Three-Parameter Kinematic Theory for Shear-Dominated Reinforced Concrete Walls
- 1 July 2016
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 142 (7)
Abstract
This paper is aimed at addressing the need for physically accurate and computationally effective models for predicting the response of shear-dominated reinforced concrete walls. The presented theory is based on a three-degree-of-freedom kinematic model for the deformation patterns in walls with aspect ratios smaller than approximately 3. In the kinematic model, the wall is divided into two parts—a rigid block and a fan of struts—by a diagonal crack. The mechanisms of shear resistance across this crack are modeled with nonlinear springs to capture the prepeak and postpeak shear behavior of the member. The base section of the wall is also modeled to account for yielding of the reinforcement and crushing of the concrete. It is shown that this approach captures well the global and local deformations measured in a test specimen with detailed instrumentation. A more comprehensive validation of the theory is performed with 34 wall tests from the literature. The obtained peak load experimental-to-predicte...Keywords
This publication has 8 references indexed in Scilit:
- Seismic Behavior of Low-Aspect-Ratio Reinforced Concrete Shear WallsACI Structural Journal, 2015
- Flexure-controlled ultimate deformations of members with continuous or lap-spliced barsStructural Concrete, 2010
- Seismic Rehabilitation of Existing Buildings2007
- Effect of boundary element details on the seismic deformation capacity of structural wallsEarthquake Engineering & Structural Dynamics, 2002
- An analytical model to predict the inelastic seismic behavior of shear-wall, reinforced concrete structuresEngineering Structures, 2002
- Theoretical Stress‐Strain Model for Confined ConcreteJournal of Structural Engineering, 1988
- Bruchversuche an Stahlbetonscheiben1985
- Coupling Beams of Reinforced Concrete Shear WallsJournal of the Structural Division, 1971