Numerical investigation of interaction between internal mixing air and spray of three kinds of fluids
Top Cited Papers
Open Access
- 1 January 2026
- journal article
- Published by National Library of Serbia in Thermal Science
- Vol. 30 (1 Part B) , 629-641
Abstract
The widespread use of atomizers for fuel spraying in combustion chambers or water spraying for cooling purposes has made them attractive subjects for research. This study investigates the interaction of internal mixing high-velocity air-flow with the spray of three fluids in a pressure swirl atomizer. The research was conducted using the numerical solution method, supported by experimental data, which demonstrated good agreement between the simulation and experimental results. The findings revealed that adding 0.02 kg/s of high-velocity airflow at 300 K to the spray of three liquids, namely water, normal heptane, and kerosene, each at a mass-flow rate of 0.08 kg/s, reduced the fluid film thickness by 79.82%, 77.36%, and 76.87%, respectively. This reduction subsequently resulted in a significant decrease in the Sauter mean diameter by 96.99%, 96.12%, and 95.94%, respectively. Additionally, the results indicated that the addition of high-velocity airflow slightly increased the spray cone angle for kerosene and normal heptane, but caused the water spray to collapse and move out of its intended pattern. The study also found that high-velocity air-flow dramatically increased the turbulence kinetic energy for the spray of all three liquids, with a more pronounced effect observed in the water spray. These results can guide researchers in understanding the effects of high-velocity air-flow on spray dynamics and assist engineers in designing and manufacturing atomizers with optimal performance.Keywords
This publication has 59 references indexed in Scilit:
- Numerical Analysis of Ultrasonic Spot Welding of Cu/Cu JointsJournal of Materials Engineering and Performance, 2025
- Experimental and Numerical Study on Inlet Pressure and Reynolds Number in Tangential Input Pressure-Swirl AtomizerArabian Journal for Science and Engineering, 2025
- Numerical investigation of the impact of fuel temperature on spray characteristics in a pressure-swirl atomizer with spiral pathExperimental and Computational Multiphase Flow, 2024
- Investigation on pressure-swirl atomization for cooling and efficiency improvement of photovoltaic moduleApplied Thermal Engineering, 2024
- Numerical Investigation of Turbulence Models for Swirling Nitrogen/Air2023
- Effect of geometric parameters on spray characteristics of air assisted pressure swirl atomizerAlexandria Engineering Journal, 2022
- Numerical investigation of water droplet behavior in anode channel of a PEM fuel cell with partial blockageArchive of Applied Mechanics, 2020
- Study of spiral path angle in pressure-swirl atomizer with spiral pathArchive of Applied Mechanics, 2020
- On-line statistical combustion phase optimization and control of SI gasoline enginesApplied Thermal Engineering, 2017
- Cylinder pressure sensor‐based real‐time combustion phase control approach for SI enginesIEEJ Transactions on Electrical and Electronic Engineering, 2016