Prediction Method for Condensation Heat Transfer in the Presence of Noncondensable Gas for Computational Fluid Dynamics Applications
- 26 May 2022
- journal article
- research article
- Published by ASME International in Journal of Nuclear Engineering and Radiation Science
- Vol. 8 (3)
Abstract
The objective of this study was to present a prediction method for condensation heat transfer in the presence of non-condensable gas (air or nitrogen) for CFD (computational fluid dynamics) analyses, where physical quantities in the computational cells in contact with the structural wall are generally used. First by using existing temperature distributions T(y) in the turbulent boundary layer along a flat plate as functions of the distance y from the condensation surface, we evaluated the distribution of condensation heat flux qc,pre(y) from the gradient of steam concentration, we derived a modification factor η(y+) as a function of the dimensionless distance y+ to obtain a good agreement with qc,cal calculated by the qc correlation defined by using the bulk quantities; and we obtained qc,mod(y)/qc,cal = 0.90-1.10 for the region of y+ > 17. Second we modified the local Sherwood number Sh(x) for flat plates for the boundary layer thickness d and obtained the function Sh(d). An existing qc correlation for flat plates as a function of Sh(d) was applied to predict the distribution of the local value qc,pre(y), and qc,pre(y)/qc,cal = 0.95-1.15 in the best case was obtained for the region of y+ > 30. Finally a correlation of the local Sherwood number Sh(y) was derived from the temperature distributions T(y) as a function of the local Reynolds number Re(y).Keywords
This publication has 14 references indexed in Scilit:
- Measurements of Temperature Distributions and Condensation Heat Fluxes for Downward Flows of Steam-Air Mixture in a Circular PipeJAPANESE JOURNAL OF MULTIPHASE FLOW, 2019
- Review of vapor condensation heat and mass transfer in the presence of non-condensable gasApplied Thermal Engineering, 2015
- CFD simulation of air–steam flow with condensationNuclear Engineering and Design, 2014
- Prediction of steam condensation in the presence of noncondensable gases using a CFD-based approachNuclear Engineering and Design, 2013
- Analysis of the suction effect on the mass transfer when using the heat and mass transfer analogyNuclear Engineering and Design, 2009
- Review on condensation on the containment structuresProgress in Nuclear Energy, 2009
- A Generalized Diffusion Layer Model for Condensation of Vapor With Noncondensable GasesJournal of Heat Transfer, 2006
- Characteristics of film condensation of supersaturated steam–air mixture on a flat plateInternational Journal of Multiphase Flow, 1999
- Measurement of Condensation Heat Transfer Coefficient inside a Vertical Tube in the Presence of Noncondensable GasJournal of Nuclear Science and Technology, 1995
- Heat and mass transfer with condensation in laminar and turbulent boundary layers along a flat plateInternational Journal of Heat and Mass Transfer, 1986