Three-dimensional Finite Element Buckling Analysis of Debonded Sandwich Panels
Authors:
- 1 June 2006
- journal article
- research article
- Published by SAGE Publications in Journal of Composite Materials
- Vol. 40 (11) , 993-1008
Abstract
A three-dimensional (3D) finite element analysis has been conducted to examine the local buckling behavior of foam-cored composite sandwich panels containing a face-core debond. The influences of core stiffness and debond size and shape are examined. The core stiffness was found to have a profound influence on the local buckling load, especially for low modulus cores and smaller debonds. Panels with square debonds buckled at lower loads than those with circular debonds of the same dimension, and buckling loads for both circular and square debonds decreased with increased debond size. The results of the analysis were compared to local buckling loads determined experimentally. Reasonable agreement was found between the predicted and experimentally measured local buckling loads for both circular and square debonds.Keywords
This publication has 14 references indexed in Scilit:
- Elastic foundation analysis of local face buckling in debonded sandwich columnsMechanics of Materials, 2005
- Experimental investigation of compression failure of sandwich specimens with face/core debondComposites Part B: Engineering, 2004
- Failure Mechanisms and Modelling of Impact Damage in Sandwich Beams - A 2D Approach: Part II - Analysis and ModellingJournal of Sandwich Structures & Materials, 2003
- Buckling of a Thin Face Layer on Winkler Foundation with DebondsJournal of Sandwich Structures & Materials, 1999
- A theoretical and experimental investigation of buckling induced delamination growthJournal of the Mechanics and Physics of Solids, 1993
- Two-Dimensional Delamination Growth in Composite Laminates Under Compression Loading1988
- The Buckling of a Delaminated Sublaminate on an Elastic FoundationJournal of Composite Materials, 1987
- Two-Dimensional Modelling of Compressive Failure in Delaminated LaminatesJournal of Composite Materials, 1985
- Finite Element Analysis of Instability Related Delamination GrowthJournal of Composite Materials, 1981
- One dimensional modelling of failure in laminated plates by delamination bucklingInternational Journal of Solids and Structures, 1981