Influence of Three-Dimensional Roughness on Pressure-Driven Flow Through Microchannels
- 1 September 2003
- journal article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 125 (5) , 871-879
Abstract
Surface roughness is present in most of the microfluidic devices due to the microfabrication techniques or particle adhesion. It is highly desirable to understand the roughness effect on microscale flow. In this study, we developed a three-dimensional finite-volume-based numerical model to simulate pressure-driven liquid flow in microchannels with rectangular prism rough elements on the surfaces. Both symmetrical and asymmetric roughness element arrangements were considered, and the influence of the roughness on pressure drop was examined. The three-dimensional numerical solution shows significant effects of surface roughness in terms of the rough elements’ height, size, spacing, and the channel height on both the velocity distribution and the pressure drop. The compression-expansion flow around the three-dimensional roughness elements and the flow blockage caused by the roughness in the microchannel were discussed. An expression of the relative channel height reduction due to roughness effect was presented.Keywords
This publication has 10 references indexed in Scilit:
- Heat transfer for water flow in trapezoidal silicon microchannelsInternational Journal of Heat and Mass Transfer, 2000
- Pressure-driven water flows in trapezoidal silicon microchannelsInternational Journal of Heat and Mass Transfer, 2000
- Liquid transport in rectangular microchannels by electroosmotic pumpingColloids and Surfaces A: Physicochemical and Engineering Aspects, 2000
- Flow characteristics of water in microtubesInternational Journal of Heat and Fluid Flow, 1999
- A microfabricated device for sizing and sorting DNA moleculesProceedings of the National Academy of Sciences, 1999
- Analysis of electrokinetic effects on the liquid flow in rectangular microchannelsColloids and Surfaces A: Physicochemical and Engineering Aspects, 1998
- Convective heat transfer and pressure drop characteristics of various array configurations to simulate the cooling of electronic modulesInternational Journal of Heat and Mass Transfer, 1996
- A Numerical Study of Laminar and Turbulent Heat Transfer in a Periodically Corrugated Wall ChannelJournal of Heat Transfer, 1985
- Heat transfer and pressure drop characteristics of arrays of rectangular modules encountered in electronic equipmentInternational Journal of Heat and Mass Transfer, 1982
- Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-Periodic Variations of Cross-Sectional AreaJournal of Heat Transfer, 1977