Enhancing Mechanical Properties of PC/ABS Compound through Compatibilizers and Investigation of Morphology and Flammability of the Improved Compound: A Comprehensive Study
- 30 January 2024
- journal article
- research article
- Published by ASTM International in Materials Performance and Characterization
- Vol. 13 (1) , 72-83
Abstract
This work investigates the effect of four different compatibilizers on the mechanical and thermal properties (impact, tensile strength, elongation, flexural modulus, and heat deflection temperature) of polycarbonate (PC)/acrylonitrile-butadiene-styrene (ABS) blends. The compatibilizers studied were styrene-ethylene-butylene-styrene (SEBS) grafted (g) with maleic anhydride (MAH), polystyrene (PS)-g-MAH, ABS-g-MAH, and ethylene-vinyl acetate (EVA)-g-MAH. The compatibility of the improved sample was also studied using scanning electron microscope images. In addition, the flammability of the improved sample with 8 % decabromodiphenyl ethane (DBDPE) as a flame-retardant (FR) additive was measured by limiting oxidation index and UL 94. The blends with a 70/30 ratio of PC/ABS and varying percentages of compatibilizers (1, 3, and 6 %) were prepared using a twin-screw extruder, and samples for mechanical tests were produced by injection molding. The mechanical properties indicated that PS-g-MAH was better than other compatibilizers. Compared with pure PC and ABS, the PC30P3-FR blend was an economical and versatile compound with potential applications in the electrical and electronic industries.Keywords
This publication has 28 references indexed in Scilit:
- Effect of EVA-g-MAH on Mechanical Properties of PC/ABS BlendsPolymer-Plastics Technology and Engineering, 2012
- Flame retardancy mechanisms of phosphorus‐containing polyhedral oligomeric silsesquioxane (DOPO‐POSS) in polycarbonate/acrylonitrile‐butadiene‐styrene blendsPolymers for Advanced Technologies, 2011
- Weld line characteristics of PC/ABS blend. II. Effect of reactive compatibilizerJournal of Applied Polymer Science, 2008
- Flame retardancy mechanisms of triphenyl phosphate, resorcinol bis(diphenyl phosphate) and bisphenol A bis(diphenyl phosphate) in polycarbonate/acrylonitrile–butadiene–styrene blendsPolymer International, 2007
- Influence of rubber content in ABS in wide range on the mechanical properties and morphology of PC/ABS blends with different compositionPolymer Engineering & Science, 2006
- Properties of acrylonitrile–butadiene–styrene/polycarbonate blends with styrene–butadiene–styrene block copolymerJournal of Applied Polymer Science, 2004
- New halogen‐free fire retardant for engineering plastic applicationsJournal of Vinyl and Additive Technology, 2001
- Effects of ABS‐g‐MAH on mechanical properties and compatibility of ABS/PC alloyJournal of Applied Polymer Science, 2001
- Effects of viscosity ratio and compatibilizers on the morphology and mechanical properties of polycarbonate/acrylonitrile‐butadiene‐styrene blendsPolymer Engineering & Science, 1999
- Phase morphology of injection-moulded polycarbonate/acrylonitrile-butadiene-styrene blendsPolymer, 1992