pure benzoxazine monomers, and that they decreased with increasing contents of lignin in the mixture. The heat of polymerization (ΔH) of the benzoxazine monomers and lignin mixtures as a function of the mass ratio and the structure of the benzoxazine monomers shows no definite trend. The samples were cured according to the following conditions: 170°C/2h + 200°C/2h and analyzed by DSC and TGA. In all the samples, the glass transition temperature of the benzoxazines increased upon mixing with increasing amounts of lignin. The changes may be due to the formation of a more compact network structure in the mixtures. The thermal stability of the isothermally cured resins is found to be dependent on the mass ratio of benzoxazine/lignin and structure of the benzoxazine monomers. The more lignin in the mixture, the higher is the char yield in the mixture. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012Keywords
This publication has 17 references indexed in Scilit:
- Properties of sodium lignosulfonate as dispersant of coal water slurryEnergy Conversion and Management, 2007
- Studies on curing and thermal behavior of diglycidyl ether of bisphenol‐A and benzoxazine mixturesJournal of Applied Polymer Science, 2007
- Physico-chemical characterization of lignins from different sources for use in phenol–formaldehyde resin synthesisBioresource Technology, 2007
- Comparative Evaluation of Three Lignin Isolation Protocols for Various Wood SpeciesJournal of Agricultural and Food Chemistry, 2006
- Poly(Ethylene Oxide)/Organosolv Lignin Blends: Relationship between Thermal Properties, Chemical Structure, and Blend BehaviorMacromolecules, 2004
- Synthesis and characterization of benzoxazine‐based phenolic resins: Crosslinking studyJournal of Applied Polymer Science, 2003
- Development of low‐viscosity benzoxazine resins and their polymersJournal of Applied Polymer Science, 2002
- Cationic ring-opening polymerization of benzoxazinesPolymer, 1999
- 1,3,5-Triphenylhexahydro-1,3,5-triazine - active intermediate and precursor in the novel synthesis of benzoxazine monomers and oligomersMacromolecular Chemistry and Physics, 1999
- Phenolic materials via ring‐opening polymerization: Synthesis and characterization of bisphenol‐A based benzoxazines and their polymersJournal of Polymer Science Part A: Polymer Chemistry, 1994