Additive Manufacturing of Bioresorbable Tracheal Stents from PDO/PCL Blends: Effects of Composition and Processing on Structure and Properties
Open Access
- 26 September 2026
- Vol. 19 (19) , 4117
Abstract
Fused deposition modeling (FDM) is an additive manufacturing (AM) technology that enables the fabrication of complex and patient-specific devices made of biodegradable polymers. The successful implementation of the process requires exhaustive control of the workflow, focusing on material selection, device design, and manufacturing parameters. The aim of this study is to evaluate and compare the printability, processability, and mechanical performance of a polymer blend for the fabrication of customized airway stents using FDM printing, with a focus on its potential industrial scalability. Two FDM manufacturing approaches were evaluated using standard geometries to manufacture a blend of biodegradable polymers, using either filaments or pellets as feedstock. Moreover, the suitability of a blend made of polycaprolactone (PCL) and polydioxanone (PDO) for manufacturing tracheal stents was studied in comparison to their pure forms. Regarding the manufacturing technology, the feeding method itself was not the primary factor affecting the mechanical properties of the printed components, which was directly related to the geometry of the device and the cooling time polymers required. Furthermore, although the PCL/PDO blend showed a slightly higher mean elastic modulus than pure PCL, the resulting material did not exhibit sufficient radial resistance for airway stent applications. The design and development of 3D-printed medical devices require an evaluation of the entire manufacturing workflow. Device geometry and material selection are strongly influenced by the manufacturing technology selected and have a direct impact on the mechanical performance of the final product.Keywords
Funding Information
- Spanish Ministry of Science and Innovation (PID2021-125731OB-C31)
- Spanish Ministry of Science and Innovation (PID2021-125731OB-C32)
- Government of Navarre
This publication has 32 references indexed in Scilit:
- The 3D printing of biodegradable polydioxanone by means of fused filament fabrication: printing from a surgical sutureProgress in Additive Manufacturing, 2026
- Hybrid Pellet–Filament Co-extrusion for Customizing Flexibility and Strength in 3D-Printed PartsIntegrating Materials and Manufacturing Innovation, 2026
- A Tri‐Polymer‐Åkermanite Electrospun Scaffold for Enhanced Bone RegenerationJournal of Applied Polymer Science, 2025
- Quantified Phase Diagram of PCL/PDO Using the Cole–Cole Plot AnalysisMacromolecular Theory and Simulations, 2025
- A bi-material FDM system with reinforced mixing and cooling for uniform material mixing and broad functionalityProgress in Additive Manufacturing, 2024
- Investigation on the onset and progress of stress whitening in polypropylene using digital image processingPolymer Bulletin, 2023
- A Comparative Study of an Anti-Thrombotic Small-Diameter Vascular Graft with Commercially Available e-PTFE Graft in a Porcine Carotid ModelTissue Engineering and Regenerative Medicine, 2022
- Processing of poly-l-lactide and poly(l-lactide-co-trimethylene carbonate) blends by fused filament fabrication and fused granulate fabrication using RepRap 3D printerThe International Journal of Advanced Manufacturing Technology, 2020
- The Mechanical Properties of Endovascular Stents: An In Vitro AssessmentCardiovascular Engineering, 2010
- Biodegradable studies of poly(trimethylenecarbonate‐ε‐caprolactone)‐block‐poly(p‐dioxanone), poly(dioxanone), and poly(glycolide‐ε‐caprolactone) (Monocryl®) monofilamentsJournal of Applied Polymer Science, 2006