Performance Optimization of Alkaline Multi-Industrial Waste-Based Cementitious Materials for Soil Solidification
Open Access
Abstract
This study presents the development of eco-friendly cementitious materials for soil stabilization, based on alkaline multi-industrial waste (AMIW), using steel slag (SS), blast furnace slag (BFS), carbide slag (CS), fly ash (FA) and flue gas desulfurization gypsum (FGDG) as the raw materials. The optimal AMIW-based cementitious material composition determined through orthogonal experiments was SS:CS:FGDG:BFS:FA = 15:10:15:44:16. Central composite design (CCD) in response surface methodology (RSM) was employed to optimize the curing process parameters. The maximum 7-day unconfined compressive strength (7d UCS) was achieved under the optimal conditions of 18.51% moisture content, 11.46% curing agent content and 26.48 min of mix-grinding time. The 7d UCS of the AMIW-stabilized soil showed a 24% improvement over ordinary Portland cement (OPC)-stabilized soil. Rietveld refinement results demonstrated that the main hydration products of the stabilized soil were C-S-H and ettringite. After curing for 7 days to 28 days, the C-S-H content increased from 3.31% to 5.76%, while the ettringite content increased from 1.41% to 3.54%. Mercury intrusion porosimetry (MIP) and scanning electron microscopy (SEM) analysis revealed that with the extension of curing time, the pores of the stabilized soil become smaller and the structure becomes denser, resulting in an improvement in compressive strength.Keywords
Funding Information
- Hebei Provincial Key Research Projects (22373809D, FRF-TP-22-118A1)
- Fundamental Research Funds for the Central Universities (22373809D, FRF-TP-22-118A1)
This publication has 43 references indexed in Scilit:
- Utilization of Portland cement with limestone powder and cement kiln dust for stabilization/solidification of oil-contaminated marl soilEnvironmental Science and Pollution Research, 2020
- Characteristics of Engineered Waste Materials Used for Road Subbase LayersKSCE Journal of Civil Engineering, 2020
- Usage of supplementary cementitious materials: advantages and limitationsJournal of Thermal Analysis and Calorimetry, 2020
- Particle size manipulation as an influential parameter in the development of mechanical properties in electric arc furnace slag-based AAMCeramics International, 2019
- Industrial wastes applications for alkalinity regulation in bauxite residue: A comprehensive reviewJournal of Central South University, 2019
- Effects of applying flue gas desulfurization gypsum and humic acid on soil physicochemical properties and rapeseed yield of a saline-sodic cropland in the eastern coastal area of ChinaJournal of Soils and Sediments, 2015
- Review of nanocarbon-engineered multifunctional cementitious compositesComposites Part A: Applied Science and Manufacturing, 2015
- Supplementary cementitious materialsCement and Concrete Research, 2011
- Response surface methodologyWIREs Computational Statistics, 2010
- Properties and hydration of blended cements with steelmaking slagCement and Concrete Research, 2007