Evolution of the Structural State and Properties of 32CrB4 Steel during the Production of High-Strength Fasteners
Open Access
Abstract
For the production of high-strength fasteners, bar sections are used, which must withstand significant cold plastic deformation and, therefore, are subjected to a special heat treatment. In the present work, the dependences of the microstructure and mechanical properties of round bars with diameters of 17 mm and 21 mm made of 32CrB4 steel on the heat treatment modes are established. During the study, the methods of optical and scanning electron microscopy, mechanical tests, and hardness measurements were used. Dependences of the degree of spheroidization of the ferrite–pearlite structure and mechanical properties on the spheroidizing annealing mode have been established. It is shown that preliminary obtainment of a bainitic or martensitic structure of rolled products after hot-rolling of steel accelerates the process of pearlite spheroidization. Additional heat treatment, including austenitizing, quenching, and tempering, allows obtaining fasteners of various strength classes: 8.8, 9.8, and 10.9. However, with a guaranteed receipt of strength characteristics for all strength classes, including 12.9, the problem arises of achieving the required values of the relative elongation of steel.Keywords
Funding Information
- Ministry of Industry and Trade of Russian Federation (State contract identifier No.0000000002020PWF0002)
This publication has 19 references indexed in Scilit:
- On-line spheroidization process of medium-carbon low-alloyed cold heading steelInternational Journal of Minerals, Metallurgy and Materials, 2014
- Improvement of Hole-Expansion Property for Medium Carbon Steels by Ultra Fast Cooling After Hot Strip RollingJournal of Iron and Steel Research International, 2013
- Mechanism of accelerated spheroidization of steel during cyclic heat treatment around the upper critical temperaturePhilosophical Magazine Letters, 2013
- Improvement in the spheroidizing annealing of low-carbon steel for cold upsettingSteel in Translation, 2012
- Carbide morphology in steel subjected to cold deformationSteel in Translation, 2011
- An Alternate Approach to Accelerated Spheroidization in Steel by Cyclic AnnealingJournal of Materials Engineering and Performance, 2010
- Influence of different initial microstructure on the process of spheroidization in cold forgingMaterials & Design (1980-2015), 2008
- A Vision of Wire Rod Rolling Technology for the Twenty First CenturyAdvanced Materials Research, 2007
- Promising Sparingly Alloyed Boron-Bearing Steels for the Production of High-Strength FastenersMetal Science and Heat Treatment, 2005
- Spheroidization cycles for medium carbon steelsMetallurgical and Materials Transactions A, 2002