The influence of compatibilizers on the structure and mechanical properties of lightweight reinforced thermoplastics
Authors:
- 9 August 2016
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 39 (7) , 2212-2223
Abstract
Lightweight reinforced thermoplastics (LWRT) have a low density and high rigidity. The application of LWRTs to automotive interiors, such as headliners and instrument panels, is very promising. The porous structure of LWRTs is formed in the process of deconsolidation, so pores may appear between the matrix and fibers that interrupt the transfer of stress and deteriorate the mechanical properties. In this article, maleic anhydride‐grafted polypropylene (PP‐g‐MAH) and glycidyl methacrylate‐grafted polypropylene were selected to study the influence of compatibilizers on the structural and mechanical properties of an LWRT. It was found that the modification effect of PP‐g‐MAH is more significant. Before the mass fraction of PP‐g‐MAH reaches 20%, the tensile and flexural properties of the LWRT increased with the PP‐g‐MAH content. The required content of PP‐g‐MAH in the LWRT is high compared with the voidless composites. Structures with a good matrix distribution and dispersion are anticipated in LWRTs, which are not considered in voidless composites. POLYM. COMPOS., 39:2212–2223, 2018. © 2016 Society of Plastics EngineersKeywords
Funding Information
- National Natural Science Foundation of China (21376086)
This publication has 23 references indexed in Scilit:
- Bio-composites of kenaf fibers in polylactide: Role of improved interfacial adhesion in the carding processComposites Science and Technology, 2009
- Tensile and fracture behavior of polymer foamsMaterials Science and Engineering: A, 2006
- Deconsolidation in glass mat thermoplastic composites: Analysis of the mechanismsComposites Part A: Applied Science and Manufacturing, 2005
- Effects of the chemical foaming agents, injection parameters, and melt‐flow index on the microstructure and mechanical properties of microcellular injection‐molded wood‐fiber/polypropylene compositesJournal of Applied Polymer Science, 2005
- Thermal de-consolidation of thermoplastic matrix composites—I. Growth of voidsComposites Science and Technology, 2002
- Effect of the microstructure of GMT on its mechanical propertiesPolymer Composites, 2002
- Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: 4. Impact propertiesComposites Part A: Applied Science and Manufacturing, 1997
- Fracture of fiber reinforced compositesPolymer Engineering & Science, 1976
- Fracture mechanisms in glass-reinforced plasticsJournal of Materials Science, 1975
- Estimation of the surface free energy of polymersJournal of Applied Polymer Science, 1969