Effect of nano TiC on microstructure and microhardness of composite additive manufacturing 316L stainless steel
Open Access
- 1 December 2021
- journal article
- research article
- Published by IOP Publishing in Materials Research Express
- Vol. 8 (12) , 126521
Abstract
The lower surface hardness limits the further application of 316 L stainless steel. In this study, selective laser melting (SLM)/laser metal deposition (LMD) composite additive manufacturing technology was used to prepare five kinds of 316L-nano-TiC cermet strengthening layers on the surface of 316L stainless steel, and to study the effect of nano-TiC particle content on the microstructure and the influence of microhardness. Use Laser microscope, scanning electron microscope (SEM), X-ray diffractometer (XRD) to analyze the structure, element distribution and phase composition of the strengthening layer. The hardness of the strengthened layer was analyzed using a Vickers micro-hardness tester. The study found that the composite SLM/LMD formed samples changed continuously from LMD forming to SLM forming, showing good metallurgical bonding. Diffusion of TiC particles was observed in the SLM strengthening layer, and TiC phase was detected in the strengthening layer. Compared with the 316L matrix, the microhardness of the strengthened layer is significantly improved. When 50 wt% TiC is added, the average hardness of the strengthened layer is 1.9 times that of the 316L matrix, and the highest is 408.9 HV. The results of this study show that the strengthening layer manufactured by composite additive materials can effectively improve the hardness of the 316L stainless steel matrix. As the content of nano-TiC in the preset powder increases, the microhardness of the strengthening layer first increases and then decreases, and the hardness of the 50wt% TiC strengthening layer is the highest. There are distributed nano-TiC particles in the structure of the strengthening layer, and the distribution of nano-TiC particles in the 50wt% TiC strengthening layer is more uniform than other samples. This research provides a new reference for the strengthening of 316L stainless steel through SLM/LMD composite additive manufacturing technology and the addition of nano-TiC particles.Keywords
This publication has 39 references indexed in Scilit:
- Corrosion properties of bioresorbable FeMn‐Ag alloys prepared by selective laser meltingMaterials and Corrosion, 2017
- A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding depositionMaterials Science and Engineering: A, 2017
- Studies on Interfacial Phenomena in Titanium Carbide/Liquid Steel Systems for Development of Functionally Graded MaterialMetallurgical and Materials Transactions B, 2016
- Microstructure and properties of TiC-high manganese steel cermet prepared by different sintering processesJournal of Alloys and Compounds, 2015
- Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiCSurface and Coatings Technology, 2012
- A microcantilever investigation of size effect, solid-solution strengthening and second-phase strengthening for 〈a〉 prism slip in alpha-TiActa Materialia, 2011
- The effect of production method on properties of Fe–TiC compositeInternational Journal of Mineral Processing, 2010
- TiB2 and TiC stainless steel matrix compositesMaterials Letters, 2007
- Microstructure and hardness improvement of TiC/stainless steel surface composites fabricated by high-energy electron beam irradiationMaterials Science and Engineering: A, 2002
- Microhardness measurements and the Hall-Petch relationship in an AlMg alloy with submicrometer grain sizeActa Materialia, 1996