Influence of different composite curing agents on the rapid curing characteristics and mechanical performance of epoxy resins
Open Access
- 1 October 2024
- journal article
- research article
- Published by AIP Publishing in AIP Advances
- Vol. 14 (10)
Abstract
To address the need for rapid in situ plugging and repair of hydraulic machinery and chemical pipelines and to resolve the issue that a single curing agent cannot simultaneously achieve rapid curing and excellent mechanical properties in epoxy resin systems, this study explores the use of composite curing agents. In particular, effective formulations are designed for mixing fast and slow curing agents, studying their effects on the curing behavior, curing quality, and mechanical properties of epoxy resins and elucidating their influence mechanisms. The results indicate that three resin systems meet the requirements for rapid curing (curing time within 30 min): 4A6B/EP, 2A8B/EP, and 0A10B/EP. Among them, 4A6B/EP exhibits the best curing quality and mechanical properties. In particular, 4A6B/EP demonstrates the lowest values of curing shrinkage rate, internal curing stress, average pore size, porosity, and cumulative pore volume. Its low internal stress and low defects reduce the stress concentration, while more efficient deflection and branching of internal cracks enhance its deformation resistance. Consequently, 4A6B/EP shows the highest microhardness, fracture toughness, tensile strength, Young’s modulus, and elongation after fracture. Based on the comprehensive evaluation of rapid curing characteristics and mechanical properties, the 4A6B/EP system offers the best overall performance. Therefore, it is recommended as the preferred resin system for rapid plugging and repair of composite materials, providing a theoretical basis and technical support for boosting the application of epoxy resin composite materials in high-tech fields.Keywords
Funding Information
- Natural Science Foundation of China (51708553)
This publication has 20 references indexed in Scilit:
- Environmental and economical friendly ultra-high performance-concrete incorporating appropriate quarry-stone powdersJournal of Cleaner Production, 2020
- Synthesis of isocyanurate‐based imidazole carboxylate as thermal latent curing accelerator for thermosetting epoxy resinsJournal of Applied Polymer Science, 2020
- Thermal latent curing agent for epoxy resins from neutralization of 2‐methylimidazole with a phosphazene‐containing polyfunctional carboxylic acidPolymers for Advanced Technologies, 2020
- The chemical and microstructural analysis of the adhesive properties of epoxy resin coatings modified using waste glass powderApplied Surface Science, 2020
- A comparative study of epoxy resin cured with a linear diamine and a branched polyamineChemical Engineering Journal, 2012
- DGEBA thermosets modified with an amphiphilic star polymer. Study on the effect of the initiator on the curing process and morphologyPolymer, 2011
- Crosslinking of mixtures of DGEBA with 1,6-dioxaspiro[4,4]nonan-2,7-dione initiated by tertiary amines. Part IV. Effect of hydroxyl groups on initiation and curing kineticsPolymer, 2010
- Dynamic mechanical analysis of carbon/epoxy composites for structural pipeline repairComposites Part B: Engineering, 2007
- A generalized criterion for rubber toughening: The critical matrix ligament thicknessJournal of Applied Polymer Science, 1988
- Kinetic analysis of derivative curves in thermal analysisJournal of Thermal Analysis and Calorimetry, 1970