Bio-Inspired Circular-Polarized UHF RFID Tag Design Using Characteristic Mode Analysis
- 3 April 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (10) , 10847-10855
Abstract
This paper presents a bio-inspired circularly polarized ultra-high frequency (UHF) radio frequency identification (RFID) tag antenna for metallic and low-permittivity substances. This tag design is based on a leaf-shaped radiator, two shorting stubs and slots etched on F4B substrate. Initially, the tag antenna is designed using characteristics mode analysis (CMA) by analyzing the first six CM modes and characteristic angles. The width of orthogonal slots is varied to get the resonance of CM modes in the required US RFID band. Moreover, the edges are blended to get orthogonal current distribution, which is necessary for circular polarization. Additionally, the proposed tag design is optimized further using CST Microwave studio and an RFID chip is exploited as a capacitive coupling element (CCE) to run CM modes with the orthogonal current pattern. This tag can also be tunable to European RFID (EU) band (866 – 868 MHz) by changing the length of shorter diagonal slot. The tag design offers a read range of 7 m and 4.5 m on 100 × 100 mm 2 metals plate and low-permittivity substrates, respectively (for 902 – 928 MHz band). In EU band, the corresponding read ranges are 5.7 m and 3.5 m above metal and low-permittivity objects, respectively. This circularly polarized tag antenna is advantageous in terms of cost, circular polarization feature, and ease of fabrication due to the absence of vias, shorting pins, and matching circuits. Therefore, this tag design is suitable for labeling various low-permittivity objects, industrial conveyer belt applications, baggage handling systems, and IoT applications.Keywords
Funding Information
- Deanship of Scientific Research at Northern Border University, Arar, KSA (NBU-FFR-2023-0006)
This publication has 28 references indexed in Scilit:
- Characteristic Mode Design of Wide Band Circularly Polarized Patch Antenna Consisting of H-Shaped Unit CellsIEEE Access, 2018
- Bio-Inspired Microstrip Antenna2017
- Planar Compact Square-Ring Tag Antenna With Circular Polarization for UHF RFID ApplicationsIEEE Transactions on Antennas and Propagation, 2016
- Passive UHF RFID Tag for Multispectral AssessmentSensors, 2016
- Characteristic Modes2015
- A Compact Circularly Polarized Crossed-Dipole Antenna for an RFID TagIEEE Antennas and Wireless Propagation Letters, 2014
- Circularly Polarized Loop Tag Antenna for Long Reading Range RFID ApplicationsIEEE Antennas and Wireless Propagation Letters, 2013
- Design of Antennas for UHF RFID TagsProceedings of the IEEE, 2012
- The Effect of Circularly Polarized Light on the Growth of PlantsInternational Journal of Botany, 2010
- The Theory of Characteristic Modes Revisited: A Contribution to the Design of Antennas for Modern ApplicationsIEEE Antennas and Propagation Magazine, 2007